Schneider Electric LDA36400CU31X Molded Case Circuit Breaker 600V 400A

(No reviews yet) Write a Review
SKU:
LDA36400CU31X
UPC:
7.85901E+11
Condition:
New
Communication Interface:
Modbus || Ethernet
Rohs Exemption Information:
Yes
Device Short Name:
L-Frame
Mounting Support:
bracket
Mounting Mode:
I-Line bracket)
Color:
Black
Product Name:
PowerPact L
Long Time Pick-Up Adjustment Range:
0.25...1 x In
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Breaking Capacity:
25 kA 240 V AC 50/60 Hz UL 489 || 18 kA 480 V AC 50/60 Hz UL 489 || 14 kA 600 V AC 50/60 Hz UL 489 || 20 kA 250 V DC UL 489
Pollution Degree:
3 IEC 60947-1
Circularity Profile:
ENVEOLI2206029EN
Device Application:
distribution
Width:
140 mm
Sustainable Offer Status:
Green Premium product
Eu Rohs Directive:
Compliant with Exemptions
Tightening Torque:
50-50 N.m 70-240 mm² (AWG 2/0...500 kcmil)
Trip Unit Name:
MicroLogic 3.3
Warranty:
18 months
Breaking Capacity Code:
D
[Ics] Rated Service Breaking Capacity:
25 kA 220/240 V AC 50/60 Hz IEC 60947-2 || 18 kA 380/440/415 V AC 50/60 Hz IEC 60947-2 || 14 kA 500/525 V AC 50/60 Hz IEC 60947-2 || 20 kA 250 V DC IEC 60947-2 || 20 kA 500 V DC IEC 60947-2
Standards:
UL || CSA || NEMA || NOM-003-SCFI-2000 || IEC 60947-2
Phase Connection:
ABC
Depth:
110 mm
Ip Degree Of Protection:
front cover IP40
Operating Altitude:
< 6561.68 ft (2000 m) without derating || 5000 m with derating
Mercury Free:
Yes
Range:
PowerPact
Net Weight:
6.2 kg
[Uimp] Rated Impulse Withstand Voltage:
8 kV IEC 60947-2
Circuit Breaker Application:
HACR rated
Mounting Height:
6 in
Local Signalling:
ready 1 LED green) || alarm 1 LED 90 % Ir orange) || alarm LED 105 % Ir red) || switched off (OFF) 1 trip indicator green)
Height:
340 mm
Electrical Connection:
I-Line connection, line || lugs, load
Ambient Air Temperature For Operation:
-2-70 °C
Awg Gauge:
2 x AWG 2/0...500 kcmil aluminium/copper
Utilisation Category:
category A
Wire Stripping Length:
31 mm || 61 mm
[Ue] Rated Operational Voltage:
600 V AC 50/60 Hz IEC 60947-3
Line Rated Current:
400-400 A
Pvc Free:
Yes
Trip Unit Technology:
electronic, standard, MicroLogic 3.3, LI
Number Of Slots:
2 auxiliary switch OF plug-in) || 1 alarm switch SD plug-in) || 1 overcurrent trip switch SDE plug-in) || 1 voltage release MN or MX plug-in)
Suitability For Isolation:
yes IEC 60947-2
Product Certifications:
UL || CSA || NOM
Product Or Component Type:
circuit breaker
Network Frequency:
50/60 Hz
California Proposition 65:
WARNING: This product can expose you to chemicals including: DINP, which is known to the State of California to cause cancer, and DIDP, which is known to the State of California to cause birth defects or other reproductive harm. For more information
Terminal Identifier:
AL600LS52K3
Control Type:
toggle
Environmental Disclosure:
ENVPEP2206029EN
Ambient Air Temperature For Storage:
-50-85 °C
Protection Technology:
current limiter
[Ui] Rated Insulation Voltage:
750 V IEC 60947-2
Poles Description:
3P
Continuous Current Rating:
1
Brochure:
View
Catalog:
View
Datasheet:
View
  • Schneider Electric LDA36400CU31X Molded Case Circuit Breaker 600V 400A
  • Schneider Electric LDA36400CU31X Molded Case Circuit Breaker 600V 400A
$5,943.00

Description

PowerPacT L-Frame circuit breakers are designed to protect electrical systems from damage caused by overloads and short circuits. PowerPacT L-Frame circuit breakers are available with electronic trip units. All PowerPacT L-Frame circuit breakers are equipped with dual-break rotating contacts that reduce the amount of peak current during a short circuit fault. All PowerPacT circuit breakers have an integral push-to-trip button in the cover to manually trip the circuit breaker. PowerPacT L circuit breakers are available in 3 and 4-pole unit mount, I-Line, and drawout constructions. This PowerPacT L, 400A, 3 pole, circuit breaker has an interrupting rating of 14kA at 600VAC. This circuit breaker provides MicroLogic Standard with a 3.3 trip unit and an LI function. This unit has I-Line terminations on the line side and mechanical lugs on the load side. This circuit breaker has a continuous current rating of 100% with an ABC phase connection. PowerPacT L circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked.
View AllClose