Schneider Electric LXM32AU90M2 Lxm32A Can Rj45 9A Rms Peak 1Ph 230V

(No reviews yet) Write a Review
SKU:
LXM32AU90M2
UPC:
3606480076749
Condition:
New
Standards:
EN/IEC 61800-3 || EN/IEC 61800-5-1
Braking Current:
50 mA
Status Led:
1 LED (Red) servo drive voltage || 1 LED error || 1 LED RUN
Electrical Connection:
terminal 3 mm², AWG 12 CN8) || terminal 5 mm², AWG 10 CN1) || terminal 5 mm², AWG 10 CN10)
Transmission Rate:
1 Mbps 4-4 m CANopen, CANmotion || 125 kbps 500-500 m CANopen, CANmotion || 250 kbps 250-250 m CANopen, CANmotion || 50 kbps 1000-1000 m CANopen, CANmotion || 500 kbps 100-100 m CANopen, CANmotion || 9600, 19200, 38400 bps 40-40 m Modbus
Discrete Input Voltage:
24 V DC capture || 24 V DC logic || 24 V DC safety
Discrete Input Logic:
positive compliment of STO_A, compliment of STO_B)< 5 V > 15 V EN/IEC 61131-2 type 1 || positive DI)> 19 V < 9 V EN/IEC 61131-2 type 1 || positive or negative DI)< 5 V > 15 V EN/IEC 61131-2 type 1
Response Time:
<= 5 ms compliment of STO_A, compliment of STO_B
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Net Weight:
1.7 kg
Continuous Power:
400 W 115 V || 900 W 230 V
Ip Degree Of Protection:
IP20 EN/IEC 60529 || IP20 EN/IEC 61800-5-1
Environmental Characteristic:
classes 3C1 IEC 60721-3-3
Relative Humidity:
Class 3K3 (5 to 85 %) without condensation IEC 60721-3-3
Emc Filter:
integrated
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Range Of Product:
Lexium 32
Warranty:
18 months
Maximum Leakage Current:
30 mA
Discrete Output Number:
2
Product Certifications:
UL || CSA || TÜV
Discrete Output Voltage:
<= 30 V DC
Number Of Addresses:
1-127 CANopen, CANmotion || 1-247 Modbus
Signalling Function:
display of faults 7 segments
Line Current:
5.2 A 90 % 115 V, with external line choke 2 mH || 6.3 A 107 % 230 V, with external line choke 2 mH || 5.4 A 159 % 115 V, without line choke || 4.5 A 166 % 230 V, without line choke
Device Short Name:
LXM32A
Operating Altitude:
<= 3280.84 ft (1000 m) without derating || > 3280.84...9842.52 ft (> 1000...3000 m) with conditions
Connector Type:
RJ45 (labelled CN4 or CN5) CANmotion || RJ45 (labelled CN4 or CN5) CANopen || RJ45 (labelled CN7) Modbus
Product Or Component Type:
motion servo drive
Marking:
CE
Rohs Exemption Information:
Yes
Output Voltage:
<= power supply voltage
Ambient Air Temperature For Storage:
-25-70 °C
Switching Frequency:
8 kHz
Type Of Cable:
single-strand IEC cable 50-50 °C) copper 90 °C XLPE/EPR
Output Current 3S Peak:
6 A 115 V 5 s || 9 A 230 V 5 s
Phase:
single phase
Mercury Free:
Yes
Electrical Isolation:
between power and control
Tightening Torque:
CN8 0.5-0.5 N.m || CN1 0.7-0.7 N.m || CN10 0.7-0.7 N.m
Pollution Degree:
2 EN/IEC 61800-5-1
Physical Interface:
2-wire RS485 multidrop Modbus
Continuous Output Current:
3 A 8 kHz
Width:
48 mm
Format Of The Drive:
book
[Us] Rated Supply Voltage:
100...120 V - 15...10 % || 200...240 V - 15...10 %
Sampling Duration:
DI 0.25 ms discrete
Ambient Air Temperature For Operation:
0-50 °C UL
Operating Position:
vertical +/- 10 degree
Network Frequency:
47.5...63 Hz
Depth:
237 mm
Product Compatibility:
servo motor BMH 70 mm, 1 || servo motor BSH 70 mm, 1 || servo motor BSH 55 mm, 3 || servo motor BSH 55 mm, 1 || servo motor BSH 55 mm, 2
Overvoltage Category:
