SMC 11-LEFS32B-200B-S3AP | Clean Room Electric Actuator LEFS Series Ball Screw 32mm Width 200mm Stroke B-Motor S3AP Controller Config
SMC
$1,890.00
The SMC 11-LEFS32B-200B-S3AP is a clean room specification electric actuator from the LEFS series with B-type motor and S3AP controller configuration. Part number decoded: LEFS = LEFS series ball screw electric actuator, 32 = 32mm width, B = B-type servo motor, 200 = 200mm stroke, B = additional specification, S3AP = controller interface configuration (S3 = controller interface type, AP = specific communication protocol or cable assembly designation).
The S3AP configuration specifies both the controller interface standard (S3) and the communication/cable protocol (AP). This determines how the actuator communicates with the motion controller signal types, connector pinout, and communication protocol. The AP designation may indicate analog positioning, parallel I/O, or a specific SMC controller communication standard. Correct S-suffix selection ensures the actuator integrates seamlessly with the equipment's existing motion control architecture.
The LEFS32B-200B-S3AP provides B-type motor operation with S3AP controller interface at 32mm width and 200mm stroke. For the A-type motor with S3 interface, the LEFS32A-400B-S3C918 shows a JXC-compatible S3 variant. For B-motor without specific controller interface, the LEFS32B-200B provides the base unit. For longer stroke with S3AP, specify larger stroke values with the same suffix. Always match the S-suffix to your installed controller model and communication standard. Clean series (11-). RoHS compliant.
- Series:
- 11-LEFS (Clean Room)
- Actuator Type:
- Electric Slider Ball Screw
- Drive:
- Ball Screw Servo Motor
- Width:
- 32mm
- Stroke:
- 200mm
- Motor Type:
- B
- Configuration:
- S3AP
- Positioning:
- High Precision Multi-Point
- Clean Room Grade:
- Enhanced (11-)
- Certifications:
- RoHS
