Schneider Electric TM221C40R Controller M221-40Io Relay Compact

(No reviews yet) Write a Review
SKU:
TM221C40R
UPC:
3606480648731
Condition:
New
Electromagnetic Emission:
conducted emissions 79 dBμV/m QP/66 dBμV/m AV power lines (AC))0.15-0.5 MHz IEC 55011 || conducted emissions 73 dBμV/m QP/60 dBμV/m AV power lines (AC))0.5-300 MHz IEC 55011 || conducted emissions 120...69 dBµV/m QP power lines)10-150 kHz IEC 55
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Analogue Input Resolution:
10 bits
Voltage State 0 Guaranteed:
<= 5 V input
Discrete Input Number:
24 , discrete input IEC 61131-2 Type 1
Pvc Free:
Yes
Realtime Clock:
with
Resistance To Conducted Disturbances:
10 V 0.15...80 MHz IEC 61000-4-6 || 3 V 0.1...80 MHz Marine specification (LR, ABS, DNV, GL) || 10 V spot frequency (2, 3, 4, 6.2, 8.2, 12.6, 16.5, 18.8, 22, 25 MHz) Marine specification (LR, ABS, DNV, GL)
Configurable Filtering Time:
0 ms input || 3 ms input || 12 ms input
Product Or Component Type:
logic controller
Discrete Output Type:
relay normally open
Permitted Overload On Inputs:
+/- 30 V DC 5 min maximum)analog input || +/- 13 V DC permanent)analog input
Network Frequency:
50/60 Hz
Minimum Load:
1 mA 5 V DC relay output
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Shock Resistance:
98 m/s² 11 ms
Height:
90 mm
Inrush Current:
40 A
Relative Humidity:
10-95 %, without condensation in operation) || 10-95 %, without condensation in storage)
Communication Port Protocol:
USB port USB - SoMachine-Network || non isolated serial link Modbus master/slave - RTU/ASCII or SoMachine-Network
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Backup Time:
1 year 25 °C by interruption of power supply)
Data Backed Up:
256 kB built-in flash memory backup of application and data
Ambient Air Temperature For Storage:
-25-70 °C
Circularity Profile:
ENVEOLI1403012EN
Power Supply Output Current:
0.52-0.52 A 5 V expansion bus || 0.24-0.24 A 24 V expansion bus
Conversion Time:
1 ms per channel + 1 controller cycle time analog input
Resistance To Electrostatic Discharge:
8 kV in air IEC 61000-4-2 || 4 kV on contact IEC 61000-4-2
China Rohs Regulation:
X
Mercury Free:
Yes
Battery Type:
BR2032 or CR2032X lithium non-rechargeable
Pollution Degree:
<= 2
Exct Time For Event Task:
60 µs response time
Discrete Input Current:
7 mA discrete input || 5 mA fast input
Discrete Input Voltage Type:
DC
Execution Time Per Instruction:
0.2 µs Boolean
Execution Time For 1 Kinstruction:
0.3 ms event and periodic task
Discrete Output Number:
16 relay
Maximum Number Of I/O Expansion Module:
7 (local I/O-Architecture) || 14 (remote I/O-Architecture)
Discrete Output Current:
0.0833333333333333
Data Storage Equipment:
2 GB SD card optional)
Sensor Power Supply:
24-24 V DC 250 mA supplied by the controller
Maximum Cable Distance Between Devices:
shielded cable <10 m fast input || unshielded cable <30 m output || unshielded cable <30 m digital input || unshielded cable <1 m analog input
Surge Withstand:
2 kV power lines (AC) common mode IEC 61000-4-5 || 2 kV relay output common mode IEC 61000-4-5 || 1 kV I/O common mode IEC 61000-4-5 || 1 kV shielded cable common mode IEC 61000-4-5 || 0.5 kV power lines (DC) differential mode IEC 61000-4-5 || 1 kV p
Integrated Connection Type:
USB port mini B USB 2.0 || non isolated serial link serial 1 RJ45 RS485 || non isolated serial link serial 2 RJ45 RS232/RS485
Absolute Accuracy Error:
+/- 1 % of full scale analog input
Analogue Input Number:
2 0...10 V
Clock Drift:
<= 30 s/month 25-25 °C
Discrete Input Logic:
sink or source (positive/negative)
Mechanical Durability:
20000000 cycles relay output
Input Impedance:
3.4 kOhm discrete input || 100 kOhm analog input || 4.9 kOhm fast input
Environmental Characteristic:
ordinary and hazardous location
Product Certifications:
RCM || LR || cULus || DNV-GL || ABS || EAC || CE || UKCA || cULus HazLoc
Immunity To Microbreaks:
10 ms
Reset Time:
1 s
Supply Voltage Limits:
85-264 V
Range Of Product:
Modicon M221
Switching Frequency:
20 switching operations/minute with maximum load
Discrete I/O Number:
40
Insulation:
between input and internal logic 500 V AC || non-insulated between analogue input and internal logic || non-insulated between analogue inputs || between supply and ground 1500 V AC || between sensor power supply and ground 500 V AC || between input a
Depth:
70 mm
Memory Capacity:
256 kB user application and data RAM 10000 instructions || 256 kB internal variables RAM
Counting Input Number:
4 fast input (HSC mode) 100 kHz 32 bits
Environmental Disclosure:
ENVPEP1403012EN
Electrical Durability:
100000 cycles AC-12, 120 V, 240 VA, resistive || 100000 cycles AC-12, 240 V, 480 VA, resistive || 300000 cycles AC-12, 120 V, 80 VA, resistive || 300000 cycles AC-12, 240 V, 160 VA, resistive || 100000 cycles AC-15, cos phi = 0.35 , 120 V, 60 VA, ind
Maximum Power Consumption In Va:
67 VA 100...240 V with max number of I/O expansion module || 37 VA 100...240 V without I/O expansion module
Ambient Air Temperature For Operation:
-10-55 °C horizontal installation) || -10-35 °C vertical installation)
Maximum Current Per Output Common:
0.291666666666667
Ip Degree Of Protection:
IP20 with protective cover in place
Mounting Support:
top hat type TH35-15 rail IEC 60715 || top hat type TH35-7.5 rail IEC 60715 || plate or panel with fixing kit
Marking:
CE
[Us] Rated Supply Voltage:
100...240 V AC
Standards:
IEC 61131-2 || UL 508 || CAN/CSA C22.2 No. 213 || IACS E10 || ANSI/ISA 12-12-01
Rohs Exemption Information:
Yes
Operating Altitude:
0...6561.68 ft (0...2000 m)
Lsb Value:
10 mV
Width:
160 mm
Regulation Loop:
adjustable PID regulator up to 14 simultaneous loops
Electrical Connection:
removable screw terminal block for inputs || removable screw terminal block for outputs || terminal block, 3 for connecting the 24 V DC power supply || connector, 4 for analogue inputs || mini B USB 2.0 connector for a programming terminal
Discrete Output Voltage:
5...125 V DC || 5...250 V AC
Resistance To Electromagnetic Fields:
10 V/m 80 MHz...1 GHz IEC 61000-4-3 || 3 V/m 1.4 GHz...2 GHz IEC 61000-4-3 || 1 V/m 2...2.7 GHz IEC 61000-4-3
Vibration Resistance:
3.5 mm 5-8.4 Hz symmetrical rail || 3.5 mm 5-8.4 Hz panel mounting || 1 gn 8.4-150 Hz symmetrical rail || 1 gn 8.4-150 Hz panel mounting
Resistance To Magnetic Fields:
30 A/m 50/60 Hz IEC 61000-4-8
Protection Type:
without protection 5 A
Transmission Rate:
1.2...115.2 kbit/s (115.2 kbit/s by default) 15-15 m RS485 || 1.2...115.2 kbit/s (115.2 kbit/s by default) 3-3 m RS232 || 480 Mbit/s USB
Net Weight:
0.456 kg
Discrete Input Voltage:
24 V
Control Signal Type:
single phase || pulse/direction || A/B
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Sustainable Offer Status:
Green Premium product
Supply:
serial)serial link supply 5 V, <200 mA
Storage Altitude:
0-3000 m
Local Signalling:
for PWR 1 LED (green) || for RUN 1 LED (green) || for module error (ERR) 1 LED (red) || for SD card access (SD) 1 LED (green) || for BAT 1 LED (red) || for SL1 1 LED (green) || for SL2 1 LED (green) || for I/O state 1 LED per channel (green)
Voltage State 1 Guaranteed:
>= 15 V input
Resistance To Fast Transients:
2 kV IEC 61000-4-4 power lines) || 2 kV IEC 61000-4-4 relay output) || 1 kV IEC 61000-4-4 I/O) || 1 kV IEC 61000-4-4 Ethernet line) || 1 kV IEC 61000-4-4 serial link)
Response Time:
35 µs turn-off, I2...I5 input || 10 ms turn-on output || 10 ms turn-off output || 5 µs turn-on, I0, I1, I6, I7 fast input || 35 µs turn-on, other terminals input || 5 µs turn-off, I0, I1, I6, I7 fast input || 100 µs turn-off, other terminals inp
Maximum Size Of Object Areas:
512 %M memory bits || 512 %KW constant words || 8000 %MW memory words || 255 %C counters || 255 %TM timers
Output Voltage Limits:
125 V DC || 277 V AC
Catalog:
View
Datasheet:
View
$461.25

