Schneider Electric LJP36600U31X Molded Case Circuit Breaker 600V 400A

(No reviews yet) Write a Review
SKU:
LJP36600U31X
UPC:
7.85902E+11
Condition:
New
Range:
PowerPact
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Environmental Disclosure:
ENVPEP2206029EN
Product Certifications:
UL || CSA || NOM
Breaking Capacity Code:
J
Mounting Support:
lug
Terminal Identifier:
AL600LS52K3
Protection Technology:
current limiter
Number Of Slots:
2 auxiliary switch OF plug-in) || 1 alarm switch SD plug-in) || 1 overcurrent trip switch SDE plug-in) || 1 voltage release MN or MX plug-in)
Ambient Air Temperature For Operation:
-2-70 °C
Mounting Mode:
unit mount lug)
California Proposition 65:
WARNING: This product can expose you to chemicals including: DINP, which is known to the State of California to cause cancer, and DIDP, which is known to the State of California to cause birth defects or other reproductive harm. For more information
Eu Rohs Directive:
Compliant with Exemptions
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Line Rated Current:
600-600 A
Continuous Current Rating:
0.8
Device Short Name:
L-Frame
Awg Gauge:
2 x AWG 2/0...500 kcmil aluminium/copper
Local Signalling:
ready 1 LED green) || alarm 1 LED 90 % Ir orange) || alarm LED 105 % Ir red) || switched off (OFF) 1 trip indicator green)
Tightening Torque:
50-50 N.m 70-240 mm² (AWG 2/0...500 kcmil)
Breaking Capacity:
100 kA 240 V AC 50/60 Hz UL 489 || 65 kA 480 V AC 50/60 Hz UL 489 || 25 kA 600 V AC 50/60 Hz UL 489 || 20 kA 250 V DC UL 489
Trip Unit Name:
MicroLogic 3.3
Color:
Black
Long Time Pick-Up Adjustment Range:
0.25...1 x In
Operating Altitude:
< 6561.68 ft (2000 m) without derating || 5000 m with derating
Height:
340 mm
Suitability For Isolation:
yes IEC 60947-2
Circuit Breaker Application:
HACR rated
[Ui] Rated Insulation Voltage:
750 V IEC 60947-2
Sustainable Offer Status:
Green Premium product
[Uimp] Rated Impulse Withstand Voltage:
8 kV IEC 60947-2
Pollution Degree:
3 IEC 60947-1
Circularity Profile:
ENVEOLI2206029EN
Standards:
UL || CSA || NEMA || NOM-003-SCFI-2000 || IEC 60947-2
Mercury Free:
Yes
Product Or Component Type:
circuit breaker
Net Weight:
6.2 kg
Electrical Connection:
terminal nut, line || lugs, load
Depth:
110 mm
[Ics] Rated Service Breaking Capacity:
65 kA 220/240 V AC 50/60 Hz IEC 60947-2 || 35 kA 380/440/415 V AC 50/60 Hz IEC 60947-2 || 18 kA 500/525 V AC 50/60 Hz IEC 60947-2 || 20 kA 250 V DC IEC 60947-2 || 20 kA 500 V DC IEC 60947-2
Ambient Air Temperature For Storage:
-50-85 °C
Control Type:
toggle
Product Name:
PowerPact L
Pvc Free:
Yes
Width:
140 mm
Trip Unit Technology:
electronic, standard, MicroLogic 3.3, LI
Ip Degree Of Protection:
front cover IP40
Warranty:
18 months
Poles Description:
3P
Rohs Exemption Information:
Yes
Device Application:
distribution
Utilisation Category:
category A
[Ue] Rated Operational Voltage:
600 V AC 50/60 Hz IEC 60947-3
Network Frequency:
50/60 Hz
Communication Interface:
Modbus || Ethernet
Wire Stripping Length:
31 mm || 61 mm
Brochure:
View
Catalog:
View
Datasheet:
View
  • Schneider Electric LJP36600U31X Molded Case Circuit Breaker 600V 400A
  • Schneider Electric LJP36600U31X Molded Case Circuit Breaker 600V 400A
$10,541.00

Description

PowerPacT L-Frame circuit breakers are designed to protect electrical systems from damage caused by overloads and short circuits. PowerPacT L-Frame circuit breakers are available with electronic trip units. All PowerPacT L-Frame circuit breakers are equipped with dual-break rotating contacts that reduce the amount of peak current during a short circuit fault. All PowerPacT circuit breakers have an integral push-to-trip button in the cover to manually trip the circuit breaker. PowerPacT L circuit breakers are available in 3 and 4-pole unit mount, I-Line, and drawout constructions. This PowerPacT L, 600A, 3 pole, circuit breaker has an interrupting rating of 25kA at 600VAC. This circuit breaker provides MicroLogic Standard with a 3.3 trip unit and an LI function. This unit has terminal nuts on the line side and lugs on the load side. This circuit breaker has a continuous current rating of 80%. PowerPacT L circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked.
View AllClose