III
Method Of Access:
slave
Communication Interface:
CANmotion, Integrated || CANopen, Integrated || Modbus, Integrated
Shock Resistance:
15 gn 11 ms EN/IEC 60028-2-27
Communication Service:
1 receive SDO CANmotion || 1 transmit SDO CANmotion || 2 PDOs conforming to DSP 402 CANmotion || 2 SDOs receive CANopen || 2 SDOs send CANopen || 4 configurable mapping PDOs CANopen || CANopen device profile drives and motion control CANopen, CANmoti
Circularity Profile:
ENVEOLI110605EN
Discrete Input Number:
1 capture || 2 safety || 4 logic
Response Time On Output:
250 µs DO)discrete
Pvc Free:
Yes
Environmental Disclosure:
ENVPEP110705EN
Contact Bounce Time:
<= 1 ms compliment of STO_A, compliment of STO_B || 2 µs CAP || 0.25 µs...1.5 ms DI
Safety Function:
STO (safe torque off), Integrated
Protection Type:
against reverse polarity inputs signal || against short-circuits outputs signal
Type Of Cooling:
natural convection
Nominal Power:
0.3 kW 115 V 8 kHz || 0.5 kW 230 V 8 kHz
Safety Level:
SIL 3 EN/IEC 61508 || PL = e ISO 13849-1
Height:
270 mm
Electromagnetic Compatibility:
conducted EMC, class A group 1 EN 55011 || conducted EMC, class A group 2 EN 55011 || conducted EMC, environment 2 category C3 EN/IEC 61800-3 || conducted EMC, category C2 EN/IEC 61800-3 || conducted EMC, environments 1 and 2 EN/IEC 61800-3 || electr
Discrete Output Type:
logic DO)24 V DC
Vibration Resistance:
1 gn 13-150 Hz)EN/IEC 60068-2-6 || 1.5 mm peak to peak 3-13 Hz)EN/IEC 60068-2-6
Supply Voltage Limits:
85-132 V || 170-264 V
Discrete Input Type:
capture CAP || logic DI || safety compliment of STO_A, compliment of STO_B
Sustainable Offer Status:
Green Premium product
Discrete Output Logic:
positive or negative DO)EN/IEC 61131-2
China Rohs Regulation:
X
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Supply Frequency:
50/60 Hz - 5...5 %
Control Signal Type:
servo motor encoder feedback
Datasheet:
View
$1,249.85

Description

This product is part of the Lexium 32 range, an offer of motion servo drives for machines from 0.15kW to 7kW. The AC motion servo drive for one axis, features with an integrated EMC filter, compact drive with analogue inputs and pulse train. It provides 1 capture, 2 safety, 4 logic discrete inputs and 2 discrete outputs. Thanks to its compact design this servo drive enables to save on cabinet space and size, reduces the machine footprint and decreases costs. It is a motion servo drive with a rated supply voltage of 100V to 120V, 200V to 240V (single phase), a continuous output current of 3A at 8kHz and a continuous power of 900W at 230V. It is furnished with terminal for electrical connection and three RJ45 connectors for CANmotion, CANopen, and Modbus, integrated communication interfaces. It is an IP20 rated product. Its dimensions are 48mm (Width) x 237mm (Depth) x 270mm (Height). It weighs 1.7kg. This product is certified by CE, CSA, RoHS, TUV and UL. It meets EN/IEC 61800-3 and EN/IEC 61800-5-1 standards. This product is compatible with servo motors BMH and BSH. Servo drive range with four servo drive models and two servo motor families plus an intelligent selection of options. It provides you with the drive and motor combination that has exactly the right power, performance and functionality.
View AllClose