Schneider Electric LK4JU3N Disconnect Switch No Fuse 600V 100A 3P

(No reviews yet) Write a Review
SKU:
LK4JU3N
UPC:
3606480510441
Condition:
New
Warranty:
18 months
Mechanical Durability:
8000 cycles
Reach Free Of Svhc:
Yes
Standards:
IEC 60947-3 || UL98 || CSA C22.2 No 4
California Proposition 65:
WARNING: This product can expose you to chemicals including: Styrene, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov
Connections - Terminals:
lugs-ring terminals 1 4-4 mm²
Electrical Durability:
6000 cycles
Control Type:
rotary handle
[Ie] Rated Operational Current:
100 A400 V AC AC-22A IEC || 100 A400 V AC AC-23A IEC || 100 A690 V AC AC-22A IEC || 100 A690 V AC AC-23A IEC || 100 A CSA || 100 A UL
Eu Rohs Directive:
Compliant
Product Certifications:
CE || UL || CSA
Mercury Free:
Yes
[Ue] Rated Operational Voltage:
600 V AC 50/60 Hz
China Rohs Regulation:
X
Network Frequency:
50/60 Hz
Toxic Heavy Metal Free:
Yes
[Uimp] Rated Impulse Withstand Voltage:
8 kV IEC
Rated Power In W:
51 kW 400 V || 63 kW 500 V || 90 kW 690 V
Type Of Operating Handle:
external frontal || external right side
[Ui] Rated Insulation Voltage:
750 V
Rated Power In Hp:
30 hp 240 V 53 A AC || 75 hp 480 V 64 A AC || 100 hp 600 V 51 A AC || 10 hp 125 V 77 A DC || 15 hp 250 V 54 A DC
Range:
TeSys
[Icw] Rated Short-Time Withstand Current:
17.6 kA
Depth:
95 mm
Poles Description:
3P
Product Name:
TeSys LK
Product Or Component Type:
Disconnect Switch
Height:
160 mm
Width:
180 mm
Disconnector Device Type:
non-fusible disconnect switch
Mounting Support:
plate
Network Type:
AC || DC
Reach Regulation:
Free of Substances of Very High Concern above the threshold
Suitability For Isolation:
yes
Rohs Exemption Information:
Yes
  • Schneider Electric LK4JU3N Disconnect Switch No Fuse 600V 100A 3P
  • Schneider Electric LK4JU3N Disconnect Switch No Fuse 600V 100A 3P
  • Schneider Electric LK4JU3N Disconnect Switch No Fuse 600V 100A 3P
$458.00

Description

TeSys LK4 non fusible disconnect switches are compact or standard sized switches that break and make power circuits, on and off loads, and provide safety isolation. This 3 pole non fusible disconnect switch has a 100 ampere rating. It can be used in applications up to 600 VAC or VDC. This nonfusible disconnect switch has a 30 HP rating at 240 VAC, a 75 HP rating at 480 VAC, a 100 HP rating at 600 VAC, a 10 HP rating at 125 VDC and a 15 HP rating at 240 VDC. This disconnect switch is operated with a rotary handle. This 100A disconnect switch has a 200kA short circuit current rating (SCCR) when used with Type J fuses. Each terminal has a lug that will accept one 6 AWG to 300 kcmil copper or aluminum wire. The disconnect switch is 6.30 inches tall, 7.09 inches wide and 3.72 inches deep. TeSys LK his motor circuit protector is UL Listed and CSA certified.
View AllClose