Schneider Electric RPM43P7 Power Relay 4 Co Without Button With Led Pack of 40
SKU:
RPM43P7
UPC:
3389119218221
MPN:
Condition:
New
Operating Position:
any position
California Proposition 65:
WARNING: This product can expose you to chemicals including: Nickel compounds, which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other repr
Product Certifications:
UL || EAC || CSA
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Status Led:
with
Operating Rate:
<= 1200 cycles/hour under load || <= 18000 cycles/hour no-load
Contacts Type And Composition:
4 C/O
Ambient Air Temperature For Storage:
-40-85 °C
Utilisation Coefficient:
0.2
[Ithe] Conventional Enclosed Thermal Current:
15 A -40-55 °C
Device Short Name:
RPM
Vibration Resistance:
3 gn +/- 1 mm 10-150 Hz)5 cycles in operation || 5 gn +/- 1 mm 10-150 Hz)5 cycles not operating
[Uimp] Rated Impulse Withstand Voltage:
4 kV 1.2/50 µs
Rohs Exemption Information:
Yes
Ambient Air Temperature For Operation:
-40-55 °C
Protection Category:
RT I
Reach Regulation:
Free of Substances of Very High Concern above the threshold
Shock Resistance:
15 gnin operation || 30 gnnot operating
Average Coil Consumption In Va:
2.5 60 Hz
Rated Operational Voltage Limits:
184...253 V AC
[Uc] Control Circuit Voltage:
230 V AC 50/60 Hz
Safety Reliability Data:
B10d = 100000
Circularity Profile:
N/A
[Ie] Rated Operational Current:
15 A 277 V AC) UL || 15 A 28 V DC) UL || 15 A 250 V AC) NO IEC || 15 A 28 V DC) NO IEC || 7.5 A 250 V AC) NC IEC || 7.5 A 28 V DC) NC IEC
Drop-Out Voltage Threshold:
>= 0.15 Uc AC
Standards:
CSA C22.2 No 14 || UL 508 || EN/IEC 61810-1
Contacts Material:
AgNi
Maximum Switching Capacity:
3750 VA || 420 W
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Warranty:
18 months
Maximum Switching Voltage:
250 V IEC
Minimum Switching Capacity:
170 mW 10 mA, 17 V
Reset Time:
20 ms at nominal voltage
Control Type:
without lockable test button
China Rohs Regulation:
X
Electrical Durability:
100000 cycles resistive
Load Current:
15 A 250 V AC || 15 A 28 V DC
Sustainable Offer Status:
Green Premium product
Device Presentation:
complete product
Range Of Product:
Harmony Electromechanical Relays
[Ui] Rated Insulation Voltage:
250 V IEC || 300 V CSA || 300 V UL
Environmental Disclosure:
ENVPEP1406038EN
Ip Degree Of Protection:
IP40 conforming to EN/IEC 60529
Mechanical Durability:
10000000 cycles
Series Name:
Power
Operating Time:
20 ms at nominal voltage
Pollution Degree:
3
Test Levels:
level A group mounting
Net Weight:
0.071 kg
Shape Of Pin:
flat
Average Resistance:
7350 Ohm at 20 °C +/- 15 %
Dielectric Strength:
1500 V AC between contacts with micro disconnection || 2000 V AC between coil and contact with reinforced || 2000 V AC between poles with basic
RXM miniature relays are part of Harmony Electromechanical Relays. This is a plug in relay to be mounted on a RXZE socket. It is a 4 C/O relay with current rating of 6A, control circuit voltage of 24...
The RPM range of power relays has relays from 1 to 4 poles with 15A contact rating. There is a good selection of relays sockets and accessories to choose from. This 2 pole relay has two CO contacts...
This Power Plug-In Relay reflects Schneider Electric expertise in relay since 1924 by helping to reduce the size of enclosures and at the same time increasing machine reliability. It has large choice...
This Power Plug-In Relay reflects Schneider Electric expertise in relay since 1924 by helping to reduce the size of enclosures and at the same time increasing machine reliability. It has large choice...
The RXM range of miniature relays has relays from 2 to 4 poles with 3 to 12A contact ratings. There is a good selection of relays sockets and accessories to choose from. This 4 pole relay has four CO...