Schneider Electric RPM11B7 15A Power Relay 1C/O 24Vac Pack of 10

(No reviews yet) Write a Review
SKU:
RPM11B7
UPC:
3389119401647
Condition:
New
Reach Free Of Svhc:
Yes
Product Certifications:
EAC || CSA || UL
Utilisation Coefficient:
0.2
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
[Ithe] Conventional Enclosed Thermal Current:
15 A -40-55 °C
Device Short Name:
RPM
Operating Position:
any position
Device Presentation:
complete product
Contacts Material:
AgNi
Shape Of Pin:
flat
Warranty:
18 months
Operating Time:
20 ms at nominal voltage
Maximum Switching Capacity:
3750 VA || 420 W
Operating Rate:
<= 1200 cycles/hour under load || <= 18000 cycles/hour no-load
Mechanical Durability:
10000000 cycles
Dielectric Strength:
1500 V AC between contacts with micro disconnection || 2000 V AC between coil and contact with reinforced
Shock Resistance:
15 gnin operation || 30 gnnot operating
Reach Regulation:
Free of Substances of Very High Concern above the threshold
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Maximum Switching Voltage:
250 V IEC
Ambient Air Temperature For Storage:
-40-85 °C
Vibration Resistance:
3 gn +/- 1 mm 10-150 Hz)5 cycles in operation || 5 gn +/- 1 mm 10-150 Hz)5 cycles not operating
Ambient Air Temperature For Operation:
-40-55 °C
[Uimp] Rated Impulse Withstand Voltage:
4 kV 1.2/50 µs
Status Led:
without
Minimum Switching Capacity:
170 mW 10 mA, 17 V
Series Name:
Power
Environmental Disclosure:
ENVPEP1406038EN
Control Type:
lockable test button
Test Levels:
level A group mounting
Circularity Profile:
N/A
Ip Degree Of Protection:
IP40 conforming to IEC 60529
Average Coil Consumption In Va:
1.6 60 Hz
Rohs Exemption Information:
Yes
Contacts Type And Composition:
1 C/O
[Uc] Control Circuit Voltage:
24 V AC 50/60 Hz
Rated Operational Voltage Limits:
19.2...26.4 V AC
Reset Time:
20 ms at nominal voltage
Average Resistance:
177 Ohm at 20 °C +/- 15 %
[Ui] Rated Insulation Voltage:
250 V IEC || 300 V CSA || 300 V UL
Electrical Durability:
100000 cycles resistive
Load Current:
15 A 250 V AC || 15 A 28 V DC
[Ie] Rated Operational Current:
15 A 277 V AC) UL || 15 A 28 V DC) UL || 15 A 250 V AC) NO IEC || 15 A 28 V DC) NO IEC || 7.5 A 250 V AC) NC IEC || 7.5 A 28 V DC) NC IEC
Safety Reliability Data:
B10d = 100000
California Proposition 65:
WARNING: This product can expose you to chemicals including: Nickel compounds, which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other repr
Drop-Out Voltage Threshold:
>= 0.15 Uc AC
Net Weight:
0.026 kg
Pollution Degree:
3
Range Of Product:
Harmony Electromechanical Relays
Product Or Component Type:
plug-in relay
Sustainable Offer Status:
Green Premium product
China Rohs Regulation:
X
Protection Category:
RT I
Standards:
UL 508 || IEC 61810-1 || CSA C22.2 No 14
Catalog:
View
Datasheet:
View
  • Schneider Electric RPM11B7 15A Power Relay 1C/O 24Vac Pack of 10
  • Schneider Electric RPM11B7 15A Power Relay 1C/O 24Vac Pack of 10
$54.90

Description

This Harmony RPM power plug-in relay has a coil control voltage of 24V AC and has 1 changeover contact SPDT (single pole double throw) with a rating of 15A. It has large choice of number of contacts for high rated current use. It helps to reduce the size of enclosures and increases machine reliability, you can mount nearly everywhere. Plug in type enables easy installation and maintenance. Workability for hard-wired logic automated systems to complement the functions of industrial programmable logic controllers (PLCs). 0 0 0 0 0 0 0 0 0 0 0 0 0 0
View AllClose