Schneider Electric RPM42B7 15A Power Relay Led 4C/O 24Vac
Schneider Electric
$15.69
$1200 Minimum Order for Non-stock Items or $60 Addl Schneider Handling Fee Applies
This Harmony RPM power plug-in relay has a coil control voltage of 24V AC and has 4 changeover contacts 4PDT (quadruple pole double throw) with a rating of 15A. It has large choice of number of contacts for high rated current use. It also offers LED indicator to alert on the current status of the relay. It helps to reduce the size of enclosures and increase machine reliability, you can mount nearly everywhere. This RPM product is IP40. Workability for hard-wired logic automated systems to complement the functions of industrial programmable logic controllers (PLCs). Status display with LED, clearly signal both in the day and night. 0 0 0 0 0 0 0 0 0
- Reach Regulation:
- Free of Substances of Very High Concern above the threshold
- Drop-Out Voltage Threshold:
- >= 0.15 Uc AC
- Ambient Air Temperature For Operation:
- -40-55 °C
- Pollution Degree:
- 3
- Vibration Resistance:
- 3 gn +/- 1 mm 10-150 Hz)5 cycles in operation || 5 gn +/- 1 mm 10-150 Hz)5 cycles not operating
- Dielectric Strength:
- 1500 V AC between contacts with micro disconnection || 2000 V AC between coil and contact with reinforced || 2000 V AC between poles with basic
- Sustainable Offer Status:
- Green Premium product
- Mechanical Durability:
- 10000000 cycles
- Warranty:
- 18 months
- Shock Resistance:
- 15 gnin operation || 30 gnnot operating
- [Uimp] Rated Impulse Withstand Voltage:
- 4 kV 1.2/50 µs
- Load Current:
- 15 A 250 V AC || 15 A 28 V DC
- Contacts Material:
- AgNi
- Contacts Type And Composition:
- 4 C/O
- Utilisation Coefficient:
- 0.2
- Maximum Switching Voltage:
- 250 V IEC
- China Rohs Regulation:
- X
- Reset Time:
- 20 ms at nominal voltage
- Circularity Profile:
- N/A
- Operating Time:
- 20 ms at nominal voltage
- Device Short Name:
- RPM
- Product Or Component Type:
- plug-in relay
- [Uc] Control Circuit Voltage:
- 24 V AC 50/60 Hz
- Device Presentation:
- complete product
- Protection Category:
- RT I
- [Ui] Rated Insulation Voltage:
- 250 V IEC || 300 V CSA || 300 V UL
- Control Type:
- lockable test button
- Electrical Durability:
- 100000 cycles resistive
- Maximum Switching Capacity:
- 3750 VA || 420 W
- Net Weight:
- 0.071 kg
- Range Of Product:
- Harmony Electromechanical Relays
- Series Name:
- Power
- Test Levels:
- level A group mounting
- Operating Position:
- any position
- Minimum Switching Capacity:
- 170 mW 10 mA, 17 V
- Reach Free Of Svhc:
- Yes
- Environmental Disclosure:
- ENVPEP1406038EN
- Ambient Air Temperature For Storage:
- -40-85 °C
- Average Resistance:
- 80 Ohm at 20 °C +/- 15 %
- Shape Of Pin:
- flat
- Eu Rohs Directive:
- Pro-active compliance (Product out of EU RoHS legal scope)
- California Proposition 65:
- WARNING: This product can expose you to chemicals including: Nickel compounds, which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other repr
- Rohs Exemption Information:
- Yes
- Operating Rate:
- <= 1200 cycles/hour under load || <= 18000 cycles/hour no-load
- [Ie] Rated Operational Current:
- 15 A 277 V AC) UL || 15 A 28 V DC) UL || 15 A 250 V AC) NO IEC || 15 A 28 V DC) NO IEC || 7.5 A 250 V AC) NC IEC || 7.5 A 28 V DC) NC IEC
- Standards:
- IEC 61810-1 || CSA C22.2 No 14 || UL 508
- Average Coil Consumption In Va:
- 2.5 60 Hz
- Product Certifications:
- CSA || EAC || UL
- Weee:
- The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- Rated Operational Voltage Limits:
- 19.2...26.4 V AC
- [Ithe] Conventional Enclosed Thermal Current:
- 15 A -40-55 °C
- Safety Reliability Data:
- B10d = 100000
- Status Led:
- with
- Ip Degree Of Protection:
- IP40 conforming to IEC 60529
- Catalog:
- View
- Datasheet:
- View
