Schneider Electric XPSCM1144 Photocell Type 2 Safety M

(No reviews yet) Write a Review
SKU:
XPSCM1144
UPC:
3.38911E+12
Condition:
New
Number Of Inputs:
2 MA, MB)muting function || 4 Z1, Z2, Z3, Z4)sensor
Warranty:
18 months
Sensor Power Supply:
U+, U- 24-24 V DC
Safety Reliability Data:
MTTFd = 16.6 years EN/ISO 13849-1 || DC = 95.5 % EN/ISO 13849-1 || PFH = 3.12E-7 1/h EN/IEC 61508 || PFHd = 3.12E-7 1/h EN/IEC 62061
Synchronisation Time Between Inputs:
3 s +/- 20 %) for the activation of the MA/MB muting signal
China Rohs Regulation:
X
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Input Voltage:
24 V DCsensor || 24 V DC U+, U-)muting function
Safety Module Application:
for monitoring of single beam photo-electric sensor
Input Current:
200 mA muting function
Ambient Air Temperature For Storage:
-25-85 °C
Output Thermal Current:
5.6 A per relay || 11 A maximum
Muting Maximum Duration:
60 s - 10...30 %)
Protection Type:
electronic internal fuse
Safety Level:
can reach category 2 with the appropriate control system and correctly wired EN/ISO 13849-1 || can reach SILCL 1 with the appropriate control system and correctly wired EN/IEC 62061 || can reach PL = c with the appropriate control system and correctl
Associated Fuse Rating:
4 A gG relay output DIN VDE 0660 part 200 || 4 A gG relay output EN/IEC 60947-5-1 || 6 A fast blow relay output DIN VDE 0660 part 200 || 6 A fast blow relay output EN/IEC 60947-5-1
Mercury Free:
Yes
Input Compatibility:
XC limit switch muting function || XU2M18PP340... muting function || XU2S18PP340... (infrared) sensor || XU9M18PP340... muting function
Safety Module Name:
XPSCM
Environmental Disclosure:
ENVPEP1406024EN
Breaking Capacity:
180 VA holding AC-15 C300 relay output || 1800 VA inrush AC-15 C300 relay output
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Number Of Additional Circuits:
0
Range Of Product:
Telemecanique Safety light curtains XUSL
[Us] Rated Supply Voltage:
24 V DC - 20...20 %
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Rohs Exemption Information:
Yes
Local Signalling:
1 LED electronic internal fuse status || 1 LED restarting || 1 LED safety outputs closed || 1 LED safety outputs open || 1 incandescent lamp muting 4-6.5 W
Power Consumption In W:
15 W
Maximum Line Resistance:
10 Ohm sensor power supply
Maximum Response Time On Input Open:
25 ms
Minimum Output Current:
10 mA relay output
[Uimp] Rated Impulse Withstand Voltage:
4 kV III DIN VDE 0110 parts 1 and 2 || 4 kV III EN/IEC 60947-5-1
Connections - Terminals:
captive screw clamp terminals, 1 x 0.14...1 x 2.5 mm² solid or flexible without cable end || captive screw clamp terminals, 1 x 0.25...1 x 1.5 mm² flexible with cable end, with bezel || captive screw clamp terminals, 1 x 0.25...1 x 2.5 mm² flexibl
Function Of Module:
built-in muting
Ip Degree Of Protection:
IP20 IEC 60529 terminals) || IP40 IEC 60529 enclosure)
Maximum Supply Current For Sensors:
200 mA
Circularity Profile:
ENVEOLI1406024EN
Pvc Free:
Yes
Output Type:
relay 2 NO 13-14, 23-24), volt-free
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Product Or Component Type:
safety module
Breaking Capacity:
20 mA 24 V solid state output || 1.5 A 24 V DC-13)50 ms relay output
[Ui] Rated Insulation Voltage:
300 V 2)DIN VDE 0110 parts 1 and 2 || 300 V 2)EN/IEC 60947-5-1
Sustainable Offer Status:
Green Premium product
Ambient Air Temperature For Operation:
-10-55 °C
Minimum Output Voltage:
17 V relay output
Catalog:
View
Datasheet:
View
  • Schneider Electric XPSCM1144 Photocell Type 2 Safety M
  • Schneider Electric XPSCM1144 Photocell Type 2 Safety M
$690.00

Description

This XPSCM safety module is for monitoring of single-beam photo-electric sensors and has a built-in "muting" function. It meets the requirements of PL c/Category 2 conforming to EN/ISO 13849-1.and SILCL1 conforming to EN/IEC 61508 and EN/IEC 62061. Used in conjunction with XU2S single-beam photo-electric sensors (periodically tested), it establishes a category 2 light curtain conforming to IEC/EN 61496 parts 1 and 2.
View AllClose