Schneider Electric SSD1A320M7C3 Solid State Relay-Din Rail, Single Phase

(No reviews yet) Write a Review
SKU:
SSD1A320M7C3
UPC:
3606489807870
Condition:
New
Input Current Limits:
6-10 mA
Line Rated Current:
20 A
Shock Resistance:
50 gn for 11 ms (peak acceleration) , longitudinal position conforming to IEC 60068-2-27 || 30 gn for 11 ms (peak acceleration) , vertical position conforming to IEC 60068-2-27
Circularity Profile:
ENVEOLI1508007EN
Tightening Torque:
2...2.2 N.m for load output || 18...20 lb.in for load output
Pollution Degree:
2
Vibration Resistance:
0.75 mm (f = 10-150 Hz) conforming to IEC 60068-2-6
Inrush Current:
300 A at 60 Hz
Width:
22.5 mm
Product Or Component Type:
solid state relay up to 20 A
Number Of Channels:
1
Network Frequency:
47...440 Hz
Local Signalling:
for control voltage LED (green)
China Rohs Regulation:
X
Maximum Voltage Drop:
<1.3 V on-state
Product Configuration Type:
contactor configuration with pluggable spring input
Ip Degree Of Protection:
IP20
Solid State Output Type:
zero voltage switching
Net Weight:
0.301 kg
Flame Retardance:
V-0 conforming to UL 94
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Ambient Air Temperature For Operation:
-40-80 °C
Range Of Product:
Harmony Solid State Relays
Contact Form:
Form 5 semiconductor output DOL contactor
Environmental Disclosure:
ENVPEP1508007EN
Coordination Type:
type 1 || type 2
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Height:
91.9 mm
Standards:
IEC 61373:class B: category 1 || IEC 60947-4-3 || IEC 62314 || IEC 60950-1 || CSA C22.2 No 14-13 || UL 508
Absolute Maximum Voltage:
1200 V
Mounting Support:
35 mm symmetrical DIN rail conforming to IEC 60715
Load Current:
0.1-20 A
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Dv/Dt:
500 V/µs off-state at maximum rated voltage
Device Presentation:
complete product
Connections - Terminals:
plug-inspring terminals, clamping connection capacity:0.13...3.30 mm², AWG 26...AWG 12 for input || telescopic screw, clamping connection capacity:0.75...10 mm², AWG 20...AWG 8 for output
[Uc] Control Circuit Voltage:
90...280 V AC/DC
Rohs Exemption Information:
Yes
Ambient Air Temperature For Storage:
-40-100 °C
Output Switching Mode:
zero voltage switching
Insulation Resistance:
1000 MOhm at 500 V DC
Phase:
1 phase
Maximum I²T For Fusing:
409 A².s for 10 ms || 375 A².s for 8.33 ms
Minimum Switching Voltage:
90 V AC/DC turn-on
Output Voltage:
48...600 V AC
Power Factor:
0.5 with maximum load
Maximum Leakage Current:
1 mA off-state
Depth:
133.8 mm
Device Short Name:
SSD1
Motor Power Kw:
0.37 kW/0.5 hp at 120 V AC || 1.12 kW/1.5 hp at 240 V AC || 2.24 kW/3 hp at 480 V AC
Electromagnetic Compatibility:
electrostatic discharge 6 kV criteria A contact discharge conforming to IEC 61000-4-2 || electrostatic discharge 8 kV criteria A air discharge conforming to IEC 61000-4-2 || conducted RF disturbances 10 V, 0.15...80 MHz criteria A level 3 conforming
Maximum Switching Voltage:
5 V AC/DC turn-off
Dielectric Strength:
4 kV AC for input/output circuit || 4 kV AC for input or output to case
[Uimp] Rated Impulse Withstand Voltage:
6 kV for input/output circuit || 6 kV for input or output to case
Rated Duty:
uninterrupted
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Overvoltage Category:
III
Mercury Free:
Yes
Response Time:
20 ms (turn-on) || 30 ms (turn-off)
Sustainable Offer Status:
Green Premium product
  • Schneider Electric SSD1A320M7C3 Solid State Relay-Din Rail, Single Phase
  • Schneider Electric SSD1A320M7C3 Solid State Relay-Din Rail, Single Phase
  • Schneider Electric SSD1A320M7C3 Solid State Relay-Din Rail, Single Phase
$73.27

Description

This solid state DIN rail mounted relay belongs to the Schneider Electric Harmony solid state relays range. This electrical relay mounts on 35mm DIN rail and comes with a secure mounting latch. This is a 20A power rated relay with pluggable spring input contactor type configuration and zero voltage switching. This single-phase relay has a IP20 built-in heat sink and a built-in transient overvoltage protection. It is controlled with a 90Vdc/Vac to 280Vdc/Vac input, has a rated load voltage of 48Vac to 600Vac. It also has a LED input voltage status indicator and clip-in legend for easy identification. It weighs 0.301Kg and its dimensions are, 22.5mm wide, 133.8mm deep, 91.9mm high. It is the ideal solution for packaging, plastic molding, textile, and heating furnace applications. This relay conforms to international standards like EN/IEC 60068, IEC 61373, UL 508, CSA C22.2 No 14-13 and certifications like UL and CSA. Besides the existing standard screw connection for input and output, SSD provides more wiring options like the spring or screw pluggable input connectors, and telescopic or clamp cage output terminals.
View AllClose