Schneider Electric SH31002P12A1000 Sh3 Motor 100.2 Key Mlt Str Ip54
SKU:
SH31002P12A1000
UPC:
3.60648E+12
MPN:
Condition:
New
Availability:
Schneider orders under $1250 will incur a $60 processing fee at checkout
Circle Diameter Of The Mounting Holes:
115 mm
Maximum Mechanical Speed:
6000 rpm
Type Of Cooling:
natural convection
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Warranty:
18 months
Continuous Stall Torque:
5.8 N.m 115...480 V three phase
Continuous Stall Current:
4.8 A
Mercury Free:
Yes
Nominal Torque:
5.5 N.m 115 V single phase || 5.2 N.m 230 V single phase || 4.6 N.m 400 V three phase || 4.4 N.m 480 V three phase
Centring Collar Depth:
3.5 mm
Sustainable Offer Status:
Green Premium product
Continuous Power:
1900 W
Device Short Name:
SH3.....P
Holding Brake:
without
Product Or Component Type:
servo motor
Number Of Motor Poles:
4
Electrical Connection:
straight connector
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Range Compatibility:
PacDrive 3
Centring Collar Diameter:
95 mm
Circularity Profile:
N/A
Key Width:
6 mm
Maximum Current Irms:
17.1 A
Rohs Exemption Information:
Yes
Torque Constant:
1.21 N.m/A 120 °C
Shaft Diameter:
19 mm
Back Emf Constant:
77 V/krpm 20 °C
Mounting Support:
international standard flange
Motor Flange Size:
100 mm
Nominal Output Power:
580 W 115 V single phase || 1090 W 230 V single phase || 1930 W 400 V three phase || 2210 W 480 V three phase
Number Of Mounting Holes:
4
Stator Resistance:
2.4 Ohm
Speed Feedback Resolution:
128 periods
Net Weight:
5.8 kg
Nominal Speed:
1000 rpm 115 V single phase || 2000 rpm 230 V single phase || 4000 rpm 400 V three phase || 4800 rpm 480 V three phase
Environmental Disclosure:
ENVPEP111049EN
Phase:
three phase
Shaft End:
parallel key
Ip Degree Of Protection:
shaft bushing without shaft seal ring IP54 EN/IEC 60034-5 || motor IP65 EN/IEC 60034-5 || shaft bushing IP65 EN/IEC 60034-5
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
China Rohs Regulation:
X
[Us] Rated Supply Voltage:
115...480 V
Maximum Axial Force Fa:
160 N
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Peak Stall Torque:
18.3 N.m 115...480 V three phase
Mounting Holes Diameter:
9.0 mm
Pvc Free:
Yes
Shaft Length:
40 mm
Encoder Type:
absolute multiturn SinCos Hiperface
Rotor Inertia:
2.31 kg.cm²
Length:
204.5 mm
Stator Inductance:
19.5 mH
Maximum Radial Force Fr:
990 N 1000 rpm || 790 N 2000 rpm || 690 N 3000 rpm || 620 N 4000 rpm
