Schneider Electric LGL36400CU31X Molded Case Circuit Breaker 600V 400A

(No reviews yet) Write a Review
SKU:
LGL36400CU31X
UPC:
785901631828
Condition:
New
Breaking Capacity:
65 kA 240 V AC 50/60 Hz UL 489 || 35 kA 480 V AC 50/60 Hz UL 489 || 18 kA 600 V AC 50/60 Hz UL 489 || 20 kA 250 V DC UL 489 || 20 kA 500 V DC UL 489
[Ics] Rated Service Breaking Capacity:
65 kA 220/240 V AC 50/60 Hz IEC 60947-2 || 35 kA 380/440/415 V AC 50/60 Hz IEC 60947-2 || 18 kA 500/525 V AC 50/60 Hz IEC 60947-2 || 20 kA 250 V DC IEC 60947-2 || 20 kA 500 V DC IEC 60947-2
Warranty:
18 months
Mounting Support:
lug
Product Or Component Type:
circuit breaker
Depth:
110 mm
California Proposition 65:
WARNING: This product can expose you to chemicals including: DINP, which is known to the State of California to cause cancer, and DIDP, which is known to the State of California to cause birth defects or other reproductive harm. For more information
Local Signalling:
ready 1 LED green) || alarm 1 LED 90 % Ir orange) || alarm LED 105 % Ir red) || switched off (OFF) 1 trip indicator green)
Mercury Free:
Yes
Breaking Capacity Code:
G
Pollution Degree:
3 IEC 60947-1
Terminal Identifier:
AL600LS52K3
Tightening Torque:
50-50 N.m 70-240 mm² (AWG 2/0...500 kcmil)
Trip Unit Name:
MicroLogic 3.3
Eu Rohs Directive:
Compliant with Exemptions
Poles Description:
3P
Range:
PowerPact
Electrical Connection:
lugs, line || lugs, load
Network Frequency:
50/60 Hz
Line Rated Current:
400-400 A
Ip Degree Of Protection:
front cover IP40
Communication Interface:
Modbus || Ethernet
[Ue] Rated Operational Voltage:
600 V AC 50/60 Hz IEC 60947-3
Awg Gauge:
2 x AWG 2/0...500 kcmil aluminium/copper
Trip Unit Technology:
electronic, standard, MicroLogic 3.3, LI
[Uimp] Rated Impulse Withstand Voltage:
8 kV IEC 60947-2
Continuous Current Rating:
1
Height:
340 mm
Utilisation Category:
category A
Net Weight:
6.2 kg
Protection Technology:
current limiter
Standards:
UL || CSA || NEMA || NOM-003-SCFI-2000 || IEC 60947-2
Number Of Slots:
2 auxiliary switch OF plug-in) || 1 alarm switch SD plug-in) || 1 overcurrent trip switch SDE plug-in) || 1 voltage release MN or MX plug-in)
Device Short Name:
L-Frame
Long Time Pick-Up Adjustment Range:
0.25...1 x In
Pvc Free:
Yes
Wire Stripping Length:
31 mm || 61 mm
Product Certifications:
UL || CSA || NOM
Color:
Black
Environmental Disclosure:
ENVPEP2206029EN
Sustainable Offer Status:
Green Premium product
Suitability For Isolation:
yes IEC 60947-2
Circuit Breaker Application:
HACR rated
Ambient Air Temperature For Operation:
-2-70 °C
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Control Type:
toggle
Ambient Air Temperature For Storage:
-50-85 °C
Rohs Exemption Information:
Yes
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Product Name:
PowerPact L
[Ui] Rated Insulation Voltage:
750 V IEC 60947-2
Width:
140 mm
Circularity Profile:
ENVEOLI2206029EN
Device Application:
distribution
Mounting Mode:
unit mount lug)
Operating Altitude:
< 6561.68 ft (2000 m) without derating || 5000 m with derating
Brochure:
View
Catalog:
View
Datasheet:
View
  • Schneider Electric LGL36400CU31X Molded Case Circuit Breaker 600V 400A
  • Schneider Electric LGL36400CU31X Molded Case Circuit Breaker 600V 400A
  • Schneider Electric LGL36400CU31X Molded Case Circuit Breaker 600V 400A
$5,945.00

Description

PowerPacT L-Frame circuit breakers are designed to protect electrical systems from damage caused by overloads and short circuits. PowerPacT L-Frame circuit breakers are available with electronic trip units. All PowerPacT L-Frame circuit breakers are equipped with dual-break rotating contacts that reduce the amount of peak current during a short circuit fault. All PowerPacT circuit breakers have an integral push-to-trip button in the cover to manually trip the circuit breaker. PowerPacT L circuit breakers are available in 3 and 4-pole unit mount, I-Line, and drawout constructions. This PowerPacT L, 400A, 3 pole, circuit breaker has an interrupting rating of 18kA at 600VAC. This circuit breaker provides MicroLogic Standard with a 3.3 trip unit and an LI function. This unit has lugs on both the line and load sides. This circuit breaker has a continuous current rating of 100%. This circuit breaker has a continuous current rating of 100%. PowerPacT L circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked. PowerPacT L circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked.
View AllClose