
Schneider Electric RM17TE00 Ph Rot:Failure 208-480Vac Asymm Uv/Ov
Schneider Electric
$217.00
Zelio Control Monitoring and Control Relays (RM17, RM22, RM35) monitor and detect abnormal operating conditions concerning phase ,current, voltage, frequency, speed, or temperature. The relays inform users of abnormal conditions and allow them to initiate the necessary corrective actions before serious and costly breakdown can occur. Zelio phase control relays detect all possible faults occurring in the phases. Zelio voltage and current control relays ensure your equipment is powered with proper values. Zelio frequency control relay monitors frequency variation from your power generation line. The product monitors its own power supply, when the power supply is abnormal, the output relay de-energizes. Zelio pump control relay controls and protects your pump from dry running or overloading. Zelio speed control relay picks up the improper rhythm of your process. Zelio temperature control relay for lift application is a dedicated to elevator temperature monitoring (EN81). Zelio temperature control relays are dedicated to temperature regulation (heating, cooling or heating/cooling of processes). These Zelio relays are available in 17.5 mm, 22.5 mm or 35 mm wide housings and are DIN rail mounted. Applications for these Zelio relays include hoisting, construction cranes, harbor cranes, packaging, construction elevators, passenger elevators, escalators, textile, water and waste water. 0 0 0 0 0 0 0
- Mercury Free:
- Yes
- Standards:
- IEC 60255-1
- Contacts Type And Composition:
- 1 C/O
- Electrical Durability:
- 100000 cycles
- Maximum Measuring Cycle:
- 150 ms measurement cycle as true rms value
- Overvoltage Category:
- III IEC 60664-1
- Ambient Air Temperature For Operation:
- -20-50 °C
- Insulation Resistance:
- > 500 MOhm 500 V DC IEC 60255-5 || > 500 MOhm 500 V DC IEC 60664-1
- Measurement Range:
- 208...480 V voltage AC
- Reset Time:
- 1500 ms time delay
- [Ui] Rated Insulation Voltage:
- 400 V IEC 60664-1
- Width:
- 17.5 mm
- Control Circuit Frequency:
- 50...60 Hz +/- 10 %
- Threshold Adjustment Voltage:
- 2...20 % of Un selected || -2...-17 % in the range 220 V AC || +2...+10 % in the range 480 V AC || -2...-12 % in the range 208 V AC
- Measurement Voltage Limits:
- 183-528 V AC
- [Uc] Control Circuit Voltage:
- 208...480 V
- California Proposition 65:
- WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Dielectric Test Voltage:
- 2 kV AC 50 Hz, 1 min IEC 60255-5 || 2 kV AC 50 Hz, 1 min IEC 60664-1
- Voltage Range:
- 208...480 V phase to phase
- Ambient Air Temperature For Storage:
- -40-70 °C
- Minimum Switching Current:
- 10 mA 5 V DC
- Warranty:
- 18 months
- Safety Reliability Data:
- MTTFd = 502.2 years || B10d = 470000
- Utilisation Category:
- AC-12 IEC 60947-5-1 || AC-13 IEC 60947-5-1 || AC-14 IEC 60947-5-1 || AC-15 IEC 60947-5-1 || DC-12 IEC 60947-5-1 || DC-13 IEC 60947-5-1
- Response Time:
- < 200 ms (in the event of a fault)
- Supply Voltage Limits:
- 183-528 V AC
- Operating Position:
- any position without derating
- Sustainable Offer Status:
- Green Premium product
- Eu Rohs Directive:
- Pro-active compliance (Product out of EU RoHS legal scope)
- Marking:
- CE
- Vibration Resistance:
- 0.35 mm 5-57.6 Hz)IEC 60068-2-6 || 1 gn 57.6-150 Hz)IEC 60255-21-1
- Run-Up Delay At Power-Up:
- 650 ms
- Time Delay Type:
- adjustable 0.1...10 s, +/- 10 % of the full scale value
- Product Or Component Type:
- 3-phase control relay
- Range Of Product:
- Harmony Control Relays
- Adjustment Of Asymmetry Threshold:
- 5...15 % of Un selected
- Product Specific Application:
- for 3-phase supply
- Ip Degree Of Protection:
- IP20 IEC 60529 terminals) || IP30 IEC 60529 casing)
- Product Certifications:
- GOST || C-tick || CSA || UL || GL
- Maximum Switching Voltage:
- 250 V AC || 250 V DC
- Reach Regulation:
- Reference contains Substances of Very High Concern above the threshold
- Control Type:
- without test button
- Hysteresis:
- 2-2 %
- Phase Failure Sensitivity:
- 0.7 Un
- Operating Rate:
- <= 360 operations/hour full load
- Measurement Error:
- < 0.05 %/°C with temperature variation || < 1 % over the whole range with voltage variation
- Relay Monitored Parameters:
- undervoltage and overvoltage in window mode || asymmetry || phase sequence || phase failure detection
- Control Circuit Voltage Limits:
- 12 % + 10 % Un
- [Us] Rated Supply Voltage:
- self-powered
- Electromagnetic Compatibility:
- emission standard for industrial environments conforming to IEC 61000-6-4 || emission standard for residential, commercial and light-industrial environments conforming to IEC 61000-6-3 || immunity for industrial environments conforming to IEC 61000-6
- Repeat Accuracy:
- 0.5 % input and measurement circuit || 3 % time delay
- China Rohs Regulation:
- X
- Non-Dissipating Shock Wave:
- 4 kV IEC 60255-5 || 4 kV IEC 60664-1 || 4 kV IEC 61000-4-5
- Maximum Switching Current:
- 5 A AC || 5 A DC
- Power Consumption In Va:
- 0-22 VA 400 V AC 50 Hz
- Rohs Exemption Information:
- Yes
- Supply Frequency:
- 50/60 Hz +/- 10 %
- Connections - Terminals:
- screw terminals, 1 x 0.5...1 x 4 mm² AWG 20...AWG 11) solid without cable end || screw terminals, 2 x 0.5...2 x 2.5 mm² AWG 20...AWG 14) solid without cable end || screw terminals, 1 x 0.2...1 x 2.5 mm² AWG 24...AWG 12) flexible with cable end ||
- Relative Humidity:
- 95-95 % 55-55 °C IEC 60068-2-30
- Mechanical Durability:
- 30000000 cycles
- Shock Resistance:
- 15 gn 11 ms IEC 60255-21-1
- Net Weight:
- 0.13 kg
- Directives:
- 89/336/EEC - electromagnetic compatibility || 73/23/EEC - low voltage directive
- Relay Name:
- RM17TE
- Mounting Support:
- 35 mm symmetrical DIN rail conforming to IEC 60715
- Circularity Profile:
- ENVEOLI1504008EN
- Output Contacts:
- 1 C/O
- Housing Material:
- self-extinguishing plastic
- Local Signalling:
- for power ON LED (green) || for relay ON LED (yellow)
- Environmental Disclosure:
- ENVPEP1504008EN
- Pollution Degree:
- 3 IEC 60664-1
- Nominal Output Current:
- 0.208333333333333
- Relay Type:
- multifunction control relay
- Tightening Torque:
- 0.6-1 N.m IEC 60947-1
- Switching Capacity In Va:
- 1250 VA
- Catalog:
- View
- Datasheet:
- View