
Schneider Electric SH32052P12F1000 Sh3 Motor 205.2 Key Mlt Brk Str Ip54
Schneider Electric
$7,608.43
servo motor SH3 205 64,9Nm,key,multi,brake,str.conn,IP54/IP65,3.8k RPM
- Stator Inductance:
- 8.2 mH
- Maximum Current Irms:
- 96.8 A
- Shaft End:
- parallel key
- Maximum Axial Force Fa:
- 740 N
- Peak Stall Torque:
- 220 N.m 115...480 V three phase
- Holding Brake:
- with
- Weee:
- The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- Range Compatibility:
- PacDrive 3
- Device Short Name:
- SH3.....P
- Environmental Disclosure:
- ENVPEP111049EN
- Circle Diameter Of The Mounting Holes:
- 215 mm
- Ip Degree Of Protection:
- shaft bushing without shaft seal ring IP54 EN/IEC 60034-5 || motor IP65 EN/IEC 60034-5 || shaft bushing IP65 EN/IEC 60034-5
- Back Emf Constant:
- 161 V/krpm 20 °C
- Continuous Power:
- 7900 W
- Shaft Diameter:
- 38 mm
- Motor Flange Size:
- 205 mm
- Number Of Mounting Holes:
- 4
- Encoder Type:
- absolute multiturn SinCos Hiperface
- Mercury Free:
- Yes
- Holding Torque:
- 80 N.m
- Reach Regulation:
- Reference contains Substances of Very High Concern above the threshold
- Product Or Component Type:
- servo motor
- Rohs Exemption Information:
- Yes
- Key Width:
- 10 mm
- Pvc Free:
- Yes
- Mounting Holes Diameter:
- 14 mm
- Phase:
- three phase
- Stator Resistance:
- 0.3 Ohm
- Centring Collar Diameter:
- 180 mm
- Nominal Output Power:
- 3230 W 115 V single phase || 5860 W 230 V single phase || 7980 W 400 V three phase || 7140 W 480 V three phase
- Rotor Inertia:
- 145 kg.cm²
- Maximum Mechanical Speed:
- 3800 rpm
- Type Of Cooling:
- natural convection
- China Rohs Regulation:
- X
- California Proposition 65:
- WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Maximum Radial Force Fr:
- 4200 N 1000 rpm || 3330 N 2000 rpm || 2910 N 3000 rpm
- Shaft Length:
- 80 mm
- Sustainable Offer Status:
- Green Premium product
- Eu Rohs Directive:
- Pro-active compliance (Product out of EU RoHS legal scope)
- Torque Constant:
- 2.58 N.m/A 120 °C
- Nominal Torque:
- 61.6 N.m 115 V single phase || 56 N.m 230 V single phase || 38.1 N.m 400 V three phase || 28.4 N.m 480 V three phase
- Number Of Motor Poles:
- 5
- [Us] Rated Supply Voltage:
- 115...480 V
- Warranty:
- 18 months
- Circularity Profile:
- N/A
- Net Weight:
- 53.6 kg
- Electrical Connection:
- rotatable right angled connector
- Nominal Speed:
- 500 rpm 115 V single phase || 1000 rpm 230 V single phase || 2000 rpm 400 V three phase || 2400 rpm 480 V three phase
- Continuous Stall Torque:
- 64.9 N.m 115...480 V three phase
- Length:
- 454.5 mm
- Mounting Support:
- international standard flange
- Centring Collar Depth:
- 4 mm
- Speed Feedback Resolution:
- 128 periods
- Continuous Stall Current:
- 25.7 A
- Catalog:
- View
- Datasheet:
- View