WAGO 2001-1201 2-conductor through terminal block; 1.5 mm²; suitable for Ex e II applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP; 1,50 mm²; gray
Wago
$1.50
TOPJOBS feedthrough terminal block; rail mount; 2-conductor; 4.2 mm wide; gray.
The WAGO 2001 TOPJOB S series feed-through terminal block is a gray, single-deck unit with side and center marking slots, designed for Ex e II applications. It features one feed-through pole accommodating two wires via push-in connections, suitable for wire sizes ranging from 0.25mm² to 2.5mm² or #22AWG to #14AWG. The terminal block supports a nominal cross-section of 1.5mm² and is rated for currents of 18A and 24A. It utilizes Push-in CAGE CLAMP spring connections and mounts on a DIN-35 rail with dimensions of 35 x 15 or 35 x 7.5, having a width of 4.2mm. This model is equivalent to the 20011201.
- baud rate:
- Copper cable: 10/100 Mbit/s
- color:
- Black
- communication standards:
- IEEE 802.3 10BASE-T || IEEE 802.3u 100BASE-TX || IEEE 802.3x Flow Control
- configuration options:
- DIP switch for signal contact
- conformity marking:
- CE
- connection technology communication fieldbus:
- Copper cable: 5 x RJ-45
- connection technology supply:
- 1 x Built-in male connector: 231-436/001-000: included female connector (MCS Connectors): 231-106/026-000
- controls:
- 8 x DIP switch: Alarm function power supplies and ports 1 5, QoS function port 1
- country of origin sales organisation germany:
- TW
- depth:
- 120 mm / 4.724 inch
- diagnostics:
- Signal contact
- emc emission of interference:
- Per EN 61000-6-4
- emc immunity to interference:
- Per EN 61000-6-2
- esd contact air discharge:
- 8 KV / 15 KV
- fire load:
- 0.000 MJ
- height:
- 105 mm / 4.134 inch
- housing material:
- Aluminum
- indicators:
- Device: LED (PWR, RPS) green: Power supply (primary), redundant power supply (secondary): LED (ALM) red: Alarm: per port: LED (100, LNK/ACT) green: Status 100 Mbps, LNK/ACT ports 1 5
- jumbo frame size:
- 1536 Byte
- mac table size:
- 2000 addresses
- mounting type:
- DIN-35 rail
- number of 100base tx ports:
- 5
- packaging type:
- Box
- power consumption max:
- 3.84 W
- power consumption typ 24 v:
- 3.36 W
- protection type:
- IP30
- redundancy function:
- Redundant DC power supply
- relative humidity without condensation:
- 0.95
- shock resistance:
- Per IEC 60068-2-27
- supply voltage:
- 9 48 VDC: Cable length:< 3 m
- surrounding air temperature operation:
- -40 70 C (UL max. +60 C)
- surrounding air temperature storage:
- -40 80 C
- switching mode:
- Storeandforward: non-blocking
- transmission medium communication fieldbus:
- Copper cable: Cat. 5 or higher, 100 m maximum cable length
- vibration resistance:
- Per IEC 60068-2-6
- weight:
- 613.300 g
- width:
- 50 mm / 1.969 inch
