Schneider Electric

Schneider Electric STBART0200K Analog In 2Ch Rtd/Tc/Mv Kit Conns,Base

(No reviews yet) Write a Review
SKU:
STBART0200K
UPC:
3.59586E+12
Condition:
New
Shock Resistance:
30 gn 11 ms IEC 88 reference 2-27
Absolute Maximum Input:
+/- 7.5 V DC
Conversion Time:
150 ms voltage 60 Hz || 170 ms voltage 50 Hz || 180 ms temperature probe 60 Hz 2 or 4 wires || 200 ms temperature probe 50 Hz 2 or 4 wires || 210 ms thermocouple with internal cold-junction compensation 60 Hz || 230 ms thermocouple with internal cold
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Analogue Input Type:
voltage +/- 80 mV || temperature probe -100...+260 °C Cu 10 2, 3 or 4 wires IEC || temperature probe -100...+450 °C Pt 100 2, 3 or 4 wires US/JIS || temperature probe -100...+450 °C Pt 1000 2, 3 or 4 wires US/JIS || temperature probe -200...+850 Â
China Rohs Regulation:
X
Input Impedance:
10 MOhm +/- 80 mV
Warranty:
18 months
Measurement Resolution:
0.01 mV voltage || 0.1 °C or 0.1 °F temperature probe || 0.1 °C or 0.1 °F thermocouple
Product Compatibility:
mounting base STBXBA1000 || power distribution module STBPDT3100/3105
Type Of Filter:
single low pass input filter 25 Hz
Absolute Accuracy Error:
+/- 0.1 % of full scale 25 °C internal || +/- 0.15 % of full scale 25 °C external
Analogue Input Resolution:
15 bits + sign
Ambient Air Temperature For Operation:
0-70 °C
Range Of Product:
Modicon STB distributed I/O solution
Mercury Free:
Yes
Operating Altitude:
<= 6561.68 ft (2000 m)
Fallback Status:
state 0 basic NIMs || user configurable standard NIMs
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Cold Swapping:
yes
Status Led:
1 LED (Green) module status (RDY) || 1 LED (Red) module error (ERR)
Hot Swapping Fallback:
yes for standard NIMs
Maximum Supply Current For Sensors:
100 mA per input channels
Data Format:
EN 61131-2 || IEC 61131-2
Measurement Accuracy:
+/- 1 °C Ni 100 25 °C external || +/- 1 °C Ni 100 25 °C internal || +/- 1 °C Ni 1000 25 °C external || +/- 1 °C Ni 1000 25 °C internal || +/- 1 °C Pt 100 25 °C internal || +/- 1 °C Pt 1000 25 °C internal || +/- 1.75 °C thermocouple B wit
Ambient Air Temperature For Storage:
-40...185 °F without derating
Pollution Degree:
2 IEC 60664-1
Overvoltage Category:
II
Product Or Component Type:
standard analog input kit
Ambient Air Temperature For Operation:
32...140 °F without derating
Addressing Requirement:
1 word for cold-junction compensation || 2 input words
Kit Composition:
STBART0200 module || STBXTS1100, 6-terminal screw type connector || STBXBA1000 base || STBXTS2100, 6-terminal spring clamp connector
[Us] Rated Supply Voltage:
24 V DC
Rohs Exemption Information:
Yes
Insulation Between Channels And Logic Bus:
1500 V for 1 minute
Ip Degree Of Protection:
IP20 conforming to IEC 61131-2 class 1
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Relative Humidity:
95-95 % 60-60 °C without condensation
Ambient Air Temperature For Storage:
-40-85 °C without derating
Vibration Resistance:
+/-0.35 mm 10-58 Hz || 3 gn 58-150 Hz 35 x 7.5 mm symmetrical DIN rail || 5 gn 58-150 Hz 35 x 15 mm symmetrical DIN rail
Protection Type:
short-circuit protection
Maximum Wiring Resistance:
20 Ohm Cu 10 IEC/US/JIS 2 or 3 wires || 20 Ohm Ni 100 IEC/US/JIS 2 or 3 wires || 20 Ohm Pt 100 IEC/US/JIS 2 or 3 wires || 200 Ohm Ni 1000 IEC/US/JIS 2 or 3 wires || 200 Ohm Pt 1000 IEC/US/JIS 2 or 3 wires || 50 Ohm Cu 10 IEC/US/JIS 4 wires || 50 Ohm
Supply:
power distribution module
Product Certifications:
UL || FM Class 1 Division 2 || CSA || ATEX Cat 3G || C-tick
Current Consumption:
30 mA 5 V DC logic bus
Analogue Input Number:
2
Marking:
CE
Catalog:
View
Datasheet:
View
$419.00

Description

This product is part of the Modicon STB range, an offer of modular distributed I/O. This standard analogue input kit is an accessory kit of Programmable Logic Controllers (PLC) and Programmable Automation Controllers (PAC). It has 2 analogue inputs with 15bit plus sign resolution. This product is compatible with most major fieldbus networks. It is an analogue input kit with a rated supply voltage of 24V DC and a current consumption of 30mA at 5V DC for logic bus. It is an IP20 rated product. It is suitable for packaging, bottling, assembly, distribution, textile, printing and semiconductor machines applications. This product is certified by FM Class 1 Division 2, ATEX category 3G, CE, UL, CSA and C-Tick. This kit is suitable for use with mounting base STBXBA1000 and power distribution module STBPDT3100/3105. The kit includes STBART0200 module, STBXTS1100, 6-terminal screw type connector, STBXBA1000 base and STBXTS2100, 6-terminal spring clamp connector. The Modicon STB distributed I/O solution is an open, modular input/output system that makes it possible to design automation islands managed by a master controller via a bus or communication network.
View AllClose

Related Products

Related Products