Schneider Electric XPSCM1144P Photocell Type 2 Safety M

(No reviews yet) Write a Review
SKU:
XPSCM1144P
UPC:
3.38911E+12
Condition:
New
Sustainable Offer Status:
Green Premium product
[Us] Rated Supply Voltage:
24 V DC - 20...20 %
Pvc Free:
Yes
Safety Module Application:
for monitoring of single beam photo-electric sensor
Minimum Output Current:
10 mA relay output
Minimum Output Voltage:
17 V relay output
Ambient Air Temperature For Storage:
-25-85 °C
Output Thermal Current:
5.6 A per relay || 11 A maximum
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Input Voltage:
24 V DCsensor || 24 V DC U+, U-)muting function
Input Current:
200 mA muting function
Safety Module Name:
XPSCM
Connections - Terminals:
captive screw clamp terminals, removable terminal block, 1 x 0.2...1 x 2.5 mm² solid or flexible without cable end || captive screw clamp terminals, removable terminal block, 1 x 0.25...1 x 2.5 mm² flexible with cable end, with bezel || captive scr
Muting Maximum Duration:
60 s - 10...30 %)
Local Signalling:
1 LED electronic internal fuse status || 1 LED restarting || 1 LED safety outputs closed || 1 LED safety outputs open || 1 incandescent lamp muting 4-6.5 W
Function Of Module:
built-in muting
Output Type:
relay 2 NO 13-14, 23-24), volt-free
Range Of Product:
Telemecanique Safety light curtains XUSL
Maximum Supply Current For Sensors:
200 mA
Maximum Response Time On Input Open:
25 ms
Environmental Disclosure:
ENVPEP1406024EN
Product Or Component Type:
safety module
Ip Degree Of Protection:
IP20 IEC 60529 terminals) || IP40 IEC 60529 enclosure)
Warranty:
18 months
Safety Level:
can reach category 2 with the appropriate control system and correctly wired EN/ISO 13849-1 || can reach SILCL 1 with the appropriate control system and correctly wired EN/IEC 62061 || can reach PL = c with the appropriate control system and correctl
Number Of Additional Circuits:
0
Safety Reliability Data:
MTTFd = 16.6 years EN/ISO 13849-1 || DC = 95.5 % EN/ISO 13849-1 || PFH = 3.12E-7 1/h EN/IEC 61508 || PFHd = 3.12E-7 1/h EN/IEC 62061
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Associated Fuse Rating:
4 A gG relay output DIN VDE 0660 part 200 || 4 A gG relay output EN/IEC 60947-5-1 || 6 A fast blow relay output DIN VDE 0660 part 200 || 6 A fast blow relay output EN/IEC 60947-5-1
Protection Type:
electronic internal fuse
Breaking Capacity:
180 VA holding AC-15 C300 relay output || 1800 VA inrush AC-15 C300 relay output
Number Of Inputs:
2 MA, MB)muting function || 4 Z1, Z2, Z3, Z4)sensor
Synchronisation Time Between Inputs:
3 s +/- 20 %) for the activation of the MA/MB muting signal
[Ui] Rated Insulation Voltage:
300 V 2)DIN VDE 0110 parts 1 and 2 || 300 V 2)EN/IEC 60947-5-1
[Uimp] Rated Impulse Withstand Voltage:
4 kV III DIN VDE 0110 parts 1 and 2 || 4 kV III EN/IEC 60947-5-1
Power Consumption In W:
15 W
Ambient Air Temperature For Operation:
-10-55 °C
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
China Rohs Regulation:
X
Maximum Line Resistance:
10 Ohm sensor power supply
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Sensor Power Supply:
U+, U- 24-24 V DC
Breaking Capacity:
20 mA 24 V solid state output || 1.5 A 24 V DC-13)50 ms relay output
Circularity Profile:
ENVEOLI1406024EN
Rohs Exemption Information:
Yes
Mercury Free:
Yes
Input Compatibility:
XC limit switch muting function || XU2M18PP340... muting function || XU2S18PP340... (infrared) sensor || XU9M18PP340... muting function
Catalog:
View
Datasheet:
View
  • Schneider Electric XPSCM1144P Photocell Type 2 Safety M
  • Schneider Electric XPSCM1144P Photocell Type 2 Safety M
$750.00

Description

This XPSCM safety module is for monitoring of single-beam photo-electric sensors and has a built-in "muting" function. It meets the requirements of PL c/Category 2 conforming to EN/ISO 13849-1.and SILCL1 conforming to EN/IEC 61508 and EN/IEC 62061. Used in conjunction with XU2S single-beam photo-electric sensors (periodically tested), it establishes a category 2 light curtain conforming to IEC/EN 61496 parts 1 and 2.
View AllClose