Schneider Electric

Schneider Electric LXM32SD72N4 Lxm32S Servo Drive Sercos 208#480V Tri 2

(No reviews yet) Write a Review
SKU:
LXM32SD72N4
UPC:
3606480694790
Condition:
New
Format Of The Drive:
book
Discrete Output Voltage:
<= 30 V DC
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Range Of Product:
Lexium 32
Safety Function:
STO (safe torque off), Integrated
Status Led:
1 LED (Red) servo drive voltage
Height:
270 mm
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Mercury Free:
Yes
Warranty:
18 months
Pollution Degree:
2 EN/IEC 61800-5-1
Number Of Addresses:
1-247 Modbus
Connector Type:
RJ45 (labelled CN7) Modbus
Transmission Rate:
9600, 19200, 38400 bps 40-40 m Modbus
Output Voltage:
<= power supply voltage
Ip Degree Of Protection:
IP20 EN/IEC 60529
Ambient Air Temperature For Operation:
0-50 °C UL
Nominal Power:
5 kW 208 V 8 kHz || 7 kW 400 V 8 kHz || 7 kW 480 V 8 kHz
[Us] Rated Supply Voltage:
200...240 V - 15...10 % || 380...480 V - 15...10 %
Device Short Name:
LXM32S
Phase:
three phase
Switching Frequency:
8 kHz
Depth:
237 mm
Discrete Input Logic:
positive compliment of STO_A, compliment of STO_B)< 5 V > 15 V EN/IEC 61131-2 type 1
Relative Humidity:
Class 3K3 (5 to 85 %) without condensation IEC 60721-3-3
Overvoltage Category:
III
Sustainable Offer Status:
Green Premium product
Electrical Isolation:
between power and control
Width:
108 mm
Discrete Input Number:
2 capture
Operating Position:
vertical +/- 10 degree
Signalling Function:
display of faults 7 segments
Vibration Resistance:
1 gn 13-150 Hz)EN/IEC 60068-2-6
Product Compatibility:
servo motor BMH 140 mm, 2
Supply Voltage Limits:
170-264 V || 323-528 V
Discrete Output Number:
3
Pvc Free:
Yes
Physical Interface:
2-wire RS485 multidrop Modbus
Emc Filter:
integrated
China Rohs Regulation:
X
Environmental Disclosure:
ENVPEP110705EN
Net Weight:
4.8 kg
Ambient Air Temperature For Storage:
-25-70 °C
Environmental Characteristic:
classes 3C1 IEC 60721-3-3
Braking Current:
50 mA
Product Or Component Type:
motion servo drive
Sampling Duration:
0.25 ms
Operating Altitude:
<= 3280.84 ft (1000 m) without derating
Maximum Leakage Current:
30 mA
Response Time On Output:
250 µs DO)discrete
Communication Interface:
Modbus, Integrated || SERCOS III, Integrated
Standards:
EN/IEC 61800-3
Network Frequency:
47.5...63 Hz
Marking:
CE
Electrical Connection:
terminal 3 mm², AWG 12 CN8)
Discrete Input Type:
capture CAP
Type Of Cooling:
integrated fan
Output Current 3S Peak:
72 A 208 V 5 s || 72 A 480 V 5 s
Continuous Power:
6500 W 208 V || 13000 W 400 V || 13000 W 480 V
Line Current:
21.1 A 34 % 208 V, with external line choke 1 mH || 22.5 A 45 % 400 V, with external line choke 1 mH || 19.5 A 55 % 480 V, with external line choke 1 mH || 21.9 A 106 % 208 V, without line choke || 17.3 A 126 % 400 V, without line choke || 14.6 A 129
Response Time:
<= 5 ms compliment of STO_A, compliment of STO_B
Rohs Exemption Information:
Yes
Tightening Torque:
CN8 0.5-0.5 N.m
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Circularity Profile:
ENVEOLI110605EN
Discrete Output Type:
logic DO)24 V DC
Safety Level:
SIL 3 EN/IEC 61508
Discrete Input Voltage:
24 V DC capture
Supply Frequency:
50/60 Hz - 5...5 %
Continuous Output Current:
24 A 8 kHz
Product Certifications:
CSA
Contact Bounce Time:
<= 1 ms compliment of STO_A, compliment of STO_B
Electromagnetic Compatibility:
conducted EMC EN 55011 class A group 1
Discrete Output Logic:
positive or negative DO)EN/IEC 61131-2
Shock Resistance:
15 gn 11 ms EN/IEC 60028-2-27
Type Of Cable:
single-strand IEC cable 50-50 °C) copper 90 °C XLPE/EPR
Datasheet:
View
$2,835.49

Description

This product is part of the Lexium 32 range, an offer of motion servo drives for machines from 0.15kW to 7kW. The AC motion servo drive for one axis, features with an integrated EMC filter, compact drive with analogue inputs and pulse train. It provides 2 capture discrete inputs and 3 discrete outputs. Thanks to its compact design this servo drive enables to save on cabinet space and size, reduces the machine footprint and decreases costs. It is a motion servo drive with a rated supply voltage of 200V to 240V, 380V to 480V (three phase), a continuous output current of 24A at 8kHz and a continuous power of 6500W at 230V. It is furnished with terminal for electrical connection and RJ45 connector for Modbus and SERCOS III integrated communication interfaces. It is an IP20 rated product. Its dimensions are 108mm (Width) x 237mm (Depth) x 270mm (Height). It weighs 4.8kg. This product is certified by CE and CSA. It meets EN/IEC 61800-3 standards. This product is compatible with servo motor BMH. Servo drive range with four servo drive models and two servo motor families plus an intelligent selection of options. It provides you with the drive and motor combination that has exactly the right power, performance and functionality.
View AllClose

Related Products

Related Products