Schneider Electric RUMF23FD 2Co 10A Relay Faston -Ltb+Led 110Vdc Pack of 10

(No reviews yet) Write a Review
SKU:
RUMF23FD
UPC:
3606480627330
Condition:
New
Product Certifications:
EAC || UL || CSA
Reach Regulation:
Free of Substances of Very High Concern above the threshold
Standards:
UL 508 || IEC 61810-1 || CSA C22.2 No 14
Average Resistance:
7300 Ohm 20 °C +/- 15 %
[Uc] Control Circuit Voltage:
110 V DC
Safety Reliability Data:
B10d = 100000
Dielectric Strength:
1500 V AC between contacts with micro disconnection || 2500 V AC between coil and contact with reinforced || 2000 V AC between poles with basic
Maximum Switching Voltage:
250 V IEC
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Operating Rate:
<= 18000 cycles/hour no-load || <= 1200 cycles/hour under load
Utilisation Coefficient:
0.2
[Uimp] Rated Impulse Withstand Voltage:
4 kV 1.2/50 µs)
Device Presentation:
complete product
Rated Operational Voltage Limits:
88...121 V DC
Product Or Component Type:
plug-in relay
[Ithe] Conventional Enclosed Thermal Current:
10 A -40-55 °C
China Rohs Regulation:
X
Shock Resistance:
10 gn 11 ms) in operation IEC 60068-2-27 || 10 gn 11 ms) not operating IEC 60068-2-27
Ip Degree Of Protection:
IP40
Average Coil Consumption:
1.4 W
Device Short Name:
RUM
Contacts Material:
AgNi
Vibration Resistance:
3 gn +/- 1 mm 10-150 Hz)5 cycles in operation || 4 gn +/- 1 mm 10-150 Hz)5 cycles not operating
Ambient Air Temperature For Operation:
-40-55 °C
Control Type:
without lockable test button
Maximum Switching Capacity:
2500 VA/280 W
Range Of Product:
Harmony Electromechanical Relays
Status Led:
with
Protection Category:
RT I
Rohs Exemption Information:
Yes
Operating Time:
20 ms at nominal voltage
Operating Position:
any position
[Ie] Rated Operational Current:
10 A at 277 V AC conforming to UL || 10 A at 30 V DC conforming to UL || 10 A at 30 V DC conforming to CSA || 5 A at 250 V AC (NC) conforming to IEC || 5 A at 28 V DC (NC) conforming to IEC || 10 A at 250 V AC (NO) conforming to IEC || 10 A at 28 V D
Minimum Switching Capacity:
170 mW 10 mA, 17 V
Pollution Degree:
3
Electrical Durability:
100000 cycles resistive
Net Weight:
0.086 kg
Reach Free Of Svhc:
Yes
Series Name:
Universal
Test Levels:
level A group mounting
Environmental Disclosure:
ENVPEP1406038EN
[Ui] Rated Insulation Voltage:
250 V IEC || 300 V CSA || 300 V UL
Reset Time:
20 ms at nominal voltage
Shape Of Pin:
flat
Load Current:
10 A 250 V AC || 10 A 28 V DC
Ambient Air Temperature For Storage:
-40-85 °C
California Proposition 65:
WARNING: This product can expose you to chemicals including: Nickel compounds, which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other repr
Circularity Profile:
N/A
Sustainable Offer Status:
Green Premium product
Contacts Type And Composition:
2 C/O
Mechanical Durability:
5000000 cycles
Drop-Out Voltage Threshold:
>= 0.1 Uc DC
$190.30

Description

This Harmony RUM universal plug-in relay uses flat pins, has a control coil voltage of 110V DC and has 2 changeover contacts double pole double throw with a rating of 10A." "It provides a complete system solution for the most demanding applications." "It also offers “Power On” LED for readiness." "It helps to reduce the size of enclosures and increase machine reliability, you can mount nearly everywhere." "The product is IP40 and has a transparent cover allowing operator to visually inspect the status of contacts." "Workability for hard-wired logic automated systems to complement the functions of industrial programmable logic controllers (PLCs)." "Status display with LED, clearly signal both in the day and night." 0 0 0 0 0 0 0 0 0
View AllClose