Schneider Electric LXM32AD18M2 Lxm32A Can Rj45 18A Rms Peak 1Ph 230V

(No reviews yet) Write a Review
SKU:
LXM32AD18M2
UPC:
3.60648E+12
Condition:
New
Braking Current:
50 mA
Depth:
237 mm
Response Time On Output:
250 µs DO)discrete
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Ambient Air Temperature For Operation:
0-50 °C UL
Number Of Addresses:
1-127 CANopen, CANmotion || 1-247 Modbus
Type Of Cooling:
integrated fan
Ambient Air Temperature For Storage:
-25-70 °C
Pvc Free:
Yes
Mercury Free:
Yes
Emc Filter:
integrated
Communication Interface:
CANmotion, Integrated || CANopen, Integrated || Modbus, Integrated
Nominal Power:
0.5 kW 115 V 8 kHz || 1 kW 230 V 8 kHz
Format Of The Drive:
book
Physical Interface:
2-wire RS485 multidrop Modbus
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Output Voltage:
<= power supply voltage
Ip Degree Of Protection:
IP20 EN/IEC 60529 || IP20 EN/IEC 61800-5-1
Discrete Input Voltage:
24 V DC capture || 24 V DC logic || 24 V DC safety
Operating Position:
vertical +/- 10 degree
Maximum Leakage Current:
30 mA
Type Of Cable:
single-strand IEC cable 50-50 °C) copper 90 °C XLPE/EPR
Method Of Access:
slave
Standards:
EN/IEC 61800-5-1 || EN/IEC 61800-3
Relative Humidity:
Class 3K3 (5 to 85 %) without condensation IEC 60721-3-3
Product Or Component Type:
motion servo drive
Pollution Degree:
2 EN/IEC 61800-5-1
Protection Type:
against reverse polarity inputs signal || against short-circuits outputs signal
Response Time:
<= 5 ms compliment of STO_A, compliment of STO_B
Sampling Duration:
DI 0.25 ms discrete
Transmission Rate:
1 Mbps 4-4 m CANopen, CANmotion || 125 kbps 500-500 m CANopen, CANmotion || 250 kbps 250-250 m CANopen, CANmotion || 50 kbps 1000-1000 m CANopen, CANmotion || 500 kbps 100-100 m CANopen, CANmotion || 9600, 19200, 38400 bps 40-40 m Modbus
[Us] Rated Supply Voltage:
100...120 V - 15...10 % || 200...240 V - 15...10 %
Discrete Input Type:
capture CAP || logic DI || safety compliment of STO_A, compliment of STO_B
Discrete Input Logic:
positive compliment of STO_A, compliment of STO_B)< 5 V > 15 V EN/IEC 61131-2 type 1 || positive DI)> 19 V < 9 V EN/IEC 61131-2 type 1 || positive or negative DI)< 5 V > 15 V EN/IEC 61131-2 type 1
Environmental Characteristic:
classes 3C1 IEC 60721-3-3
Device Short Name:
LXM32A
Discrete Output Logic:
positive or negative DO)EN/IEC 61131-2
Discrete Input Number:
1 capture || 2 safety || 4 logic
Supply Frequency:
50/60 Hz - 5...5 %
Status Led:
1 LED (Red) servo drive voltage || 1 LED error || 1 LED RUN
Product Compatibility:
servo motor BMH 70 mm, 1 || servo motor BMH 70 mm, 2 || servo motor BMH 100 mm, 1 || servo motor BSH 70 mm, 1 || servo motor BSH 70 mm, 2 || servo motor BMH 70 mm, 3 || servo motor BSH 55 mm, 3 || servo motor BSH 70 mm, 3 || servo motor BSH 100 mm, 1
Width:
48 mm
Overvoltage Category:
III
Height:
270 mm
Vibration Resistance:
1 gn 13-150 Hz)EN/IEC 60068-2-6 || 1.5 mm peak to peak 3-13 Hz)EN/IEC 60068-2-6
Tightening Torque:
CN8 0.5-0.5 N.m || CN1 0.7-0.7 N.m || CN10 0.7-0.7 N.m
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Output Current 3S Peak:
10 A 115 V 5 s || 18 A 230 V 5 s
Continuous Power:
800 W 115 V || 1600 W 230 V
Operating Altitude:
<= 3280.84 ft (1000 m) without derating || > 3280.84...9842.52 ft (> 1000...3000 m) with conditions
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Electrical Connection:
