Schneider Electric LJA36600U43X Circuit Breaker Frame Only 600V 600A

(No reviews yet) Write a Review
SKU:
LJA36600U43X
UPC:
785901486916
Condition:
New
Number Of Slots:
2 auxiliary switch OF plug-in) || 1 alarm switch SD plug-in) || 1 overcurrent trip switch SDE plug-in) || 1 voltage release MN or MX plug-in)
Height:
340 mm
Pvc Free:
Yes
Tightening Torque:
50-50 N.m 70-240 mm² (2 x AWG 2/0...500 kcmil)
Mounting Mode:
I-Line bracket)
Environmental Disclosure:
ENVPEP2206029EN
Net Weight:
6.2 kg
Width:
140 mm
[Ue] Rated Operational Voltage:
600 V AC 50/60 Hz IEC 60947-3
Operating Altitude:
< 6561.68 ft (2000 m) without derating || 5000 m with derating
Eu Rohs Directive:
Compliant with Exemptions
Awg Gauge:
2 x AWG 2/0...500 kcmil aluminium/copper
Range:
PowerPact
[Ui] Rated Insulation Voltage:
750 V IEC 60947-2
Warranty:
18 months
Communication Interface:
Modbus || Ethernet
Network Frequency:
50/60 Hz
Circuit Breaker Application:
HACR rated
Poles Description:
3P
Line Rated Current:
600-600 A
Product Or Component Type:
circuit breaker
Rohs Exemption Information:
Yes
Product Name:
PowerPact L
Phase Connection:
ABC
Device Short Name:
L-Frame
Device Application:
distribution
Ip Degree Of Protection:
front cover IP40
Local Signalling:
ready 1 LED green) || alarm 1 LED 90 % Ir orange) || alarm LED 105 % Ir red) || switched off (OFF) 1 trip indicator green)
Product Certifications:
UL || CSA || NOM
Utilisation Category:
category A
Depth:
110 mm
Mercury Free:
Yes
Terminal Identifier:
AL600LF52K3
Sustainable Offer Status:
Green Premium product
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
[Ics] Rated Service Breaking Capacity:
65 kA 220/240 V AC 50/60 Hz IEC 60947-2 || 35 kA 380/440/415 V AC 50/60 Hz IEC 60947-2 || 18 kA 500/525 V AC 50/60 Hz IEC 60947-2 || 20 kA 250 V DC IEC 60947-2 || 20 kA 500 V DC IEC 60947-2
Breaking Capacity:
100 kA 240 V AC 50/60 Hz UL 489 || 65 kA 480 V AC 50/60 Hz UL 489 || 25 kA 600 V AC 50/60 Hz UL 489 || 20 kA 250 V DC UL 489
Circularity Profile:
ENVEOLI2206029EN
Mounting Support:
bracket
Trip Unit Name:
MicroLogic 5.3 A
Breaking Capacity Code:
J
Control Type:
toggle
Continuous Current Rating:
0.8
Ambient Air Temperature For Storage:
-50-85 °C
Long Time Pick-Up Adjustment Range:
0.25...1 x In
[Uimp] Rated Impulse Withstand Voltage:
8 kV IEC 60947-2
Mounting Height:
6 in
Suitability For Isolation:
yes IEC 60947-2
Color:
Black
Standards:
UL || CSA || NEMA || NOM-003-SCFI-2000 || IEC 60947-2
Wire Stripping Length:
31 mm
Ambient Air Temperature For Operation:
-2-70 °C
Pollution Degree:
3 IEC 60947-1
Electrical Connection:
I-Line connection, line || lugs, load
California Proposition 65:
WARNING: This product can expose you to chemicals including: DINP, which is known to the State of California to cause cancer, and DIDP, which is known to the State of California to cause birth defects or other reproductive harm. For more information
Trip Unit Technology:
electronic, ammeter, MicroLogic 5.3 A, LSI
Brochure:
View
Catalog:
View
Datasheet:
View
$12,336.00

Description

PowerPacT L-Frame circuit breakers are designed to protect electrical systems from damage caused by overloads and short circuits. PowerPacT L-Frame circuit breakers are available with electronic trip units. All PowerPacT L-Frame circuit breakers are equipped with dual-break rotating contacts that reduce the amount of peak current during a short circuit fault. All PowerPacT circuit breakers have an integral push-to-trip button in the cover to manually trip the circuit breaker. PowerPacT L circuit breakers are available in 3 and 4-pole unit mount, I-Line, and drawout constructions. This PowerPacT L, 600A, 3 pole, circuit breaker has an interrupting rating of 25kA at 600VAC. This circuit breaker provides MicroLogic Ammeter with a 5.3A trip unit and an LSI function. This unit has I-Line terminations on the line side and mechanical lugs on the load side. This circuit breaker has a continuous current rating of 80% with an ABC phase connection. This circuit breaker has a continuous current rating of 80% with an ABC phase connection. PowerPacT L circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked. PowerPacT L circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked.
View AllClose