Schneider Electric STBDAI5230K 115Vac In 2Pt Kit Conns,
SKU:
STBDAI5230K
UPC:
3595863989427
MPN:
Condition:
New
Input Voltage Limits:
0...20 V at state 0 || 74...132 V at state 1
Shock Resistance:
30 gn 11 ms IEC 88 reference 2-27
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Discrete Input Number:
2
Range Of Product:
Modicon STB distributed I/O solution
Depth:
65.1 mm
Net Weight:
0.12 kg
Network Frequency Limits:
47-63 Hz
Absolute Maximum Voltage:
200 V 20 ms
Standards:
EN/IEC 61131-2 type 1
Rohs Exemption Information:
Yes
Status Led:
1 LED (Green) module status (RDY) || 1 LED per channel (Green) channel status (IN1 to IN2) || 1 LED (Red) module error (ERR)
Current Consumption:
40 mA 5 V DC logic bus
Pollution Degree:
2 IEC 60664-1
Insulation Between Channels And Logic Bus:
1780 V for 1 minute
Product Or Component Type:
standard digital input kit
Response Time:
1.5 ms off-to-on || 1.5 ms on-to-off
Relative Humidity:
95-95 % 60-60 °C without condensation
Warranty:
18 months
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Hot Swapping Fallback:
yes for standard NIMs
Vibration Resistance:
3 gn 58-150 Hz 35 x 7.5 mm symmetrical DIN rail || 5 gn 58-150 Hz 35 x 15 mm symmetrical DIN rail || +/-0.35 mm 10-58 Hz
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Ambient Air Temperature For Operation:
32...140 °F without derating
Current State 0 Guaranteed:
<= 2 mA
Height:
18.4 mm
Overvoltage Category:
II
Network Frequency:
50/60 Hz
Supply:
power distribution module
Width:
125 mm
Cold Swapping:
yes
Kit Composition:
STBXTS2110, 5-terminal spring clamp connector || STBXBA2000 base || STBXTS1110, 5-terminal screw type connector || STBDAI5230 module
Current Supplied By Sensor:
<= 60 mA per channel
Product Compatibility:
I/O base STBXBA2000 || power distribution module STBPDT2100/2105
Permissible Voltage:
132 V
Mercury Free:
Yes
Ambient Air Temperature For Storage:
-40-85 °C without derating
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Protection Type:
power protection integrated fuse on PDM time lag 10 A || input protection resistor-limited
This product is part of the Modicon STB range, an offer of modular distributed I/O. This standard discrete output kit has 2 discrete outputs, 2 normally open/normally contacts with solid state relay...
