WAGO 2001-1411/1000-411 Component terminal block; 4-conductor; with diode 1N4007; anode, right side; for DIN-rail 35 x 15 and 35 x 7.5; 1.5 mm²; Push-in CAGE CLAMP; 1,50 mm²; gray
Wago
$8.27
Diode terminal block; 1N4007 (NP); rail mount; 4-conductor; 4.2 mm wide; gray.
The WAGO 2001 TOPJOB S series component feed-through terminal block is a single-deck unit featuring a diode (1N4007) with the anode on the right side, and includes side and center marking slots. It has one disconnect feed-through pole and accommodates four wires (two push-in connections on each side) with a nominal cross-section of 1.5mm², suitable for wire sizes ranging from 0.25mm² to 2.5mm² or #22AWG to #14AWG. The terminal block supports a rated current of 0.5A and utilizes Push-in CAGE CLAMP spring connections. It is designed for mounting on a DIN-35 rail (35 x 15 / 35 x 7.5) and has a width of 4.2mm.
- actuation type:
- Push-in || Operating tool
- approvals per:
- UL 1059
- color:
- Gray
- connectable conductor materials:
- Copper
- connection technology:
- Push-in CAGE CLAMP
- country of origin sales organisation germany:
- CN
- depth from upper edge of din rail:
- 32.9 mm / 1.295 inch
- design:
- Horizontal type
- fine stranded conductor:
- 0.25 2.5 mm / 22 14 AWG
- fine stranded conductor with ferrule push in termination:
- 0.75 1.5 mm / 18 16 AWG
- fine stranded conductor with insulated ferrule:
- 0.25 1.5 mm / 22 16 AWG
- fire load:
- 0.019 MJ
- flammability class per ul94:
- V0
- height:
- 69.9 mm / 2.752 inch
- insulation material:
- Polyamide (PA66)
- marking level:
- Center/side marking
- mounting type:
- DIN-35 rail
- nominal cross section:
- 1.5 mm
- note conductor cross section:
- Depending on the conductor characteristic, a conductor with a smaller cross-section can also be inserted via push-in termination.
- packaging type:
- Box
- rated current:
- 0.5 A
- rated current ul use group b:
- 15 A
- rated current ul use group c:
- 15 A
- rated voltage ul use group b:
- 600 V
- rated voltage ul use group c:
- 600 V
- ratings per:
- IEC/EN 60947-7-1
- solid conductor:
- 0.25 2.5 mm / 22 14 AWG
- solid conductor push in termination:
- 0.75 2.5 mm / 18 14 AWG
- strip length:
- 9 11 mm / 0.35 0.43 inch
- weight:
- 6.210 g
- width:
- 4.2 mm / 0.165 inch
- wiring direction:
- Front-entry wiring
