Schneider Electric RUMF33F7 3Co 10A Relay Faston -Ltb+Led 120Vac
Schneider Electric
$16.70
$1200 Minimum Order for Non-stock Items or $60 Addl Schneider Handling Fee Applies
This Harmony RUM universal plug-in relay uses flat pins, has a control coil voltage of 120V AC and has 3 changeover contacts triple pole double throw with a rating of 10A." "It provides a complete system solution for the most demanding applications." "It also offers “Power On” LED for readiness." "It helps to reduce the size of enclosures and increase machine reliability, you can mount nearly everywhere." "The product is IP40 and has a transparent cover allowing operator to visually inspect the status of contacts." "Workability for hard-wired logic automated systems to complement the functions of industrial programmable logic controllers (PLCs)." "Status display with LED, clearly signal both in the day and night." 0 0 0 0 0 0 0 0 0
- Reach Free Of Svhc:
- Yes
- Product Certifications:
- CSA || UL || EAC
- Electrical Durability:
- 100000 cycles resistive
- Contacts Type And Composition:
- 3 C/O
- Rohs Exemption Information:
- Yes
- Ambient Air Temperature For Operation:
- -40-55 °C
- Ip Degree Of Protection:
- IP40
- Standards:
- UL 508 || CSA C22.2 No 14 || IEC 61810-1
- [Ui] Rated Insulation Voltage:
- 250 V IEC || 300 V CSA || 300 V UL
- Shape Of Pin:
- flat
- Operating Rate:
- <= 18000 cycles/hour no-load || <= 1200 cycles/hour under load
- Eu Rohs Directive:
- Pro-active compliance (Product out of EU RoHS legal scope)
- Device Short Name:
- RUM
- Dielectric Strength:
- 1500 V AC between contacts with micro disconnection || 2500 V AC between coil and contact with reinforced || 2000 V AC between poles with basic
- China Rohs Regulation:
- X
- Shock Resistance:
- 10 gn 11 ms) in operation IEC 60068-2-27 || 10 gn 11 ms) not operating IEC 60068-2-27
- Drop-Out Voltage Threshold:
- >= 0.15 Uc AC
- Device Presentation:
- complete product
- Reach Regulation:
- Free of Substances of Very High Concern above the threshold
- California Proposition 65:
- WARNING: This product can expose you to chemicals including: Nickel compounds, which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other repr
- Environmental Disclosure:
- ENVPEP1406038EN
- Net Weight:
- 0.086 kg
- [Uimp] Rated Impulse Withstand Voltage:
- 4 kV 1.2/50 µs)
- Product Or Component Type:
- plug-in relay
- Average Coil Consumption In Va:
- 3-3 60 Hz
- Vibration Resistance:
- 3 gn +/- 1 mm 10-150 Hz)5 cycles in operation || 4 gn +/- 1 mm 10-150 Hz)5 cycles not operating
- Utilisation Coefficient:
- 0.2
- Load Current:
- 10 A 250 V AC || 10 A 28 V DC
- Safety Reliability Data:
- B10d = 100000
- Rated Operational Voltage Limits:
- 96...132 V AC
- Sustainable Offer Status:
- Green Premium product
- Minimum Switching Capacity:
- 170 mW 10 mA, 17 V
- Mechanical Durability:
- 5000000 cycles
- Series Name:
- Universal
- [Uc] Control Circuit Voltage:
- 120 V AC 50/60 Hz
- Protection Category:
- RT I
- Circularity Profile:
- N/A
- Average Resistance:
- 1700 Ohm 20 °C +/- 15 %
- [Ithe] Conventional Enclosed Thermal Current:
- 10 A -40-55 °C
- Maximum Switching Voltage:
- 250 V IEC
- Status Led:
- with
- Ambient Air Temperature For Storage:
- -40-85 °C
- Range Of Product:
- Harmony Electromechanical Relays
- Reset Time:
- 20 ms at nominal voltage
- Contacts Material:
- AgNi
- Test Levels:
- level A group mounting
- Operating Position:
- any position
- Control Type:
- without lockable test button
- [Ie] Rated Operational Current:
- 10 A at 277 V AC conforming to UL || 10 A at 30 V DC conforming to UL || 10 A at 277 V AC (same polarity) conforming to CSA || 10 A at 30 V DC conforming to CSA || 5 A at 250 V AC (NC) conforming to IEC || 5 A at 28 V DC (NC) conforming to IEC || 10
- Operating Time:
- 20 ms at nominal voltage
- Maximum Switching Capacity:
- 2500 VA/280 W
- Pollution Degree:
- 3
- Catalog:
- View
- Datasheet:
- View
