Schneider Electric JRA36200 Molded Case Circuit Breaker 600V 200A

(No reviews yet) Write a Review
SKU:
JRA36200
UPC:
785901272311
Condition:
New
Mounting Support:
bracket
Product Or Component Type:
circuit breaker
Ambient Air Temperature For Operation:
-2-70 °C
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Magnetic Hold Current:
1000 A
[Ui] Rated Insulation Voltage:
750 V IEC 60947-2
Pollution Degree:
3
Suitability For Isolation:
yes IEC 60947-2
Net Weight:
2.4 kg
Product Certifications:
UL || CSA || NOM
Mounting Mode:
I-Line bracket)
Magnetic Tripping Current:
2000-2000 A
Electrical Connection:
I-Line connection, line || lugs, load
Continuous Current Rating:
0.8
[Uimp] Rated Impulse Withstand Voltage:
8 kV IEC 60947-2
Operating Altitude:
< 6561.68 ft (2000 m) without derating || 5000 m with derating
Awg Gauge:
AWG 3/0...350 kcmil aluminium/copper terminals
Rohs Exemption Information:
Yes
Poles Description:
3P
Utilisation Category:
category A
Environmental Disclosure:
ENVPEP2206031EN
Number Of Slots:
2 auxiliary switch OF plug-in) || 1 alarm switch SD plug-in) || 1 overcurrent trip switch SDE plug-in) || 1 voltage release MN or MX plug-in)
Circuit Breaker Application:
HACR rated
Ambient Air Temperature For Storage:
-50-85 °C
Mounting Height:
4.5 in
Ip Degree Of Protection:
front cover IP40
Long Time Pick-Up Adjustment Range:
0.25...1 x In
Width:
104 mm
Quality Labels:
CE
Standards:
UL || CSA || NEMA || NOM-003-SCFI-2000 || IEC 60947-2
Network Frequency:
50/60 Hz
California Proposition 65:
WARNING: This product can expose you to chemicals including: DINP, which is known to the State of California to cause cancer, and DIDP, which is known to the State of California to cause birth defects or other reproductive harm. For more information
Trip Unit Technology:
thermal-magnetic
Line Rated Current:
200-200 A
Breaking Capacity Code:
R
Eu Rohs Directive:
Compliant with Exemptions
[Ue] Rated Operational Voltage:
600 V AC 50/60 Hz IEC 60947-3
Depth:
86 mm
Height:
191 mm
Pvc Free:
Yes
Wire Stripping Length:
25 mm
Phase Connection:
ABC
Tightening Torque:
25-25 N.m 95-185 mm² (AWG 3/0...350 kcmil)
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Communication Interface:
Modbus
Terminal Identifier:
AL250JD
Breaking Capacity:
200 kA 240 V AC 50/60 Hz UL 489 || 200 kA 480 V AC 50/60 Hz UL 489 || 100 kA 600 V AC 50/60 Hz UL 489
Sustainable Offer Status:
Green Premium product
Protection Type:
overload protection || short-circuit protection
Mercury Free:
Yes
Circularity Profile:
ENVEOLI2206031EN
Control Type:
toggle
Local Signalling:
switched off (OFF) 1 trip indicator green)
[Ics] Rated Service Breaking Capacity:
150 kA 220/240 V AC 50/60 Hz IEC 60947-2 || 125 kA 380/440/415 V AC 50/60 Hz IEC 60947-2 || 75 kA 500/525 V AC 50/60 Hz IEC 60947-2 || 20 kA 690 V AC 50/60 Hz IEC 60947-2
Brochure:
View
Catalog:
View
Datasheet:
View
$9,489.00

Description

PowerPacT J-Frame circuit breakers are designed to protect electrical systems from damage caused by overloads and short circuits. PowerPacT J-Frame circuit breakers are available with either thermal magnetic or MicroLogic electronic trip protection units. This PowerPacT J-Frame circuit breaker provides thermal magnetic circuit protection with a breaking capacity of 100kA at 600VAC. All PowerPacT J-Frame circuit breakers are equipped with dual-break rotating contacts that reduce the amount of peak current during a short circuit fault. All PowerPacT circuit breakers have an integral push-to-trip button in the cover to manually trip the circuit breaker. PowerPacT J circuit breakers are available in 2 and 3-pole unit mount and I-Line constructions. PowerPacT J I-Line circuit breakers are available in I-Line construction for easy installation and removal in I-Line applications. This unit has I-Line terminations on the line side and mechanical lugs on the load side. This PowerPacT J, 200A, 3 pole, circuit breaker has a breaking capacity of 100kA at 600VAC. This circuit breaker has a continuous current rating of 80% with an ABC phase connection. PowerPacT J circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked.
View AllClose