terminal 3 mm², AWG 12 CN8) || terminal 5 mm², AWG 10 CN1) || terminal 5 mm², AWG 10 CN10)
Marking:
CE
Signalling Function:
display of faults 7 segments
Rohs Exemption Information:
Yes
Supply Voltage Limits:
85-132 V || 170-264 V
Network Frequency:
47.5...63 Hz
Control Signal Type:
servo motor encoder feedback
Connector Type:
RJ45 (labelled CN4 or CN5) CANmotion || RJ45 (labelled CN4 or CN5) CANopen || RJ45 (labelled CN7) Modbus
Discrete Output Voltage:
<= 30 V DC
Safety Level:
SIL 3 EN/IEC 61508 || PL = e ISO 13849-1
Circularity Profile:
ENVEOLI110605EN
Communication Service:
1 receive SDO CANmotion || 1 transmit SDO CANmotion || 2 PDOs conforming to DSP 402 CANmotion || 2 SDOs receive CANopen || 2 SDOs send CANopen || 4 configurable mapping PDOs CANopen || CANopen device profile drives and motion control CANopen, CANmoti
Phase:
single phase
Net Weight:
1.8 kg
Sustainable Offer Status:
Green Premium product
Contact Bounce Time:
<= 1 ms compliment of STO_A, compliment of STO_B || 2 µs CAP || 0.25 µs...1.5 ms DI
Discrete Output Number:
2
Environmental Disclosure:
ENVPEP110705EN
Electromagnetic Compatibility:
conducted EMC, class A group 1 EN 55011 || conducted EMC, class A group 2 EN 55011 || conducted EMC, environment 2 category C3 EN/IEC 61800-3 || conducted EMC, category C2 EN/IEC 61800-3 || conducted EMC, environments 1 and 2 EN/IEC 61800-3 || electr
Product Certifications:
UL || TÜV || CSA
Safety Function:
STO (safe torque off), Integrated
Discrete Output Type:
logic DO)24 V DC
Shock Resistance:
15 gn 11 ms EN/IEC 60028-2-27
Switching Frequency:
8 kHz
Electrical Isolation:
between power and control
Line Current:
9.9 A 74 % 115 V, with external line choke 2 mH || 10.6 A 93 % 230 V, with external line choke 2 mH || 8.5 A 147 % 115 V, without line choke || 8.4 A 148 % 230 V, without line choke
China Rohs Regulation:
X
Continuous Output Current:
6 A 8 kHz
Range Of Product:
Lexium 32
Warranty:
18 months
Datasheet:
View
  • Schneider Electric LXM32AD18M2 Lxm32A Can Rj45 18A Rms Peak 1Ph 230V
  • Schneider Electric LXM32AD18M2 Lxm32A Can Rj45 18A Rms Peak 1Ph 230V
$1,549.95

Description

This product is part of the Lexium 32 range, an offer of motion servo drives for machines from 0.15kW to 7kW. The AC motion servo drive for one axis, features with an integrated EMC filter, compact drive with analogue inputs and pulse train. It provides 1 capture, 2 safety, 4 logic discrete inputs and 2 discrete outputs. Thanks to its compact design this servo drive enables to save on cabinet space and size, reduces the machine footprint and decreases costs. It is a motion servo drive with a rated supply voltage of 100V to 120V, 200V to 240V (single phase), a continuous output current of 6A at 8kHz and a continuous power of 1600W at 230V. It is furnished with terminal for electrical connection and three RJ45 connectors for CANmotion, CANopen, and Modbus, integrated communication interfaces. It is an IP20 rated product. Its dimensions are 48mm (Width) x 237mm (Depth) x 270mm (Height). It weighs 1.8kg. This product is certified by CE, CSA, RoHS, TUV and UL. It meets EN/IEC 61800-3 and EN/IEC 61800-5-1 standards. This product is compatible with servo motors BMH and BSH. Servo drive range with four servo drive models and two servo motor families plus an intelligent selection of options. It provides you with the drive and motor combination that has exactly the right power, performance and functionality.
View AllClose