Schneider Electric RXM3AB2FD Miniature Relay Led 3C/O 110Vdc Pack of 10

(No reviews yet) Write a Review
SKU:
RXM3AB2FD
UPC:
3.38912E+12
Condition:
New
[Ie] Rated Operational Current:
10 A 28 V DC) NO IEC || 10 A 250 V AC) NO IEC || 5 A 28 V DC) NC IEC || 5 A 250 V AC) NC IEC || 10 A 30 V DC) UL || 10 A 277 V AC) UL
Ip Degree Of Protection:
IP40 conforming to IEC 60529
Drop-Out Voltage Threshold:
>= 0.1 Uc
China Rohs Regulation:
X
[Uc] Control Circuit Voltage:
110 V DC
California Proposition 65:
WARNING: This product can expose you to chemicals including: Nickel compounds, which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other repr
Range Of Product:
Harmony Electromechanical Relays
Continuous Output Current:
6.7 A
Cad Overall Height:
82.8 mm
Ambient Air Temperature For Storage:
-40-85 °C
Average Resistance:
13440 Ohm 20 °C +/- 10 %
Device Presentation:
complete product
Vibration Resistance:
3 gn +/- 1 mm 10-150 Hz)5 cycles in operation || 5 gn +/- 1 mm 10-150 Hz)5 cycles not operating
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Operating Time:
20 ms
Shape Of Pin:
flat
Shock Resistance:
10 gnin operation || 30 gnnot operating
Product Certifications:
UL || Lloyd's || CE || CSA || GOST || IECEE CB Scheme
Protection Category:
RT I
Dielectric Strength:
1300 V AC between contacts with micro disconnection || 2000 V AC between coil and contact || 2000 V AC between poles
Utilisation Coefficient:
0.2
Reach Regulation:
Free of Substances of Very High Concern above the threshold
Load Current:
10 A 250 V AC || 10 A 28 V DC
Maximum Switching Voltage:
250 V IEC
Rated Operational Voltage Limits:
88...121 V DC
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Series Name:
Miniature
Operating Rate:
<= 1200 cycles/hour under load || <= 18000 cycles/hour no-load
Sustainable Offer Status:
Green Premium product
Control Type:
lockable test button
Net Weight:
0.037 kg
[Uimp] Rated Impulse Withstand Voltage:
4 kV 1.2/50 µs
Reach Free Of Svhc:
Yes
Pollution Degree:
2
Reset Time:
20 ms
Status Led:
with
Device Short Name:
RXM
Electrical Durability:
100000 cycles resistive
Warranty:
18 months
Test Levels:
level A group mounting
[Ui] Rated Insulation Voltage:
250 V IEC || 300 V CSA || 300 V UL
Cad Overall Depth:
80.35 mm
Mechanical Durability:
10000000 cycles
Ambient Air Temperature For Operation:
-40-55 °C
Environmental Disclosure:
ENVPEP2106019EN
Minimum Switching Capacity:
170 mW 10 mA, 17 V
Maximum Switching Capacity:
2500 VA/280 W
Rohs Exemption Information:
Yes
Product Or Component Type:
plug-in relay
Circularity Profile:
ENVEOLI2106019EN
Operating Position:
any position
Contacts Type And Composition:
3 C/O
Contacts Material:
AgNi
Safety Reliability Data:
B10d = 100000
Average Coil Consumption:
0.9 W
Standards:
UL 508 || IEC 61810-1 || CSA C22.2 No 14
Brochure:
View
Catalog:
View
Datasheet:
View
  • Schneider Electric RXM3AB2FD Miniature Relay Led 3C/O 110Vdc Pack of 10
  • Schneider Electric RXM3AB2FD Miniature Relay Led 3C/O 110Vdc Pack of 10
$80.50

Description

This Harmony RXM miniature plug-in relay has a coil control voltage of 110V DC and has 3 changeover contacts 3PDT (triple pole double throw) with a rating of 10A." "It has large choice of number of contacts for high rated current use with space-saving design." "It also offers one-step lockable test button and “Power On” LED for readiness." "It helps to reduce the size of enclosures and increase machine reliability, you can mount nearly everywhere." "The product is IP40 and has a transparent cover allowing operator to visually inspect the status of contacts." "Workability for hard-wired logic automated systems to complement the functions of industrial programmable logic controllers (PLCs)." "Status display with LED, clearly signal both in the day and night." 0 0 "It is a green premium product and conforms to international standard and certifications like IEC, CE, UL, CSA, EAC, Lloyd's, RoHS and REACH." "RXM Relay should be used with a RXZE socket (screw clamp, screw connector, push-in terminal). To protect against vibrations, plastic/metal clamp can be added to the socket. Protection modules and marking legend are also available." "It is sold in lots of 10 and reference includes relay only." 0 "The RXM plug-in relays are a series of industrial plug-in relays designed for both simple and complex automation systems and available with 2 CO (12A), 3 CO (10A), 4 CO (6A) contacts, 4 CO (3A) low level contacts." 0 0
View AllClose