WAGO 264-351 4-conductor center terminal block; without push-buttons; 2.5 mm²; CAGE CLAMP; 2,50 mm²; gray

4-conductor center terminal block; required between end plate and end terminal block for terminal strips with fixing flanges

Electrical Data

• Rated voltage (III / 3): 800 V
• Rated impulse voltage (III / 3): 8 kV
• Rated current: 24 A
• Legend (ratings): (III / 3) Overvoltage category III / Pollution degree 3

Connection Data

• Connection technology: CAGE CLAMP
• Actuation type: Operating tool
• Connectable conductor materials: Copper
• Solid conductor: 0.08 2.5 mm / 28 12 AWG
• Fine-stranded conductor: 0.08 2.5 mm / 28 12 AWG
• Strip length: 8 9 mm / 0.31 0.35 inch
• Total number of connection points: 4
• Total number of potentials: 1
• Number of levels: 1
• Type of wiring: Front-entry wiring
• Note (conductor cross-section): 12 AWG: THHN, THWN

Geometrical Data

• Width: 10 mm / 0.394 inch
• Height from the surface: 22.1 mm / 0.87 inch
• Depth: 32 mm / 1.26 inch

Mechanical Data

• Design: horizontal
• Mounting type: Mounting flange
• Marking level: Center marking

Material Data

• Color: gray
• Fire load: 0.114 MJ
• Weight: 6.412 g

Commercial data

• Packaging type: BOX
• Country of origin: CH
• GTIN: 4044918414746
• Customs Tariff No.: 85369010000

.

The WAGO 264 series feed-through center terminal block is a gray, single-deck component with a center marking slot, designed for one feed-through pole and accommodating four wires using two clamps on each side. It supports wire sizes from 0.08mm² to 2.5mm² or #28AWG to #12AWG, and is rated for a current of 24A. The terminal block features CAGE CLAMP spring connections and is equivalent to model 264351.