Schneider Electric RPM41P7 15A Power Relay 4C/O 230Vac Pack of 10
Schneider Electric
$122.00
(No reviews yet)
Write a Review
Write a Review
Schneider Electric
Schneider Electric RPM41P7 15A Power Relay 4C/O 230Vac Pack of 10
This Harmony RPM power plug-in relay has a coil control voltage of 230V AC and has 4 changeover contacts 4PDT (quadruple pole double throw) with a rating of 15A. It has large choice of number of contacts for high rated current use. It helps to reduce the size of enclosures and increases machine reliability, you can mount nearly everywhere. Plug in type enables easy installation and maintenance. Workability for hard-wired logic automated systems to complement the functions of industrial programmable logic controllers (PLCs). 0 0 0 0 0 0 0 0 0 0 0
- Device Presentation:
- complete product
- [Uimp] Rated Impulse Withstand Voltage:
- 4 kV 1.2/50 µs
- Reach Free Of Svhc:
- Yes
- Minimum Switching Capacity:
- 170 mW 10 mA, 17 V
- China Rohs Regulation:
- X
- Operating Position:
- any position
- Protection Category:
- RT I
- Operating Rate:
- <= 1200 cycles/hour under load || <= 18000 cycles/hour no-load
- [Ie] Rated Operational Current:
- 15 A 277 V AC) UL || 15 A 28 V DC) UL || 15 A 250 V AC) NO IEC || 15 A 28 V DC) NO IEC || 7.5 A 250 V AC) NC IEC || 7.5 A 28 V DC) NC IEC
- Ambient Air Temperature For Operation:
- -40-55 °C
- Sustainable Offer Status:
- Green Premium product
- Product Or Component Type:
- plug-in relay
- Product Certifications:
- UL || CSA || EAC
- Rohs Exemption Information:
- Yes
- Pollution Degree:
- 3
- Weee:
- The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- Ambient Air Temperature For Storage:
- -40-85 °C
- California Proposition 65:
- WARNING: This product can expose you to chemicals including: Nickel compounds, which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other repr
- Warranty:
- 18 months
- Average Coil Consumption In Va:
- 2.5 60 Hz
- Ip Degree Of Protection:
- IP40 conforming to IEC 60529
- [Uc] Control Circuit Voltage:
- 230 V AC 50/60 Hz
- Drop-Out Voltage Threshold:
- >= 0.15 Uc AC
- Net Weight:
- 0.071 kg
- Electrical Durability:
- 100000 cycles resistive
- [Ui] Rated Insulation Voltage:
- 250 V IEC || 300 V CSA || 300 V UL
- Shape Of Pin:
- flat
- Control Type:
- lockable test button
- Series Name:
- Power
- Range Of Product:
- Harmony Electromechanical Relays
- Load Current:
- 15 A 250 V AC || 15 A 28 V DC
- Vibration Resistance:
- 3 gn +/- 1 mm 10-150 Hz)5 cycles in operation || 5 gn +/- 1 mm 10-150 Hz)5 cycles not operating
- Rated Operational Voltage Limits:
- 184...253 V AC
- Maximum Switching Capacity:
- 3750 VA || 420 W
- Operating Time:
- 20 ms at nominal voltage
- Average Resistance:
- 7350 Ohm at 20 °C +/- 15 %
- Device Short Name:
- RPM
- Standards:
- UL 508 || IEC 61810-1 || CSA C22.2 No 14
- Safety Reliability Data:
- B10d = 100000
- Shock Resistance:
- 15 gnin operation || 30 gnnot operating
- Reach Regulation:
- Free of Substances of Very High Concern above the threshold
- Environmental Disclosure:
- ENVPEP1406038EN
- [Ithe] Conventional Enclosed Thermal Current:
- 15 A -40-55 °C
- Test Levels:
- level A group mounting
- Circularity Profile:
- N/A
- Contacts Material:
- AgNi
- Status Led:
- without
- Reset Time:
- 20 ms at nominal voltage
- Utilisation Coefficient:
- 0.2
- Eu Rohs Directive:
- Pro-active compliance (Product out of EU RoHS legal scope)
- Contacts Type And Composition:
- 4 C/O
- Dielectric Strength:
- 1500 V AC between contacts with micro disconnection || 2000 V AC between coil and contact with reinforced || 2000 V AC between poles with basic
- Maximum Switching Voltage:
- 250 V IEC
- Mechanical Durability:
- 10000000 cycles
- Catalog:
- View
- Datasheet:
- View