Description

This product is part of the Modicon M221 range, an offer of programmable logic controllers for hardwired architectures. This logic controller provides 24 discrete inputs and 16 relay outputs with 10bit input resolution, normally opened relay output. It is a Modicon logic controller with a rated supply voltage of 100V to 240V AC, an output voltage of 5V to 125V DC, 5V to 250V AC and an output current of 2A with sink or source input logic. This product requires minimal installation and offers tremendous versatility. Integrated connections are USB port with mini B USB 2.0 connector, non isolated serial link serial 1 with RJ45 connector and RS485 interface and non isolated serial link serial 2 with RJ45 connector and RS232/RS485 interface. It is a Modicon M221 controller with a network frequency of 50/60Hz, 256KB for internal variables RAM, user application and data RAM, a built-in flash memory of 256KB and a SD card memory capacity of 2GB. It is an IP20 rated product. Its dimensions are 160mm (Width) x 70mm (Depth) x 90mm (Height). It weighs 0.456kg. This product is certified by CE, IACS E10, RCM, ABS, LR, DNV-GL, CSA, EAC and CULus. It meets EN/IEC 60664-1, EN/IEC 61131-2 and EN/IEC 61010-2-201 standards. It supports DIN rail mount. Achieve benchmark performance while increasing profitability with the Modicon M221 through intuitive machine programming with SoMachine Basic, ready-to-use applications and function blocks
View AllClose