Schneider Electric STBAVI1270K Analog -/+10V In 2Ch Kit
SKU:
STBAVI1270K
UPC:
3595863988918
MPN:
Condition:
New
Insulation Between Channels And Logic Bus:
1500 V for 1 minute
Range Of Product:
Modicon STB distributed I/O solution
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Marking:
CE
Product Or Component Type:
standard analog input kit
Mercury Free:
Yes
Type Of Filter:
single low pass input filter 25 Hz
Ambient Air Temperature For Operation:
0-60 °C
Ambient Air Temperature For Storage:
-40-85 °C without derating
Vibration Resistance:
+/-0.35 mm 10-58 Hz || 3 gn 58-150 Hz 35 x 7.5 mm symmetrical DIN rail || 5 gn 58-150 Hz 35 x 15 mm symmetrical DIN rail
Product Certifications:
CSA || C-tick || UL || ATEX Cat 3G || FM Class 1 Division 2
Protection Type:
short-circuit protection
Maximum Source Impedance:
1 kOhm
Net Weight:
0.115 kg
Hot Swapping Fallback:
yes for standard NIMs
Response Time:
5 ms
Differential Linearity:
monotonic
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Addressing Requirement:
4 input words
Supply:
power distribution module
Maximum Supply Current For Sensors:
100 mA per input channels
Absolute Maximum Input:
50 V DC
Product Compatibility:
mounting base STBXBA1000 || power distribution module STBPDT3100/3105
Relative Humidity:
95-95 % 60-60 °C without condensation
Shock Resistance:
30 gn 11 ms IEC 88 reference 2-27
Analogue Input Number:
2
Status Led:
1 LED (Green) module status (RDY) || 1 LED (Red) module error (ERR)
Fallback Status:
state 0 basic NIMs || user configurable standard NIMs
Pollution Degree:
2 IEC 60664-1
Ambient Air Temperature For Storage:
-40...185 °F without derating
Overvoltage Category:
II
[Us] Rated Supply Voltage:
24 V DC
Current Consumption:
30 mA 5 V DC logic bus
Operating Altitude:
<= 6561.68 ft (2000 m)
Integral Linearity:
+/- 0.2 %FS
Insulation Between Channels And Sensor Bus:
30 V
Ip Degree Of Protection:
IP20 conforming to IEC 61131-2 class 1
Update Time:
10 ms
Rohs Exemption Information:
Yes
Absolute Accuracy Error:
+/- 0.5 % of full scale 25 °C
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Analogue Input Resolution:
11 bits + sign
Temperature Drift:
+/-0.01 %/°C
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Kit Composition:
STBXBA1000 base || STBXTS1100, 6-terminal screw type connector || STBAVI1270 module || STBXTS2100, 6-terminal spring clamp connector
This product is part of the Modicon STB range, an offer of modular distributed I/O. This standard analogue output kit has 2 analogue outputs with 11bit + sign and 12bit output resolution. It is an...
This product is part of the Modicon STB range, an offer of modular distributed I/O. This standard analogue output kit has 2 analogue outputs with 15bit + sign resolution. It is an analogue output kit...
This product is part of the Modicon STB range, an offer of modular distributed I/O. This basic analogue input kit is an accessory kit of Programmable Logic Controllers (PLC) and Programmable...
