Schneider Electric STBDDI3615K 24Vdc In 6Pt Basic Kit Conns,Base
SKU:
STBDDI3615K
UPC:
3.59586E+12
MPN:
Condition:
New
Height:
18.4 mm
China Rohs Regulation:
X
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Ambient Air Temperature For Storage:
-40...185 °F without derating
Mercury Free:
Yes
Permissible Voltage:
30 V
Rohs Exemption Information:
Yes
Discrete Input Number:
6
Operating Altitude:
<= 6561.68 ft (2000 m)
Current Consumption:
45 mA 5 V DC logic bus
Ip Degree Of Protection:
IP20 conforming to IEC 61131-2 class 1
Discrete Input Voltage Type:
DC
Kit Composition:
STBXTS1100, 6-terminal screw type connector || STBDDI3615 module || STBXBA1000 base || STBXTS2100, 6-terminal spring clamp connector
Ambient Air Temperature For Operation:
32...140 °F without derating
Discrete Input Logic:
positive
Product Certifications:
UL || FM Class 1 Division 2 || CSA
Current State 0 Guaranteed:
<= 0.5 mA
Product Compatibility:
power distribution module STBPDT3100/3105 || I/O base STBXBA1000
Ambient Air Temperature For Storage:
-40-85 °C without derating
Marking:
CE
Standards:
EN/IEC 61131-2 type 1
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Product Or Component Type:
basic digital input kit
Hot Swapping Fallback:
yes for basic NIMs
Relative Humidity:
95-95 % 60-60 °C without condensation
[Us] Rated Supply Voltage:
24 V DC
Vibration Resistance:
3 gn 58-150 Hz 35 x 7.5 mm symmetrical DIN rail || 5 gn 58-150 Hz 35 x 15 mm symmetrical DIN rail || +/-0.35 mm 10-58 Hz
Net Weight:
0.112 kg
Insulation Between Channels And Logic Bus:
1500 V for 1 minute
Cold Swapping:
yes
Pollution Degree:
2 IEC 60664-1
Absolute Maximum Voltage:
56 V 1.3 ms
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Input Voltage Limits:
15...30 V at state 1 || -3...5 V at state 0
Status Led:
1 LED (Green) module status (RDY) || 1 LED per channel (Green) channel status (IN1 to IN6)
Discrete Input Voltage:
24 V
Discrete Input Current:
4.5 mA
Ambient Air Temperature For Operation:
0-60 °C without derating)
Supply:
power distribution module
Current State 1 Guaranteed:
>= 2.5 mA
Range Of Product:
Modicon STB distributed I/O solution
Shock Resistance:
30 gn 11 ms IEC 88 reference 2-27
Warranty:
18 months
Overvoltage Category:
II
Width:
125 mm
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Depth:
65.1 mm
Response Time:
5.25 ms off-to-on || 5.75 ms on-to-off
Input Filtering:
5 ms
Protection Type:
power protection integrated fuse on PDM time lag 5 A || input protection resistor-limited || reverse polarity protection
This product is part of the Modicon STB range, an offer of modular distributed I/O. This standard discrete output kit has 6 discrete outputs with solid state relay. It is a discrete output kit with a...
This product is part of the Modicon STB range, an offer of modular distributed I/O. This standard discrete input kit has 6 discrete inputs with positive or negative logic. It is a discrete input kit...
This product is part of the Modicon STB range, an offer of modular distributed I/O. This standard power distribution kit supports hot swapping illegal fallback. This product is compatible with most...
