Schneider Electric LXM32SU45M2 Lxm32S Servo Drive Sercos 200#240V Singl

(No reviews yet) Write a Review
SKU:
LXM32SU45M2
UPC:
3606480694806
Condition:
New
Environmental Disclosure:
ENVPEP110705EN
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Status Led:
1 LED (Red) servo drive voltage
Circularity Profile:
ENVEOLI110605EN
Physical Interface:
2-wire RS485 multidrop Modbus
Ambient Air Temperature For Operation:
0-50 °C UL
Product Compatibility:
servo motor BSH 55 mm, 1
Discrete Output Logic:
positive or negative DO)EN/IEC 61131-2
Supply Voltage Limits:
85-132 V || 170-264 V
Ip Degree Of Protection:
IP20 EN/IEC 60529
Switching Frequency:
8 kHz
Marking:
CE
Net Weight:
1.7 kg
Output Voltage:
<= power supply voltage
Number Of Addresses:
1-247 Modbus
Continuous Output Current:
1.5 A 8 kHz
Standards:
EN/IEC 61800-3
Tightening Torque:
CN8 0.5-0.5 N.m
Operating Position:
vertical +/- 10 degree
Electromagnetic Compatibility:
conducted EMC EN 55011 class A group 1
Continuous Power:
200 W 115 V || 500 W 230 V
Electrical Connection:
terminal 3 mm², AWG 12 CN8)
Connector Type:
RJ45 (labelled CN7) Modbus
Electrical Isolation:
between power and control
[Us] Rated Supply Voltage:
100...120 V - 15...10 % || 200...240 V - 15...10 %
Shock Resistance:
15 gn 11 ms EN/IEC 60028-2-27
Product Certifications:
CSA
Pvc Free:
Yes
Sustainable Offer Status:
Green Premium product
Braking Current:
50 mA
Pollution Degree:
2 EN/IEC 61800-5-1
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Nominal Power:
0.15 kW 115 V 8 kHz || 0.3 kW 230 V 8 kHz
Emc Filter:
integrated
Mercury Free:
Yes
Operating Altitude:
<= 3280.84 ft (1000 m) without derating
Ambient Air Temperature For Storage:
-25-70 °C
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Discrete Input Logic:
positive compliment of STO_A, compliment of STO_B)< 5 V > 15 V EN/IEC 61131-2 type 1
Contact Bounce Time:
<= 1 ms compliment of STO_A, compliment of STO_B
Output Current 3S Peak:
3 A 115 V 5 s || 4.5 A 230 V 5 s
Response Time On Output:
250 µs DO)discrete
Depth:
237 mm
Supply Frequency:
50/60 Hz - 5...5 %
Range Of Product:
Lexium 32
Discrete Input Voltage:
24 V DC capture
China Rohs Regulation:
X
Safety Function:
STO (safe torque off), Integrated
Discrete Input Number:
2 capture
Relative Humidity:
Class 3K3 (5 to 85 %) without condensation IEC 60721-3-3
Safety Level:
SIL 3 EN/IEC 61508
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Height:
270 mm
Phase:
single phase
Sampling Duration:
0.25 ms
Overvoltage Category:
III
Discrete Output Type:
logic DO)24 V DC
Format Of The Drive:
book
Network Frequency:
47.5...63 Hz
Signalling Function:
display of faults 7 segments
Type Of Cooling:
natural convection
Environmental Characteristic:
classes 3C1 IEC 60721-3-3
Discrete Input Type:
capture CAP
Discrete Output Number:
3
Type Of Cable:
single-strand IEC cable 50-50 °C) copper 90 °C XLPE/EPR
Discrete Output Voltage:
<= 30 V DC
Product Or Component Type:
motion servo drive
Transmission Rate:
9600, 19200, 38400 bps 40-40 m Modbus
Width:
68 mm
Device Short Name:
LXM32S
Line Current:
2.6 A 85 % 115 V, with external line choke 5 mH || 3.4 A 100 % 230 V, with external line choke 5 mH || 2.9 A 173 % 115 V, without line choke || 2.9 A 181 % 230 V, without line choke
Rohs Exemption Information:
Yes
Response Time:
<= 5 ms compliment of STO_A, compliment of STO_B
Warranty:
18 months
Vibration Resistance:
1 gn 13-150 Hz)EN/IEC 60068-2-6
Maximum Leakage Current:
30 mA
Communication Interface:
Modbus, Integrated || SERCOS III, Integrated
$1,396.90

Description

This product is part of the Lexium 32 range, an offer of servo drives from 0.15kW to 7kW. The motion servo drive features integrated EMC filter. It offers 2 capture discrete inputs and 3 discrete outputs. It is a motion servo drive with a rated supply voltage of 100V to 120V, 200V to 240V, a continuous output current of 1.5A at 8kHz and a continuous power of 150W at 115V. It is furnished with RJ45 connector (labelled CN7) for Modbus. It offers electrical isolation between power and control. It provides Modbus and SERCOS III communication interface. It is an IP20 rated product. Its dimensions are 68mm (width) x 237mm (depth) x 270mm (height). It weighs 1.7kg. This product is certified by CSA. It meets EN/IEC 61800-3 standards. This product is compatible with servo motor BSH (55mm, 1 motor stack). Lexium 32 is a servo drive range provides drive and motor combination that has exactly the right power, performance and functionality. The Lexium 32 range of servo drives includes four servo drive models with power ratings from 0.15kW to 11kW and the servo motor ranges BMH and BSH series.
View AllClose