SMC ZL112A-K15LZ Multistage Vacuum Ejector with Valve, Ø1.2mm Nozzle, 24 VDC

SMC ZL112A-K15LZ Multistage Vacuum Ejector with Supply/Release Valves, 24 VDC

The SMC ZL112A-K15LZ is a multistage vacuum ejector from the ZL1 series, designed to generate vacuum from compressed air for pick-and-place and material handling. Its 3-stage diffuser construction delivers a high suction flow rate with lower air consumption than a single-stage ejector. This configuration includes an integrated supply valve and release valve for vacuum on/off and vacuum-break control, a built-in silencer, and a 24 VDC solenoid with an L-type plug connector.

Key Specifications

• Multistage ejector with 3-stage diffuser construction for high flow and reduced air consumption
• Nozzle diameter: Ø1.2 mm
• Maximum suction flow rate: 100 L/min (ANR)
• Air consumption: 57 L/min (ANR)
• Integrated supply valve (normally closed) and release valve (normally closed) for vacuum generation and vacuum-break control
• Rated voltage: 24 VDC, with light and surge voltage suppressor
• Electrical entry: L-type plug connector with 300 mm lead wire
• Non-locking push-type manual override
• Built-in silencer exhaust
• Supply (P) port: Ø6 one-touch fitting; Vacuum (V) port: Ø12 one-touch fitting
• Vacuum pressure gauge unit: kPa (no vacuum pressure switch in this configuration)

Part Number Breakdown

• ZL112A: ZL1-series multistage ejector, Ø1.2 mm nozzle
• K1: supply valve (N.C.) and release valve (N.C.)
• 5: 24 VDC rated voltage
• L: L-type plug connector with 300 mm lead wire
• Z: with light and surge voltage suppressor

Applications

Vacuum pick-and-place, robotic end-of-arm tooling, packaging, and workpiece handling. The integrated supply valve lets the ejector draw air only while gripping to save energy, and the release valve provides a fast vacuum break for quick, reliable workpiece release.

Automation Distribution is an authorized SMC distributor supplying ZL series vacuum ejectors to manufacturers and integrators across the US.