Schneider Electric XPSMCMCO0000EIG Ethernet/Ip, Diagnostic Exp. Spring Term

(No reviews yet) Write a Review
SKU:
XPSMCMCO0000EIG
UPC:
3606480748394
Condition:
New
Mounting Support:
omega 35 mm DIN rail EN 50022
Ip Degree Of Protection:
IP20
Quality Labels:
CE
Overvoltage Category:
II
Local Signalling:
LED green PWR power ON || LED green RUN operating || LED red E IN internal error || LED red E EX external error || LED green/red NET connection state || LED green/red STS communication status
Method Of Access:
server
Mercury Free:
Yes
Number Of Port:
1
Product Certifications:
cULus || RCM || TÜV
Device Short Name:
XPSMCM
Environmental Disclosure:
ENVPEP1409010EN
Power Dissipation In W:
3 W
Range Of Product:
Modicon MCM
Pvc Free:
Yes
Insulation:
250 V AC between power supply and housing IEC 61800-5-1
Shock Resistance:
10 gn 16 ms) 1000 shocks on each axis IEC 61496-1
Range Compatibility:
Preventa XPSMCM
Cable Cross Section:
0.2-2.5 mm² - AWG 24...AWG 14 flexible without cable end || 0.25-2.5 mm² - AWG 23...AWG 14 flexible with cable end, with bezel || 0.25-2.5 mm² - AWG 23...AWG 14 flexible with cable end, without bezel || 0.2-2.5 mm² - AWG 24...AWG 14 solid without
Maximum Cable Distance Between Devices:
100 m
Sustainable Offer Status:
Green Premium product
Operating Altitude:
6561.68 ft (2000 m)
Relative Humidity:
10-95 %
Circularity Profile:
ENVEOLI1409010EN
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Communication Port Protocol:
Ethernet TCP/IP
Connector Type:
RJ45
Service Life:
20 year(s)
Electromagnetic Compatibility:
electrostatic discharge immunity test - test level: 6 kV (on contact) conforming to IEC 61000-4-2 || electrostatic discharge immunity test - test level: 20 kV (on air) conforming to IEC 61000-4-2 || susceptibility to electromagnetic fields - test lev
China Rohs Regulation:
X
Connections - Terminals:
2 spring clamp terminals, removable terminal block
Product Or Component Type:
non-safe communication module
Reach Regulation:
Free of Substances of Very High Concern above the threshold
Net Weight:
0.3 kg
[Us] Rated Supply Voltage:
24 V - 20...20 % DC
Vibration Resistance:
+/-0.35 mm 10-55 Hz)IEC 61496-1
Pollution Degree:
2
Reach Free Of Svhc:
Yes
Ambient Air Temperature For Storage:
-20-85 °C
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Rohs Exemption Information:
Yes
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Width:
22.5 mm
Ambient Air Temperature For Operation:
-10-55 °C
Height:
99 mm
Current Consumption:
0.125 mA
Transmission Rate:
10/100 Mbit/s
Depth:
114.5 mm
Catalog:
View
Datasheet:
View
$646.00

Description

This Modicon MCM standard ("non-safe") communication module has one 1 Ethernet IP connection with a RJ45 connector. It is designed to monitor remotely your safety system with the commonly used Ethernet/IP protocol, without additional gateways. It offers 2 RJ45 ports. It has a rated supply voltage of 24V DC. It is furnished with spring clamp terminals, removable terminal block for electrical connection. It is an IP20 rated product. The non-safe communication modules are designed for diagnostics connection and data communication purposes to machine field bus or network systems. Its transmission rate varies from 10Mbit/s to 100Mbit/s. This communication module is connected to the safety controller via the backplane expansion connector. It weighs 0.3kg. Its dimension are 22.5mm (Depth), 99mm (Height) and 114.5mm (Width). Its housing is red. It is powered with 24 VDC. The maximum cable distance between two devices varies from 250m to 2500m. This Modicon MCM standard ("non-safe") communication module is certified by RCM, CULus and TÜV. Compatible accessories for Modicon MCM module are a memory card and the backplane connector. The communication module instals on Omega 35mm DIN rail conforming to EN 50022, and is connected to the safety controller via the backplane expansion connector. The Modicon MCM modular safety controller system provide flexibility and scalability from 8 inputs, 2 dual/4 single channel outputs up to 128 inputs, 16 dual/32 single channel outputs, up to 32 or 48 diagnostic status outputs. Modicon MCM modular safety controller system are designed to monitor multiple safety functions on and around a machine to minimise the risk of people accessing the dangerous moving parts of the machine.
View AllClose