Schneider Electric LLL36600U33X Molded Case Circuit Breaker 600V 600A

(No reviews yet) Write a Review
SKU:
LLL36600U33X
UPC:
785901204985
Condition:
New
Long Time Pick-Up Adjustment Range:
0.25...1 x In
Width:
140 mm
Ambient Air Temperature For Storage:
-50-85 °C
Device Application:
distribution
Sustainable Offer Status:
Green Premium product
Local Signalling:
ready 1 LED green) || alarm 1 LED 90 % Ir orange) || alarm LED 105 % Ir red) || switched off (OFF) 1 trip indicator green)
Depth:
110 mm
Electrical Connection:
lugs, line || lugs, load
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Standards:
UL || CSA || NEMA || NOM-003-SCFI-2000 || IEC 60947-2
Communication Interface:
Modbus || Ethernet
Product Name:
PowerPact L
Control Type:
toggle
[Ue] Rated Operational Voltage:
600 V AC 50/60 Hz IEC 60947-3
Number Of Slots:
2 auxiliary switch OF plug-in) || 1 alarm switch SD plug-in) || 1 overcurrent trip switch SDE plug-in) || 1 voltage release MN or MX plug-in)
Circuit Breaker Application:
HACR rated
Protection Technology:
current limiter
Environmental Disclosure:
ENVPEP2206029EN
Pvc Free:
Yes
[Ics] Rated Service Breaking Capacity:
125 kA 220/240 V AC 50/60 Hz IEC 60947-2 || 100 kA 380/440/415 V AC 50/60 Hz IEC 60947-2 || 50 kA 500/525 V AC 50/60 Hz IEC 60947-2 || 20 kA 250 V DC IEC 60947-2 || 20 kA 500 V DC IEC 60947-2
Device Short Name:
L-Frame
Range:
PowerPact
Mounting Mode:
unit mount lug)
Line Rated Current:
600-600 A
California Proposition 65:
WARNING: This product can expose you to chemicals including: DINP, which is known to the State of California to cause cancer, and DIDP, which is known to the State of California to cause birth defects or other reproductive harm. For more information
Continuous Current Rating:
0.8
Trip Unit Name:
MicroLogic 3.3 S
Ambient Air Temperature For Operation:
-2-70 °C
Ip Degree Of Protection:
front cover IP40
Product Certifications:
UL || CSA || NOM
Suitability For Isolation:
yes IEC 60947-2
Warranty:
18 months
Product Or Component Type:
circuit breaker
[Uimp] Rated Impulse Withstand Voltage:
8 kV IEC 60947-2
Height:
340 mm
Pollution Degree:
3 IEC 60947-1
Poles Description:
3P
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Wire Stripping Length:
31 mm || 61 mm
Net Weight:
6.2 kg
Mercury Free:
Yes
Rohs Exemption Information:
Yes
Circularity Profile:
ENVEOLI2206029EN
Eu Rohs Directive:
Compliant with Exemptions
Trip Unit Technology:
electronic, standard, MicroLogic 3.3 S, LSI
Network Frequency:
50/60 Hz
Breaking Capacity Code:
L
Terminal Identifier:
AL600LS52K3
[Ui] Rated Insulation Voltage:
750 V IEC 60947-2
Color:
Black
Utilisation Category:
category A
Awg Gauge:
2 x AWG 2/0...500 kcmil aluminium/copper
Mounting Support:
lug
Breaking Capacity:
125 kA 240 V AC 50/60 Hz UL 489 || 100 kA 480 V AC 50/60 Hz UL 489 || 50 kA 600 V AC 50/60 Hz UL 489 || 20 kA 250 V DC UL 489 || 50 kA 500 V DC UL 489
Tightening Torque:
50-50 N.m 70-240 mm² (2 x AWG 2/0...500 kcmil)
Operating Altitude:
< 6561.68 ft (2000 m) without derating || 5000 m with derating
Brochure:
View
Catalog:
View
Datasheet:
View
$12,430.00

Description

PowerPacT L-Frame circuit breakers are designed to protect electrical systems from damage caused by overloads and short circuits. PowerPacT L-Frame circuit breakers are available with electronic trip units. All PowerPacT L-Frame circuit breakers are equipped with dual-break rotating contacts that reduce the amount of peak current during a short circuit fault. All PowerPacT circuit breakers have an integral push-to-trip button in the cover to manually trip the circuit breaker. PowerPacT L circuit breakers are available in 3 and 4-pole unit mount, I-Line, and drawout constructions. This PowerPacT L, 600A, 3 pole, circuit breaker has an interrupting rating of 50kA at 600VAC. This circuit breaker provides MicroLogic Standard with a 3.3S trip unit and an LSI function. This unit has lugs on both the line and load sides. This circuit breaker has a continuous current rating of 80%. PowerPacT L circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked.
View AllClose