Schneider Electric

Schneider Electric STBACO1210K Analog C Out 2Ch 0-20Ma Kit Conns,Base

(No reviews yet) Write a Review
SKU:
STBACO1210K
UPC:
3595863948776
Condition:
New
Absolute Accuracy Error:
+/- 0.5 % of full scale per °C
Pollution Degree:
2 IEC 60664-1
Product Certifications:
FM Class 1 Division 2 || UL || CSA
Addressing Requirement:
2 output words || 1 word for configuring fallback status
Marking:
CE
Supply:
power distribution module
Vibration Resistance:
3 gn 58-150 Hz 35 x 7.5 mm symmetrical DIN rail || 5 gn 58-150 Hz 35 x 15 mm symmetrical DIN rail || +/-0.35 mm 10-58 Hz
Integral Linearity:
+/- 0.1 %FS
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Kit Composition:
STBXTS1100, 6-terminal screw type connector || STBACO1210 module || STBXBA1000 base || STBXTS2100, 6-terminal spring clamp connector
Data Format:
EN 61131-2 || IEC 61131-2
[Us] Rated Supply Voltage:
24 V DC
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Net Weight:
0.117 kg
Warranty:
18 months
Cold Swapping:
yes
Protection Type:
short-circuit protection
Ambient Air Temperature For Storage:
-40-85 °C without
Analogue Output Number:
2
Range Of Product:
Modicon STB distributed I/O solution
Analogue Output Resolution:
12 bits
Product Or Component Type:
standard analog output kit
Height:
13.9 mm
Ambient Air Temperature For Storage:
-40...185 °F without
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Overvoltage Category:
II
Status Led:
1 LED (Green) module status (RDY) || 1 LED (Red) module error (ERR)
Relative Humidity:
95-95 % 60-60 °C without condensation
Current Consumption:
40 mA 5 V DC logic bus
Rohs Exemption Information:
Yes
Ambient Air Temperature For Operation:
0-60 °C without)
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Shock Resistance:
30 gn 11 ms IEC 88 reference 2-27
Ambient Air Temperature For Operation:
32...140 °F without
Analogue Output Type:
current 0...20 mA
Analogue Output Current:
0.02-0.02 A
Operating Altitude:
<= 6561.68 ft (2000 m)
Differential Linearity:
monotonic
Width:
128.3 mm
Temperature Drift:
+/-0.01 %/°C
Response Time:
3 ms
Mercury Free:
Yes
Conversion Time:
900 ms at +/- 0.1 % of final value
Update Time:
25 ms
Ip Degree Of Protection:
IP20 conforming to IEC 61131-2 class 1
Product Compatibility:
mounting base STBXBA1000 || power distribution module STBPDT3100/3105
Insulation Between Channels And Actuator Bus:
30 V
Fallback Status:
state 0 basic NIMs || user configurable standard NIMs
Hot Swapping Fallback:
yes for standard NIMs
Insulation Between Channels And Logic Bus:
1500 V for 1 minute
China Rohs Regulation:
X
Depth:
70 mm
Catalog:
View
Datasheet:
View
$384.00

Description

This output kit is part of the Modicon STB range, an offer of IP20 modular distributed I/Os on multiple networks and fieldbus. This standard analog output kit is an accessory kit for programmable logic controllers (PLC) and programmable automation controllers (PAC). It has 2 analog output (current 0mA to 20mA) with 12bit plus sign resolution. This product is compatible with most major Fieldbus networks. It is an analog input kit with a rated supply voltage of 24V DC and a current consumption of 40mA at 5V DC for logic bus. It is an IP20 rated product. Its dimensions are 128.3mm (width) x 70mm (depth) x 13.9mm (height). It weighs 0.117kg. It is suitable for packaging, bottling, assembly, distribution, textile, printing and semiconductor machines. This product is certified by CE, FM Class 1 Division 2, CSA and UL. It is compatible with mounting base STBXBA1000 and power distribution module STBPDT3100/3105. The kit includes STBXTS2100, 6-terminal spring clamp connector, STBXBA1000 base, STBACO1210 module and STBXTS1100, 6-terminal screw type connector. Advantys distributed I/O solutions are simple, open and flexible, meeting needs in every stage of the product life cycle. For distributed connection to sensors and actuators from a PLC with prefabricated cables.
View AllClose

Related Products

Related Products