Schneider Electric

Schneider Electric STBACI1230K Analog C In 2Ch 0-20Ma Kit Conns,Base

(No reviews yet) Write a Review
SKU:
STBACI1230K
UPC:
3.59586E+12
Condition:
New
Vibration Resistance:
+/-0.35 mm 10-58 Hz || 3 gn 58-150 Hz 35 x 7.5 mm symmetrical DIN rail || 5 gn 58-150 Hz 35 x 15 mm symmetrical DIN rail
Product Or Component Type:
standard analog input kit
Integral Linearity:
+/- 0.1 %FS
Analogue Input Number:
2
[Us] Rated Supply Voltage:
24 V DC
Operating Altitude:
<= 6561.68 ft (2000 m)
Supply:
power distribution module
Pollution Degree:
2 IEC 60664-1
Protection Type:
short-circuit protection
Ambient Air Temperature For Operation:
-25-70 °C
Type Of Filter:
single low pass input filter 25 Hz
Ambient Air Temperature For Storage:
-40-85 °C without derating
Absolute Maximum Input:
25 mA/50 V DC
Ip Degree Of Protection:
IP20 conforming to IEC 61131-2 class 1
Input Impedance:
<= 300 Ohm
Overvoltage Category:
II
Product Certifications:
C-tick || UL || CSA || FM Class 1 Division 2 || ATEX Cat 3G
Temperature Drift:
+/-0.01 %/°C
Marking:
CE
Ambient Air Temperature For Operation:
32...140 °F without derating
Status Led:
1 LED (Green) module status (RDY) || 1 LED (Red) module error (ERR)
Current Consumption:
30 mA 5 V DC logic bus
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Net Weight:
0.116 kg
Analogue Input Type:
current 0...20 mA
Absolute Accuracy Error:
+/- 0.5 % of full scale 25 °C
Product Compatibility:
power distribution module STBPDT3100/3105 || mounting base STBXBA1000
Hot Swapping Fallback:
yes for standard NIMs
Differential Linearity:
monotonic
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Data Format:
EN 61131-2 || IEC 61131-2
Fallback Status:
state 0 basic NIMs || user configurable standard NIMs
Shock Resistance:
30 gn 11 ms IEC 88 reference 2-27
China Rohs Regulation:
X
Addressing Requirement:
4 input words
Height:
13.9 mm
Update Time:
10 ms
Response Time:
5 ms
Rohs Exemption Information:
Yes
Insulation Between Channels And Logic Bus:
1500 V for 1 minute
Insulation Between Channels And Sensor Bus:
30 V
Analogue Input Resolution:
12 bits
Ambient Air Temperature For Storage:
-40...185 °F without derating
Relative Humidity:
95-95 % 60-60 °C without condensation
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Mercury Free:
Yes
Kit Composition:
STBACI1230 module || STBXBA1000 base || STBXTS2100, 6-terminal spring clamp connector || STBXTS1100, 6-terminal screw type connector
Range Of Product:
Modicon STB distributed I/O solution
Cold Swapping:
yes
Maximum Supply Current For Sensors:
100 mA per input channels
Warranty:
18 months
Width:
128.3 mm
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Depth:
70 mm
Catalog:
View
Datasheet:
View
$393.00

Description

This product is part of the Modicon STB range, an offer of modular distributed I/O. This standard analogue input kit is an accessory kit of Programmable Logic Controllers (PLC) and Programmable Automation Controllers (PAC). It has 2 analogue inputs (current 0mA to 20mA) with 12bit resolution. This product is compatible with most major fieldbus networks. It is an analogue input kit with a rated supply voltage of 24V DC and a current consumption of 30mA at 5V DC for logic bus. The response time is 5ms. It supports hot swap fallback, requires standard type network interface module (NIM). It is an IP20 rated product. Its dimensions are 128.3mm (width) x 70mm (depth) x 13.9mm (height) and weighs 0.116kg. It is suitable for packaging, bottling, assembly, distribution, textile, printing and semiconductor machines applications. This product is certified by FM Class 1 Division 2, ATEX category 3G, CE, UL, CSA and C-Tick. This kit is suitable for use with mounting base STBXBA1000 and power distribution module STBPDT3100/3105. The kit includes STBACI1230 module, STBXBA1000 base, STBXTS2100, 6-terminal spring clamp connector and STBXTS1100, 6-terminal screw type connector. The Modicon STB distributed I/O solution is an open, modular input/output system that makes it possible to design automation islands managed by a master controller via a bus or communication network.
View AllClose

Related Products

Related Products