WAGO 280-989 Double potential terminal block; 2.5 mm²; suitable for Ex e II applications; lateral marker slots; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP; 2,50 mm²; light gray
Wago
$5.12
(No reviews yet)
Write a Review
Write a Review
Wago
WAGO 280-989 Double potential terminal block; 2.5 mm²; suitable for Ex e II applications; lateral marker slots; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP; 2,50 mm²; light gray
Double potential terminal block; 2.5 mm; suitable for Ex e II applications; lateral marker slots; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMPp>
- Automatically destroys the oxide film during clamping.
- Prevents fresh oxidation at the clamping point.
- Prevents electrolytic corrosion between aluminum and copper conductors (in the same terminal block).
- Provides long-term protection against corrosion.
The WAGO 280 series double potential feed-through terminal block is a light gray, 1-deck/level component with side marking slots, suitable for Ex e II applications. It features two feed-through poles (2P) with four wires (2 clamps + 2 clamps) and supports wire sizes from 0.08mm² to 2.5mm² or #28AWG to #12AWG. The terminal block is rated for a current of 22A and utilizes CAGE CLAMP spring connections. It is designed for mounting on a DIN-35 rail (35 x 15 / 35 x 7.5) with a width of 5mm, equivalent to model 280989.
- actuation type:
- Operating tool
- connectable conductor materials note:
- Terminating Aluminum ConductorsWAGO spring clamp terminal blocks are suitable for solid aluminum conductors up to 4 mm/12 AWG if WAGO Alu-Plus Contact Paste is used for termination.Alu-Plus Contact Paste Advantages:Automatically
- color:
- Light gray
- connectable conductor materials:
- Copper || Aluminum
- connection technology:
- CAGE CLAMP
- country of origin sales organisation germany:
- DE
- depth from upper edge of din rail:
- 28 mm / 1.102 inch
- design:
- Horizontal type
- fine stranded conductor:
- 0.08 2.5 mm / 28 12 AWG
- fire load:
- 0.142 MJ
- flammability class per ul94:
- V0
- height:
- 73 mm / 2.874 inch
- insulation material:
- Polyamide (PA66)
- marking level:
- Side marking
- mounting type:
- DIN-35 rail
- note conductor cross section:
- 12 AWG: THHN, THWN
- packaging type:
- Box
- rated current ex e ii:
- 22 A
- rated voltage en ex e ii:
- 550 V
- ratings per:
- IEC/EN 60947-7-1
- safety information 1:
- Notice: This double potential terminal block cannot be commoned via adjacent jumpers.
- solid conductor:
- 0.08 2.5 mm / 28 12 AWG
- strip length:
- 8 9 mm / 0.31 0.35 inch
- weight:
- 8.191 g
- width:
- 5 mm / 0.197 inch
- wiring direction:
- Front-entry wiring
