|
Description | 4-conductor diode terminal block; with diode 1N4007 |
Remarks | |
|
Item properties | Miscellaneous Name | Value | Unit | Total number of connection points | 4 | | Total number of potentials | 1 | | Color | gray | | Ratings per | IEC/EN 60947-7-1 | | Rated current [A] | 0.5 | A | Nominal voltage [V] | 250 | V | Reverse voltage [V] | 1000 | V | Number of levels | 1 | | Connection technology | Push-in CAGE CLAMP | | Number of connection points connector | 4 | | Actuation type | Operating tool | | Connectable conductor materials | Copper | | Nominal cross section | 2.5 mm nbsp; | | Solid conductor | 0.25 4 mm / 22 12 AWG | | Solid conductor, push-in termination | 0.75 4 mm / 18 12 AWG | | Fine-stranded conductor | 0.25 4 mm / 22 12 AWG | | Fine-stranded conductor with ferrule, push-in termination fr | 0.75 mm / 18 AWG | | Strip length | 10 12 mm / 0.39 0.47 Inch | | Type of wiring | Front-entry wiring | | Design | horizontal | | Marking level | Center/side marking | | Insulating material | Polyamide 66 (PA 66) | | Fire load [MJ] | 0.173 | MJ | Weight [g] | 7.7 | g | Width | 5.2 mm / 0.205 Inch | | Height from upper-edge of DIN-35 rail | 32.9 mm / 1.295 Inch | | Depth | 69.9 mm / 2.752 Inch | | Type of mounting | DIN-35 x 15 carrier rail | | |
.
The WAGO 2002 TOPJOB S series component feed-through terminal block is a gray, single-deck unit featuring a diode (1N4007) with the anode on the left side. It includes side and center marking slots and supports one disconnect feed-through pole for four wires (two push-in connections on each side). The terminal block accommodates wire sizes from 0.25mm² to 4mm² (#22AWG to #12AWG) with a nominal cross-section of 2.5mm² and a rated current of 0.5A. It utilizes Push-in CAGE CLAMP spring connections and is designed for mounting on a DIN-35 rail (35 x 15 / 35 x 7.5) with a width of 5.2mm. The product is equivalent to part number 200214111000410.