Schneider Electric STBACO8220K Analog C Out 2Ch Hart Kit Conns,Base
Schneider Electric
$1,200.00
(No reviews yet)
Write a Review
Write a Review
Schneider Electric
Schneider Electric STBACO8220K Analog C Out 2Ch Hart Kit Conns,Base
standard analog output HART kit STB - 4..20 mA - 2 O - 15 bits + sign
- Response Time:
- 40 ms plus update time
- Operating Altitude:
- <= 6561.68 ft (2000 m)
- Cold Swapping:
- yes
- Overvoltage Category:
- II
- Product Certifications:
- UL || FM Class 1 Division 2 || CSA
- Mercury Free:
- Yes
- Absolute Accuracy Error:
- +/- 0.3 % of full scale 25 °C
- Relative Humidity:
- 95-95 % 60-60 °C without condensation
- Differential Linearity:
- monotonic
- Height:
- 18.4 mm
- Pollution Degree:
- 2 IEC 60664-1
- Eu Rohs Directive:
- Pro-active compliance (Product out of EU RoHS legal scope)
- Depth:
- 70 mm
- Product Compatibility:
- power distribution module STBPDT3100/3105 || mounting base STBXBA1000
- Insulation Between Channels And Logic Bus:
- 1500 V for 1 minute
- Hot Swapping Fallback:
- yes for standard NIMs
- Vibration Resistance:
- 3 gn 58-150 Hz 35 x 7.5 mm symmetrical DIN rail || 5 gn 58-150 Hz 35 x 15 mm symmetrical DIN rail || +/-0.35 mm 10-58 Hz
- Ambient Air Temperature For Operation:
- 0-60 °C without)
- Status Led:
- 1 LED (Green) module status (RDY) || 1 LED (Red) module error (ERR)
- Supply:
- power distribution module
- [Us] Rated Supply Voltage:
- 24 V DC
- Width:
- 128.3 mm
- Shock Resistance:
- 30 gn 11 ms IEC 88 reference 2-27
- Analogue Output Resolution:
- 15 bits + sign
- Kit Composition:
- STBACO8220 module || STBXBA2000 base || STBXTS2100, 6-terminal spring clamp connector || STBXTS1100, 6-terminal screw type connector
- Rohs Exemption Information:
- Yes
- Data Format:
- EN 61131-2 || IEC 61131-2
- Integral Linearity:
- +/- 0.05 %FS
- Analogue Output Type:
- current 4...20 mA
- Marking:
- CE
- Insulation Between Channels And Actuator Bus:
- 200 V
- Ambient Air Temperature For Operation:
- 32...140 °F without
- Temperature Drift:
- +/-0.005 %/°C
- China Rohs Regulation:
- X
- Analogue Output Current:
- 0.02-0.02 A
- Update Time:
- 8 ms
- Ambient Air Temperature For Storage:
- -40...185 °F without
- Analogue Output Number:
- 2
- Weee:
- The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- Reach Regulation:
- Reference contains Substances of Very High Concern above the threshold
- Fallback Status:
- state 0 basic NIMs || user configurable standard NIMs
- Current Consumption:
- 210 mA 5 V DC logic bus
- Product Or Component Type:
- standard analog output kit
- California Proposition 65:
- WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Range Of Product:
- Modicon STB distributed I/O solution
- Ip Degree Of Protection:
- IP20 conforming to IEC 61131-2 class 1
- Ambient Air Temperature For Storage:
- -40-85 °C without
- Catalog:
- View
- Datasheet:
- View
