Schneider Electric SSD1A320M7RC3 Solid State Relay-Din Rail, Single Phase

(No reviews yet) Write a Review
SKU:
SSD1A320M7RC3
UPC:
3606489807887
Condition:
New
Sustainable Offer Status:
Green Premium product
Maximum I²T For Fusing:
409 A².s for 10 ms || 375 A².s for 8.33 ms
Height:
91.9 mm
Maximum Switching Voltage:
5 V AC/DC turn-off
[Uc] Control Circuit Voltage:
90...280 V AC/DC
Overvoltage Category:
III
Mercury Free:
Yes
Local Signalling:
for control voltage LED (green)
Standards:
IEC 61373:class B: category 1 || IEC 60947-4-3 || IEC 62314 || IEC 60950-1 || CSA C22.2 No 14-13 || UL 508
Motor Power Kw:
0.37 kW/0.5 hp at 120 V AC || 1.12 kW/1.5 hp at 240 V AC || 2.24 kW/3 hp at 480 V AC
Output Switching Mode:
random voltage switching
Number Of Channels:
1
[Uimp] Rated Impulse Withstand Voltage:
6 kV for input/output circuit || 6 kV for input or output to case
Product Or Component Type:
solid state relay up to 20 A
Ambient Air Temperature For Storage:
-40-100 °C
Solid State Output Type:
random voltage switching
Depth:
133.8 mm
Network Frequency:
47...440 Hz
Load Current:
0.1-20 A
Vibration Resistance:
0.75 mm (f = 10-150 Hz) conforming to IEC 60068-2-6
China Rohs Regulation:
X
Device Short Name:
SSD1
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Dv/Dt:
500 V/µs off-state at maximum rated voltage
Maximum Voltage Drop:
<1.3 V on-state
Dielectric Strength:
4 kV AC for input/output circuit || 4 kV AC for input or output to case
Output Voltage:
48...600 V AC
Tightening Torque:
2...2.2 N.m for load output || 18...20 lb.in for load output
Rohs Exemption Information:
Yes
Insulation Resistance:
1000 MOhm at 500 V DC
Absolute Maximum Voltage:
1200 V
Width:
22.5 mm
Power Factor:
0.5 with maximum load
Inrush Current:
300 A at 60 Hz
Mounting Support:
35 mm symmetrical DIN rail conforming to IEC 60715
Minimum Switching Voltage:
90 V AC/DC turn-on
Net Weight:
0.301 kg
Input Current Limits:
6-10 mA
Coordination Type:
type 1 || type 2
Line Rated Current:
20 A
Rated Duty:
uninterrupted
Product Configuration Type:
contactor configuration with pluggable spring input
Contact Form:
Form 5 semiconductor output DOL contactor
Pollution Degree:
2
Ip Degree Of Protection:
IP20
Device Presentation:
complete product
Circularity Profile:
ENVEOLI1508007EN
Ambient Air Temperature For Operation:
-40-80 °C
Electromagnetic Compatibility:
electrostatic discharge 6 kV criteria A contact discharge conforming to IEC 61000-4-2 || electrostatic discharge 8 kV criteria A air discharge conforming to IEC 61000-4-2 || conducted RF disturbances 10 V, 0.15...80 MHz criteria A level 3 conforming
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Shock Resistance:
50 gn for 11 ms (peak acceleration) , longitudinal position conforming to IEC 60068-2-27 || 30 gn for 11 ms (peak acceleration) , vertical position conforming to IEC 60068-2-27
Range Of Product:
Harmony Solid State Relays
Flame Retardance:
V-0 conforming to UL 94
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Connections - Terminals:
plug-inspring terminals, clamping connection capacity:0.13...3.30 mm², AWG 26...AWG 12 for input || telescopic screw, clamping connection capacity:0.75...10 mm², AWG 20...AWG 8 for output
Environmental Disclosure:
ENVPEP1508007EN
Phase:
1 phase
Maximum Leakage Current:
1 mA off-state
Response Time:
20 ms (turn-on) || 30 ms (turn-off)
  • Schneider Electric SSD1A320M7RC3 Solid State Relay-Din Rail, Single Phase
  • Schneider Electric SSD1A320M7RC3 Solid State Relay-Din Rail, Single Phase
  • Schneider Electric SSD1A320M7RC3 Solid State Relay-Din Rail, Single Phase
$74.74

Description

This solid state DIN rail mounted relay belongs to the Schneider Electric Harmony solid state relays range. This electrical relay mounts on 35mm DIN rail and comes with a secure mounting latch. This is a 20A power rated relay with pluggable spring input contactor type configuration and random switching. This single-phase relay has a IP20 built-in heat sink and a built-in transient overvoltage protection. It is controlled with a 90Vdc/Vac to 280Vdc/Vac input, has a rated load voltage of 48Vac to 600Vac. It also has a LED input voltage status indicator and clip-in legend for easy identification. It weighs 0.301Kg and its dimensions are, 22.5mm wide, 133.8mm deep, 91.9mm high. It is the ideal solution for packaging, plastic molding, textile, and heating furnace applications. This relay conforms to international standards like EN/IEC 60068, IEC 61373, UL 508, CSA C22.2 No 14-13 and certifications like UL and CSA. Besides the existing standard screw connection for input and output, SSD provides more wiring options like the spring or screw pluggable input connectors, and telescopic or clamp cage output terminals.
View AllClose