WAGO 260-202 4-conductor terminal strip; 2-pole; without push-buttons; with fixing flanges; for screw or similar mounting types; Fixing hole 3.2 mm Ã; 1.5 mm²; CAGE CLAMP; 1,50 mm²; gray
Wago
$2.69
(No reviews yet)
Write a Review
Write a Review
Wago
WAGO 260-202 4-conductor terminal strip; 2-pole; without push-buttons; with fixing flanges; for screw or similar mounting types; Fixing hole 3.2 mm Ã; 1.5 mm²; CAGE CLAMP; 1,50 mm²; gray
4-conductor terminal strip; without push-buttons; with fixing flanges; 2-pole; for screw or similar mounting types; Fixing hole 3.2 mm Ã; 1.5 mm²; CAGE CLAMP; 1,50 mm²; gray.
The WAGO 260 series feed-through terminal strip is a gray, 1-deck/level component with two feed-through poles and eight wire connections (four clamps on each side). It accommodates wire sizes from 0.08mm² to 1.5mm² or #28AWG to #16AWG and supports a rated current of 18A. The terminal strip features CAGE CLAMP spring connections and has a 3.2mm fixing hole for mounting, equivalent to model 260202.
- conformity marking:
- CE
- connection technology:
- Push-in CAGE CLAMP
- control deviation:
- ¤ 3 %
- country of origin sales organisation germany:
- DE
- depth:
- 94 mm / 3.701 inch
- derating:
- No derating
- efficiency typ:
- 82.5 % (At nominal input voltage and nominal output)
- fine stranded conductor:
- 0.34 2.5 mm / 22 14 AWG
- fire load:
- 0.000 MJ
- height from upper edge of din rail:
- 97.8 mm / 3.85 inch
- input current ii:
- ¤ 0.34 A
- input voltage range:
- DC 10 30 V
- inrush current:
- ¤ 0.5 A (at nominal input voltage)
- internal fuse:
- No
- load regulation:
- ¤ 1 %
- mounting type:
- DIN-35 rail
- mtbf:
- > 1,800,000 h
- nominal input voltage ui nom:
- DC 24 V
- nominal mains frequency range:
- 0 Hz
- nominal output current io nom:
- 0.5 A
- nominal output power:
- 2.5 W
- nominal output voltage uo nom:
- DC 5 V
- number of jumper slots:
- 8
- open circuit proof:
- Yes
- operation status indicator:
- Green LED (Uo) || Red LED (short circuit)
- output voltage range:
- 3 %
- packaging type:
- Bag
- parallel operation:
- No
- pollution degree:
- 2
- power loss pl:
- ¤ 0.13 W (No load): ¤ 0.6 W (Nominal load)
- protection class:
- III
- protection type:
- IP20 (per EN 60529)
- relative humidity:
- ¤ 95% (no condensation permissible)
- residual ripple:
- ¤ 20 mV (Peak-to-peak)
- resistance to reverse feed:
- ¤ DC 16 V
- reverse voltage protection:
- Yes
- series operation:
- No
- short circuit protected:
- Yes
- signaling:
- 1 x LED DC OK (green) || 1 x Short circuit LED (red) || 1 x Active signal output (Ui, max. 4 mA)
- solid conductor:
- 0.08 2.5 mm / 28 14 AWG
- standards specifications:
- EN 61000-6-2 || EN 61000-6-3 || EN 60950-1 || UL 61010-2-201
- strip length:
- 9 10 mm / 0.35 0.39 inch
- surrounding air temperature operation:
- -25 70 C
- surrounding air temperature storage:
- -40 85 C
- wago connector:
- WAGO 857 Series
- weight:
- 49.488 g
- width:
- 6 mm / 0.236 inch
