Schneider Electric LGP36600U31X Molded Case Circuit Breaker 600V 600A

(No reviews yet) Write a Review
SKU:
LGP36600U31X
UPC:
785901955092
Condition:
New
Standards:
UL || CSA || NEMA || NOM-003-SCFI-2000 || IEC 60947-2
Eu Rohs Directive:
Compliant with Exemptions
Device Application:
distribution
Ip Degree Of Protection:
front cover IP40
Product Certifications:
UL || CSA || NOM
Pollution Degree:
3 IEC 60947-1
Awg Gauge:
2 x AWG 2/0...500 kcmil aluminium/copper
Circuit Breaker Application:
HACR rated
Operating Altitude:
< 6561.68 ft (2000 m) without derating || 5000 m with derating
Ambient Air Temperature For Operation:
-2-70 °C
Mercury Free:
Yes
Range:
PowerPact
Tightening Torque:
50-50 N.m 70-240 mm² (AWG 2/0...500 kcmil)
Wire Stripping Length:
31 mm || 61 mm
Environmental Disclosure:
ENVPEP2206029EN
Electrical Connection:
terminal nut, line || lugs, load
Height:
340 mm
Rohs Exemption Information:
Yes
Local Signalling:
ready 1 LED green) || alarm 1 LED 90 % Ir orange) || alarm LED 105 % Ir red) || switched off (OFF) 1 trip indicator green)
Number Of Slots:
2 auxiliary switch OF plug-in) || 1 alarm switch SD plug-in) || 1 overcurrent trip switch SDE plug-in) || 1 voltage release MN or MX plug-in)
Breaking Capacity:
65 kA 240 V AC 50/60 Hz UL 489 || 35 kA 480 V AC 50/60 Hz UL 489 || 18 kA 600 V AC 50/60 Hz UL 489 || 20 kA 250 V DC UL 489 || 20 kA 500 V DC UL 489
Suitability For Isolation:
yes IEC 60947-2
Line Rated Current:
600-600 A
Utilisation Category:
category A
Circularity Profile:
ENVEOLI2206029EN
Communication Interface:
Modbus || Ethernet
Net Weight:
6.2 kg
Trip Unit Technology:
electronic, standard, MicroLogic 3.3, LI
Warranty:
18 months
Terminal Identifier:
AL600LS52K3
[Uimp] Rated Impulse Withstand Voltage:
8 kV IEC 60947-2
Trip Unit Name:
MicroLogic 3.3
Ambient Air Temperature For Storage:
-50-85 °C
Depth:
110 mm
Network Frequency:
50/60 Hz
Sustainable Offer Status:
Green Premium product
Long Time Pick-Up Adjustment Range:
0.25...1 x In
Continuous Current Rating:
0.8
Device Short Name:
L-Frame
[Ui] Rated Insulation Voltage:
750 V IEC 60947-2
Width:
140 mm
Control Type:
toggle
Product Name:
PowerPact L
Mounting Mode:
unit mount lug)
Mounting Support:
lug
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Color:
Black
Pvc Free:
Yes
Poles Description:
3P
[Ics] Rated Service Breaking Capacity:
65 kA 220/240 V AC 50/60 Hz IEC 60947-2 || 35 kA 380/440/415 V AC 50/60 Hz IEC 60947-2 || 18 kA 500/525 V AC 50/60 Hz IEC 60947-2 || 20 kA 250 V DC IEC 60947-2 || 20 kA 500 V DC IEC 60947-2
Product Or Component Type:
circuit breaker
[Ue] Rated Operational Voltage:
600 V AC 50/60 Hz IEC 60947-3
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Breaking Capacity Code:
G
California Proposition 65:
WARNING: This product can expose you to chemicals including: DINP, which is known to the State of California to cause cancer, and DIDP, which is known to the State of California to cause birth defects or other reproductive harm. For more information
Brochure:
View
Catalog:
View
Datasheet:
View
  • Schneider Electric LGP36600U31X Molded Case Circuit Breaker 600V 600A
  • Schneider Electric LGP36600U31X Molded Case Circuit Breaker 600V 600A
  • Schneider Electric LGP36600U31X Molded Case Circuit Breaker 600V 600A
$7,484.00

Description

PowerPacT L-Frame circuit breakers are designed to protect electrical systems from damage caused by overloads and short circuits. PowerPacT L-Frame circuit breakers are available with electronic trip units. All PowerPacT L-Frame circuit breakers are equipped with dual-break rotating contacts that reduce the amount of peak current during a short circuit fault. All PowerPacT circuit breakers have an integral push-to-trip button in the cover to manually trip the circuit breaker. PowerPacT L circuit breakers are available in 3 and 4-pole unit mount, I-Line, and drawout constructions. This PowerPacT L, 600A, 3 pole, circuit breaker has an interrupting rating of 18kA at 600VAC. This circuit breaker provides MicroLogic Standard with a 3.3 trip unit and an LI function. This unit has terminal nuts on the line side and lugs on the load side. This circuit breaker has a continuous current rating of 80%. This circuit breaker has a continuous current rating of 80%. PowerPacT L circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked. PowerPacT L circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked.
View AllClose