Schneider Electric TM5SAI2H Mod. 2Ai 10V/0-20Ma 16 Bits

(No reviews yet) Write a Review
SKU:
TM5SAI2H
UPC:
3595864074726
Condition:
New
Standards:
CSA C22.2 No 142 || IEC 61131-2 || UL 508 || CSA C22.2 No 213
Product Compatibility:
logic controller || motion controller
Net Weight:
0.025 kg
Product Or Component Type:
analog input module
Sampling Duration:
50 µs
Operating Altitude:
0...6561.68 ft (0...2000 m)
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Isolation:
500 Vrms AC insulation between channel and bus || no insulation between channels
Input Impedance:
>= 20 mOhm voltage
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Pvc Free:
Yes
Toxic Heavy Metal Free:
Yes
Vibration Resistance:
1 gn 8.4-150 Hz DIN rail || 3.5 mm 5-8.4 Hz DIN rail
Shock Resistance:
15 gn 11 ms
Ambient Air Temperature For Operation:
0-55 °C without derating horizontal installation) || 0-60 °C with derating factor horizontal installation) || 0-50 °C vertical installation)
Maximum Power Dissipation In W:
1.21 W
Warranty:
18 months
Pollution Degree:
2 IEC 60664
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Surge Withstand:
0.5 kV differential mode IEC 61000-4-5 || 1 kV common mode IEC 61000-4-5
Common Mode Rejection:
> 70 dB
Storage Altitude:
0-3000 m
China Rohs Regulation:
X
Disturbance Radiated/Conducted:
CISPR 11
Relative Humidity:
5-95 % without condensation
Electromagnetic Compatibility:
EN/IEC 61000-4-6
Analogue Input Number:
2
Load Impedance Ohmic:
<= 400 Ohm current)
Ambient Air Temperature For Storage:
-25-70 °C
Reach Free Of Svhc:
Yes
Measurement Resolution:
305 µV, +/- 10 V || 610 nA, 0...20 mA
Supply:
internal
Reach Regulation:
Free of Substances of Very High Concern above the threshold
Product Certifications:
C-tick || GOST-R || cULus || CSA
Type Of Cable:
shielded cable
Range Compatibility:
Modicon LMC058 || Modicon M258
Current Consumption:
2 mA 5 V DC bus || 50 mA 24 V DC input/output
Analogue Input Type:
current 0...20 mA differential || voltage +/- 10 V differential
Ip Degree Of Protection:
IP20IEC 61131-2
Sustainable Offer Status:
Green Premium product
Color:
White
Mercury Free:
Yes
Local Signalling:
1 LED green power supply || 1 LED red power supply || 2 LEDs green input status
Environmental Disclosure:
ENVPEP1511026EN
Rohs Exemption Information:
Yes
Range Of Product:
Modicon TM5
Circularity Profile:
ENVEOLI1511026EN
Analogue Input Resolution:
15 bits + sign +/- 10 V || 15 bits 0...20 mA
Resistance To Electromagnetic Fields:
1 V/m 2...2.7 GHz IEC 61000-4-3 || 10 V/m 80...2000 MHz IEC 61000-4-3
Marking:
CE
Resistance To Fast Transients:
1 kV IEC 61000-4-4 I/O) || 1 kV IEC 61000-4-4 shielded cable) || 2 kV IEC 61000-4-4 power lines)
Measurement Error:
< 0.08 % of full scale +/- 10 V +/- 10 V 25 °C || < 0.08 % of full scale 0...20 mA 0...20 mA 25 °C
Resistance To Electrostatic Discharge:
4 kV on contact IEC 61000-4-2 || 8 kV in air IEC 61000-4-2
Temperature Coefficient:
0.01 %FS/°C
Non-Linearity:
< 0.01 %FS voltage || < 0.015 %FS current
[Us] Rated Supply Voltage:
24 V DC -15...20 %
$640.00

Description

This product is part of the Modicon TM5 range, an High-Performance and Safe IP20 Modular I/O System. The analogue input module provides 2 inputs with 16bit resolution. It is an input module with a rated supply voltage of 24V DC and a current consumption of 2mA at 5V DC bus, 33mA at 24V DC input/output. This product is part of a flexible and scalable I/O configuration for automation solutions. There is an insulation between channel and bus at 500Vrms AC and no insulation between channels. The input voltage is ±10V and input current is 0mA to 20mA differential with internal supply. It is an IP20 rated product. It weighs 0.025kg. The Modicon TM5 meets the typical requirements of production and packaging machinery, as well as material handling and assembly systems. This product is certified by GOST-R, C-Tick, cULus and CSA. It meets IEC 61131-2, UL 508, CSA C22.2 No 213 and CSA C22.2 No 142 standards. This product is compatible with Modicon LMC058 motion controller and Modicon M258 logic controller. It is installed by mounting on a 35mm DIN rail. This modular IO system provides a flexible and scalable configuration of remote or distributed IO islands by connection with Modicon and PacDrive 3 controllers. Flexible and scalable, designed for complex machines.
View AllClose