Schneider Electric SSM1A112B7 1P Ssr 12A@24-280Vac Zero,18-36Vac
SKU:
SSM1A112B7
UPC:
3606480579516
MPN:
Condition:
New
Ip Degree Of Protection:
IP20
Ambient Air Temperature For Operation:
-30-80 °C
Tightening Torque:
0.5...0.8 N.m for input || 0.5...0.8 N.m for output
Height:
90.3 mm
Overvoltage Category:
III
Solid State Output Type:
zero voltage switching || SCR output
Maximum Voltage Drop:
<1.3 V on-state
Minimum Switching Voltage:
18 V AC turn-on
Input Current Limits:
3.5-8.5 mA
Maximum Leakage Current:
0.1 mA off-state
Response Time:
0.5 cycle (turn-on) || 30 ms (turn-off)
Maximum I²T For Fusing:
2560 A².s for 10 ms at 50 Hz || 2330 A².s for 8.33 ms at 60 Hz
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
[Uc] Control Circuit Voltage:
18...36 V AC
Connections - Terminals:
screw terminals 1 x 0.3...1 x 1.5 mm², AWG 22...AWG 16) input || screw terminals 1 x 0.3...1 x 2.5 mm², AWG 22...AWG 14) output
Flame Retardance:
V0 conforming to UL 94
Environmental Disclosure:
ENVPEP1307069EN
Surge Current:
715 A 16.6 ms || 750 A 20 ms
Insulation Resistance:
1000 MOhm at 500 V DC
Dielectric Strength:
4 kV AC for input/output || 4 kV AC for input or output to case
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Mounting Support:
symmetrical DIN rail
Width:
18 mm
Output Switching Mode:
zero voltage switching
Output Voltage:
24...280 V AC
Pollution Degree:
2
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
This Harmony SSM solid state modular DIN rail single-phase relay is rated 12A, is controlled with a 18V to 36V AC input, has a rated load voltage of 24V to 280V AC with random voltage switching,...
This Harmony SSM solid state modular DIN rail single-phase relay is rated 12A, is controlled with a 200V to 265V AC input, has a rated load voltage of 24V to 280V AC with zero voltage switching,...
This Harmony SSM solid state modular DIN rail single-phase relay is rated 12A, is controlled with a 4V to 32V DC input, has a rated load voltage of 24V to 280V AC with zero voltage switching, ideal...