Schneider Electric RUMC33P7 3Co 10A Relay Cylind -Ltb+Led 230Vac Pack of 10

(No reviews yet) Write a Review
SKU:
RUMC33P7
UPC:
3606480627118
Condition:
New
Device Presentation:
complete product
Control Type:
without lockable test button
Ambient Air Temperature For Operation:
-40-55 °C
Contacts Type And Composition:
3 C/O
Range Of Product:
Harmony Electromechanical Relays
Pollution Degree:
2
[Uc] Control Circuit Voltage:
230 V AC 50/60 Hz
Utilisation Coefficient:
0.2
Reach Regulation:
Free of Substances of Very High Concern above the threshold
[Ithe] Conventional Enclosed Thermal Current:
10 A -40-55 °C
Vibration Resistance:
3 gn +/- 1 mm 10-150 Hz)5 cycles in operation || 4 gn +/- 1 mm 10-150 Hz)5 cycles not operating
Average Coil Consumption In Va:
3-3 60 Hz
Load Current:
10 A 250 V AC || 10 A 28 V DC
Circularity Profile:
N/A
Protection Category:
RT I
Electrical Durability:
100000 cycles resistive
Drop-Out Voltage Threshold:
>= 0.15 Uc AC
Standards:
IEC 61810-1 || UL 508 || CSA C22.2 No 14
Rohs Exemption Information:
Yes
[Ie] Rated Operational Current:
10 A at 277 V AC conforming to UL || 10 A at 30 V DC conforming to UL || 10 A at 277 V AC (same polarity) conforming to CSA || 10 A at 30 V DC conforming to CSA || 5 A at 250 V AC (NC) conforming to IEC || 5 A at 28 V DC (NC) conforming to IEC || 10
Dielectric Strength:
1500 V AC between contacts with micro disconnection || 2500 V AC between coil and contact with reinforced || 2000 V AC between poles with basic
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Net Weight:
0.086 kg
Operating Rate:
<= 18000 cycles/hour no-load || <= 1200 cycles/hour under load
Minimum Switching Capacity:
170 mW 10 mA, 17 V
Series Name:
Universal
Status Led:
with
Reset Time:
20 ms at nominal voltage
Reach Free Of Svhc:
Yes
Maximum Switching Voltage:
250 V IEC
China Rohs Regulation:
X
Product Or Component Type:
plug-in relay
Maximum Switching Capacity:
2500 VA/280 W
Contacts Material:
AgNi
Operating Time:
20 ms at nominal voltage
Average Resistance:
6800 Ohm 20 °C +/- 15 %
Safety Reliability Data:
B10d = 100000
[Uimp] Rated Impulse Withstand Voltage:
4 kV 1.2/50 µs)
Operating Position:
any position
Shape Of Pin:
cylindrical
Mechanical Durability:
5000000 cycles
Rated Operational Voltage Limits:
184...253 V AC
[Ui] Rated Insulation Voltage:
250 V IEC || 300 V CSA || 300 V UL
Sustainable Offer Status:
Green Premium product
California Proposition 65:
WARNING: This product can expose you to chemicals including: Nickel compounds, which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other repr
Ip Degree Of Protection:
IP40
Product Certifications:
UL || EAC || CSA
Test Levels:
level A group mounting
Environmental Disclosure:
ENVPEP1406038EN
Ambient Air Temperature For Storage:
-40-85 °C
Shock Resistance:
10 gn 11 ms) in operation IEC 60068-2-27 || 10 gn 11 ms) not operating IEC 60068-2-27
Device Short Name:
RUM
$141.50

Description

This Harmony RUM universal plug-in relay uses cylindrical pins, has a control coil voltage of 230V AC and has 3 changeover contacts triple pole double throw with a rating of 10A." "It provides a complete system solution for the most demanding applications." "It also offers “Power On” LED for readiness." "It helps to reduce the size of enclosures and increase machine reliability, you can mount nearly everywhere." "The product is IP40 and has a transparent cover allowing operator to visually inspect the status of contacts." "Workability for hard-wired logic automated systems to complement the functions of industrial programmable logic controllers (PLCs)." "Status display with LED, clearly signal both in the day and night." 0 0 0 0 0 0 0 0 0
View AllClose