Schneider Electric RE17LAMW On Delay Timer 24 240 Vac
Schneider Electric
$45.40
(No reviews yet)
Write a Review
Write a Review
Schneider Electric
Schneider Electric RE17LAMW On Delay Timer 24 240 Vac
This Harmony RE17L timing relay can be set between 0.1 seconds and 100 hours, has an output rating of 0.7A, is 17.5mm wide and can be supplied with 24V to 240V AC/DC. It also has 2 changeover contacts DPDT (double pole double throw). It has one of market slimmest form-factors, allowing for a flexible and easy installation on DIN rail, using the same space as any modular 1-pole DIN device. It also offers a sealable cover, simple and precise settings with rotary trimmers. 17.5mm width, same size as a 1-pole circuit breaker, to simplify your panel design. Single function timer for a simple integration in hard-wired logic schematics, ideal for refurbishment of old installations without using a PLC. 0 0 0 0 0 0 0 0 0 0 0 0 0
- Product Or Component Type:
- single function relay
- Marking:
- CE
- Shock Resistance:
- 15 gn 11 ms IEC 60068-2-27
- Relative Humidity:
- 93-93 % without condensation IEC 60068-2-30
- Standards:
- 2004/108/EC || IEC 61000-6-1 || 2006/95/EC || IEC 61000-6-3 || IEC 61000-6-2 || IEC 61812-1 || IEC 61000-6-4
- Mercury Free:
- Yes
- Insulation Resistance:
- 100 MOhm 500 V DC IEC 60664-1
- Operating Rate In Hz:
- 10 Hz
- Range Of Product:
- Harmony Timer Relays
- Rohs Exemption Information:
- Yes
- Component Name:
- RE17L
- Environmental Disclosure:
- ENVPEP121117EN
- Mounting Position:
- any position in relation to normal vertical mounting plane
- Ambient Air Temperature For Operation:
- -20-60 °C
- Supply Frequency:
- 50...60 Hz +/- 5 %
- Ip Degree Of Protection:
- IP20 IEC 60529 terminal block) || IP40 IEC 60529 housing) || IP50 IEC 60529 front panel)
- Sustainable Offer Status:
- Green Premium product
- Derating Factor:
- 5 mA/°C
- [Uimp] Rated Impulse Withstand Voltage:
- 5 kV 1.2/50 µs
- Housing Material:
- self-extinguishing
- Creepage Distance:
- 4 kV/3 IEC 60664-1
- Impulse Duration:
- 0.05 s typical
- Reset Time:
- 350 ms on de-energisation typical
- Maximum Output Current:
- 20 A
- Voltage Drift:
- +/- 0.2 %/V
- Time Delay Type:
- A
- Vibration Resistance:
- 20 m/s² 10-150 Hz)IEC 60068-2-6
- Circularity Profile:
- ENVEOLI121113EN
- Electromagnetic Compatibility:
- electrostatic discharge immunity test 6 kV in contact) level 3 IEC 61000-4-2 || electrostatic discharge immunity test 8 kV in air) level 3 IEC 61000-4-2 || susceptibility to electromagnetic fields 10 V/m 80 MHz to 1 GHz) level 3 IEC 61000-4-3 || elec
- Time Delay Type:
- power on-delay
- Time Delay Range:
- 1...10 s || 10...100 h || 6...60 s || 0.1...1 s || 1...10 min || 6...60 min || 1...10 h
- Mounting Support:
- 35 mm DIN rail conforming to IEC 60715
- China Rohs Regulation:
- X
- Tightening Torque:
- 0.6-1 N.m IEC 60947-1
- Compatibility Code:
- RE17
- Maximum Power Consumption In W:
- 1.5 W 240 V DC
- On-Load Factor:
- 1
- [Us] Rated Supply Voltage:
- 24...240 V AC/DC 50/60 Hz
- Net Weight:
- 0.068 kg
- Maximum Switching Voltage:
- 250 V AC/DC
- Power Consumption In Va:
- 0-3 VA 240 V AC
- Control Type:
- selector switch front panel
- Maximum Leakage Current:
- 5 mA
- Electrical Durability:
- 100000000 cycles
- California Proposition 65:
- WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Reach Regulation:
- Reference contains Substances of Very High Concern above the threshold
- Discrete Output Type:
- solid state
- Voltage Range:
- 0.85...1.1 Us
- Width:
- 17.5 mm
- Nominal Output Current:
- 0.7 A
- Dielectric Strength:
- 2.5 kV 1 mA/1 minute 50 Hz IEC 61812-1
- Maximum Delay Response:
- 100 ms
- Eu Rohs Directive:
- Pro-active compliance (Product out of EU RoHS legal scope)
- Temperature Drift:
- +/- 0.05 %/°C
- Safety Reliability Data:
- MTTFd = 353.8 years || B10d = 320000
- Connections - Terminals:
- screw terminals, 1 x 0.5...1 x 3.3 mm² AWG 20...AWG 12) solid without cable end || screw terminals, 2 x 0.5...2 x 2.5 mm² AWG 20...AWG 14) solid without cable end || screw terminals, 1 x 0.2...1 x 2.5 mm² AWG 24...AWG 14) flexible with cable end |
- Repeat Accuracy:
- +/- 0.5 % IEC 61812-1
- Product Certifications:
- GL || CSA || cULus
- Minimum Switching Current:
- 10 mA
- Setting Accuracy Of Time Delay:
- +/- 10 % of full scale 25 °C IEC 61812-1
- Ambient Air Temperature For Storage:
- -30-60 °C
- Maximum Voltage Drop:
- <4 V 3-wire || <8 V 2-wire
- Functionality:
- on-delay timing
- Immunity To Microbreaks:
- 20 ms
- Breaking Capacity:
- 0.5 A AC/DC UL || 0.7 A AC/DC 20 °C
- Catalog:
- View
- Datasheet:
- View
