Schneider Electric LJA36400U31X Molded Case Circuit Breaker 600V 400A

(No reviews yet) Write a Review
SKU:
LJA36400U31X
UPC:
785901648550
Condition:
New
Electrical Connection:
I-Line connection, line || lugs, load
Awg Gauge:
AWG 3/0...500 kcmil aluminium/copper
Mercury Free:
Yes
Device Short Name:
L-Frame
Device Application:
distribution
[Ics] Rated Service Breaking Capacity:
65 kA 220/240 V AC 50/60 Hz IEC 60947-2 || 35 kA 380/440/415 V AC 50/60 Hz IEC 60947-2 || 18 kA 500/525 V AC 50/60 Hz IEC 60947-2 || 20 kA 250 V DC IEC 60947-2 || 20 kA 500 V DC IEC 60947-2
Product Certifications:
UL || CSA || NOM
Poles Description:
3P
Local Signalling:
ready 1 LED green) || alarm 1 LED 90 % Ir orange) || alarm LED 105 % Ir red) || switched off (OFF) 1 trip indicator green)
Ip Degree Of Protection:
front cover IP40
Range:
PowerPact
Mounting Height:
6 in
Terminal Identifier:
AL600LF52K3
Color:
Black
Breaking Capacity Code:
J
Pollution Degree:
3 IEC 60947-1
Protection Technology:
current limiter
Network Frequency:
50/60 Hz
Tightening Torque:
50-50 N.m 95-240 mm² (AWG 3/0...500 kcmil)
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Long Time Pick-Up Adjustment Range:
0.25...1 x In
Mounting Support:
bracket
Trip Unit Name:
MicroLogic 3.3
Ambient Air Temperature For Storage:
-50-85 °C
Warranty:
18 months
Communication Interface:
Modbus || Ethernet
Number Of Slots:
2 auxiliary switch OF plug-in) || 1 alarm switch SD plug-in) || 1 overcurrent trip switch SDE plug-in) || 1 voltage release MN or MX plug-in)
Phase Connection:
ABC
Operating Altitude:
< 6561.68 ft (2000 m) without derating || 5000 m with derating
Width:
140 mm
[Ui] Rated Insulation Voltage:
750 V IEC 60947-2
Product Or Component Type:
circuit breaker
Wire Stripping Length:
31 mm
Mounting Mode:
I-Line bracket)
[Ue] Rated Operational Voltage:
600 V AC 50/60 Hz IEC 60947-3
Depth:
110 mm
Suitability For Isolation:
yes IEC 60947-2
Eu Rohs Directive:
Compliant with Exemptions
Continuous Current Rating:
0.8
Line Rated Current:
400-400 A
Control Type:
toggle
Environmental Disclosure:
ENVPEP2206029EN
Ambient Air Temperature For Operation:
-2-70 °C
Trip Unit Technology:
electronic, standard, MicroLogic 3.3, LI
Product Name:
PowerPact L
Net Weight:
6.2 kg
Utilisation Category:
category A
Pvc Free:
Yes
Circularity Profile:
ENVEOLI2206029EN
California Proposition 65:
WARNING: This product can expose you to chemicals including: DINP, which is known to the State of California to cause cancer, and DIDP, which is known to the State of California to cause birth defects or other reproductive harm. For more information
Sustainable Offer Status:
Green Premium product
Height:
340 mm
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Breaking Capacity:
100 kA 240 V AC 50/60 Hz UL 489 || 65 kA 480 V AC 50/60 Hz UL 489 || 25 kA 600 V AC 50/60 Hz UL 489 || 20 kA 250 V DC UL 489
[Uimp] Rated Impulse Withstand Voltage:
8 kV IEC 60947-2
Standards:
UL || CSA || NEMA || NOM-003-SCFI-2000 || IEC 60947-2
Rohs Exemption Information:
Yes
Circuit Breaker Application:
HACR rated
  • Schneider Electric LJA36400U31X Molded Case Circuit Breaker 600V 400A
  • Schneider Electric LJA36400U31X Molded Case Circuit Breaker 600V 400A
  • Schneider Electric LJA36400U31X Molded Case Circuit Breaker 600V 400A
$8,773.00

Description

PowerPacT L-Frame circuit breakers are designed to protect electrical systems from damage caused by overloads and short circuits. PowerPacT L-Frame circuit breakers are available with electronic trip units. All PowerPacT L-Frame circuit breakers are equipped with dual-break rotating contacts that reduce the amount of peak current during a short circuit fault. All PowerPacT circuit breakers have an integral push-to-trip button in the cover to manually trip the circuit breaker. PowerPacT L circuit breakers are available in 3 and 4-pole unit mount, I-Line, and drawout constructions. This PowerPacT L, 400A, 3 pole, circuit breaker has an interrupting rating of 25kA at 600VAC. This circuit breaker provides MicroLogic Standard with a 3.3 trip unit and an LI function. This unit has I-Line terminations on the line side and mechanical lugs on the load side. This circuit breaker has a continuous current rating of 80% with an ABC phase connection. This circuit breaker has a continuous current rating of 80% with an ABC phase connection. PowerPacT L circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked. PowerPacT L circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked.
View AllClose