Schneider Electric SH31003P02F1000 Sh3 Motor 100.3 Mlt Brk Str Ip54
SKU:
SH31003P02F1000
UPC:
3606481972606
MPN:
Condition:
New
Nominal Speed:
1000 rpm 115 V single phase || 2000 rpm 230 V single phase || 4000 rpm 400 V three phase || 4800 rpm 480 V three phase
Range Compatibility:
PacDrive 3
Back Emf Constant:
77 V/krpm 20 °C
Number Of Motor Poles:
4
Continuous Power:
2400 W
[Us] Rated Supply Voltage:
115...480 V
Circularity Profile:
N/A
Stator Resistance:
1.43 Ohm
Pvc Free:
Yes
Phase:
three phase
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Torque Constant:
1.22 N.m/A 120 °C
China Rohs Regulation:
X
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Circle Diameter Of The Mounting Holes:
115 mm
Centring Collar Depth:
3.5 mm
Continuous Stall Torque:
8 N.m 115...480 V three phase
Mounting Support:
international standard flange
Warranty:
18 months
Nominal Output Power:
790 W 115 V single phase || 1470 W 230 V single phase || 2390 W 400 V three phase || 2560 W 480 V three phase
Shaft End:
smooth shaft
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Device Short Name:
SH3.....P
Shaft Length:
40 mm
Rohs Exemption Information:
Yes
Rotor Inertia:
3.838 kg.cm²
Continuous Stall Current:
6.6 A
Mercury Free:
Yes
Maximum Radial Force Fr:
1050 N 1000 rpm || 830 N 2000 rpm || 730 N 3000 rpm || 660 N 4000 rpm
Motor Flange Size:
100 mm
Ip Degree Of Protection:
shaft bushing without shaft seal ring IP54 EN/IEC 60034-5 || motor IP65 EN/IEC 60034-5 || shaft bushing IP65 EN/IEC 60034-5
Type Of Cooling:
natural convection
Peak Stall Torque:
28.3 N.m 115...480 V three phase
Electrical Connection:
rotatable right angled connector
Mounting Holes Diameter:
9.0 mm
Sustainable Offer Status:
Green Premium product
Maximum Mechanical Speed:
6000 rpm
Speed Feedback Resolution:
128 periods
Length:
271.5 mm
Encoder Type:
absolute multiturn SinCos Hiperface
Nominal Torque:
5.1 N.m 480 V three phase || 7.5 N.m 115 V single phase || 7 N.m 230 V single phase || 5.7 N.m 400 V three phase
Number Of Mounting Holes:
4
Maximum Current Irms:
28.3 A
Holding Brake:
with
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
