Description
3-conductor through terminal block; 6 mm®; with test option; same profile as 3-conductor disconnect terminal block; center marking; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMPp>
View AllClose
Electrical Data
- Rated voltage (III / 3): 800 V
- Rated impulse voltage (III / 3): 8 kV
- Rated current: 41 A
- Legend (ratings): (III / 3) Overvoltage category III / Pollution degree 3
Connection Data
- Connection technology: CAGE CLAMP<sup></sup>
- Actuation type: Operating tool
- Connectable conductor materials: Copper
- Solid conductor: 0.2 6 mm / 24 10 AWG
- Fine-stranded conductor: 0.2 6 mm / 24 10 AWG
- Strip length: 12 13 mm / 0.47 0.51 inch
- Total number of connection points: 3
- Total number of potentials: 1
- Number of levels: 1
- Type of wiring: Front-entry wiring
Geometrical Data
- Width: 8 mm / 0.315 inch
- Height from upper-edge of DIN-35 rail: 32.5 mm / 1.28 inch
- Depth: 85 mm / 3.346 inch
Mechanical Data
- Design: Angled
- Type of mounting: DIN-35 rail
- Marking level: Center marking
Material Data
- Color: gray
- Insulating material: Polyamide 66 (PA 66)
- Fire load: 0.313 MJ
- Weight: 19.765 g
Commercial data
- Packaging type: BOX
- Country of origin: CN
- GTIN: 4050821234548
- Customs Tariff No.: 85369010000
The WAGO 282 series feed-through terminal block is a gray, single-deck unit with a center marking slot and a test point. It features one feed-through pole and accommodates three wires using one clamp and two additional clamps, suitable for wire sizes ranging from 0.2mm² to 6mm² or #24AWG to #10AWG. The terminal block supports a rated current of 41A and utilizes CAGE CLAMP spring connections. It is designed for mounting on a DIN-35 rail (35 x 15 / 35 x 7.5) and has an 8mm width, equivalent to model 282699.
